• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.481-488
• /
• 2009

GIS is used to isolate large power electrical equipment using SF6 gas. While GIS has simple structure, it has few break down, relatively high reliability. But it is hard to check up faults for reason of pressure. Faults of GIS should have a ripple effect on community and be hard to recovery. Consequently, GIS imports a preventive diagnostic system to find internal faults in advance. It is most important that reliability on the GIS preventive diagnostic system, because it estimates abnormality of system by analysis result of collected data. But, exist system which used central data management is low efficiency, and hard to guarantee timeliness and accuracy of data. To guarantee timeliness and accuracy, the GIS preventive diagnostic system needs accordingly to use a real-time middleware. So, in this paper, to improve reliability of the GIS preventive diagnostic system, we use a middleware based on TMO for guaranteeing timeliness of real-time distributed computing. And we propose an improved GIS preventive diagnostic system applying data acquisition, monitoring and control methods based on the TMO model. The presented system uses the Communication Control Unit(CCU) for distributed data handling which is supported by TMO. CCU can improve performance of the GIS preventive diagnostic system by guaranteeing timeliness of data handling process and increasing reliability of data through the TMO middleware. And, it has designed to take full charge of overload on a data acquisition task had been processed in an exist server. So, it could reduce overload of the server and apply distribution environment from now. Therefore, the proposed system can improve performance and reliability of the GIS preventive diagnostic system and contribute to stable operation of GIS.

• Land and Housing Review
• /
• v.2 no.3
• /
• pp.249-258
• /
• 2011

In order to achieve an efficient urban regeneration of the nation, it is required to determine the extent of decline nation-wide and the declined areas for each district and also to evaluate the potentials of the concerned areas. For this task to be accomplished, a construction of a comprehensive diagnostic system based on spatial information considering diversity and complexity is required. In this study, a total information system architecture for urban regeneration is designed as part of the construction of such a diagnostic system. In order to develop the system, a city and district level unit decline diagnostic indicators has been constructed and a decline diagnostic system has been developed. Also, a scheme to promote the advancement of the system is proposed. The DB construction is based on the city and district level nation-wide and metadata for the concerned level is constructed as well. The system is based on the Open API and designed to be flexible for extension. Also, an RIA-based intuitive UI has been implemented. Main features of the system consist of the management of the indicators, diagnostic analysis (city and district level decline diagnosis), related information, etc. As for methods for the advancement, an information model in consideration of the spation relations of the urban regeneration DB has been designed and application methods of semantic webs. Also, for improvement methods for district unit analytical model, district level analysis models, GIS based spatial analysis platforms and linked utiliation of KOPSS analysis modules are suggested. A use of a total information system for urban regeneration is anticipated to facilitate concerned policy making through the identification of the status of city declines to identify and the understanding of the demands for regeneration.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• Education of Primary School Mathematics
• /
• v.26 no.1
• /
• pp.45-63
• /
• 2023

The activity of finding rules is useful for enhancing the algebraic thinking of elementary school students. This study analyzed the pattern activities of a finding rules unit in 10 different government-authorized mathematics curricular materials for fourth graders aligned to the 2015 revised national mathematics curriculum. The analytic elements included three main activities: (a) activities of analyzing the structure of patterns, (b) activities of finding a specific term by finding a rule, and (c) activities of representing the rule. The three activities were mainly presented regarding growing numeric patterns, growing geometric patterns, and computational patterns. The activities of analyzing the structure of patterns were presented when dealing mainly with growing geometric patterns and focused on finding the number of models constituting the pattern. The activities of finding a specific term by finding a rule were evenly presented across the three patterns and the specific term tended to be close to the terms presented in the given task. The activities of representing the rule usually encouraged students to talk about or write down the rule using their own words. Based on the results of these analyses, this study provides specific implications on how to develop subsequent mathematics curricular materials regarding pattern activities to enhance elementary school students' algebraic thinking.

• Korean Journal of Human Ecology
• /
• v.12 no.3
• /
• pp.303-319
• /
• 2003

This study was designed to examine the extent of job-related stress and job satisfaction and factors affecting job satisfaction of educare center teachers. Special attention was given to the differences due to the various organizational types of educare centers. Two hundred and twenty two public and private educare center teachers of C city were drawn as samples of this study. Self-administered questionnaire method containing items (m job-related stress, Job satisfaction and socio-demographic background was employed and the data were analyzed with SPSSWlN using descriptive statistics, factor analysis and regression analysis. Findings suggested that the major job-related stresses were related to work experiences, working hours, and the number of on-the-job training opportunities. Work place characteristics such as the total number of children in the class, working hours and wage also affected the level of Job satisfaction. Additionally significant statistical differences were found on the job-related stress and the job satisfaction between teachers in public and private educare centers. In the question of the effect of job-related stress on the job satisfaction, job-related stress explained 12% of work-satisfaction, 33% of satisfaction related to the current working place. Accordingly it was possible to draw a conclusion that educare center teachers' job-related stresses. were not ascribed by personal characteristics but by work-related factors such a, poor administrative support low wage and the overwhelming task related stressors The main stressor of job satisfaction was poor administrative support. Differences on job-related stress and job satisfaction_between among teachers of public and private unit were distinctive throughout the study. These results, implicate that workshops are recommended to help diminish the job-related stress among educare center teachers. It is imperative that enhanced work benefits and improved working environment will in turn enhance the quality of services in educare centers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1208-1213
• /
• 2006

A micro embedded did the task to be simply the sequent at the past. The necessity of an embedded operating system did not exist in the reason. We satisfy the complication of the system and operating system have been desired for the officer of the process. The necessity of the process of real-time processing increased also with fast response time to users, The porting follows and have been composed of an real-time embedded operating system. We can control the control unit with the sensor to be established in the building, An embedded web sever to use the resource of the at least is appering a networking facility of interaction. In this paper, The web sever to be implemented in a purity software. We draw data for the thing to implement overall demo to the remote through Internet and We put the point even though we organized the frame to control this. we have successfully ported linux on an embedded system, which is based on intel StrongARM SA-1110 processor, then written several network modules of ethernet-based network device.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.4
• /
• pp.273-283
• /
• 2015

In this study, we suggested the methodology and the results of planning of promising technologies in mechanical engineering by focusing on the case of the Korea Institute of Machinery and Materials (KIMM). For dedicated commitment to planning of promising technologies, KIMM newly introduced task-force called as 'specialist unit'. In addition, KIMM combined the investigation of external environments with the analysis of internal capabilities of KIMM and utilized the bibliographic coupling analysis in the process of the exploring sub themes. Finally, we provided 8 promising fields and their sub themes in the mechanical engineering. Our study contributed to the strategic development of the main research programs of KIMM. Our findings can be also utilized as the best practice of planning of promising technologies in the field of mechanical engineering.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.117-138
• /
• 2018

The purpose of this study is to empirically analyze the relationships between the Boundary Spanning Activities (BSA) of project team and system performance in ERP system development projects. We could theoretically classify the BSA in the ERP development projects into five categories on the basis of existing studies on the BSA in the research fields of organization theory, new product development, and information systems development. These five categories are 'Ambassador' activities, 'Task-coordinator' activities, 'Scout' activities, 'Sentry' activities and 'Guard' activities. And the relationship between the implementation level of activities included in each category and the project performance (system usage and users' satisfaction) was hypothesized with respect to five BSA categories. In order to test the hypotheses, we conducted on/offline survey of the participants who were involved in the ERP system development projects, and received 345 valid responses. The unit of analysis was the project team, and the total number of teams that survey participants belonged to were 103 ones. The Structural Equation Model Analysis using the SMART PLS 3.0 was applied to statistically testing the hypotheses. The results showed that 10 hypotheses among 12 hypotheses could be supported. The theoretical implications of this study can be summarized as following; first, redefining and categorizing the BSA (Boundary Spanning Activities) in the ERP system development projects, secondly, deriving measurement indicators of the implementation level for each BSA category and statistically proving the validity and the reliability of them, and finally, suggesting the theoretical background of expanding the management area of ERP systems development projects. Furthermore, the practical implication of this study is that concrete BSA items which are empirically derived can be utilized as effective guidelines for successfully implementing the BSA in the process of managing the ERP system development projects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.12
• /
• pp.1113-1119
• /
• 2000

To operate a process plant safely and economically, process monitoring is very important. Process monitoring is the task to identify the state of the system from sensor data. Process monitoring includes data acquisition, regulatory control, data reconciliation, fault detection, etc. This research focuses on the data recon-ciliation using scale-space filtering and fault detection using functional-link associative neural networks. Scale-space filtering is a multi-resolution signal analysis method. Scale-space filtering can extract highest frequency factors(noise) effectively. But scale-space filtering has too large calculation costs and end effect problems. This research reduces the calculation cost of scale-space filtering by applying the minimum limit to the gaussian kernel. And the end-effect that occurs at the end of the signal of the scale-space filtering is overcome by using extrapolation related with the clustering change detection method. Nonlinear principal component analysis methods using neural network have been reviewed and the separately expanded functional-link associative neural network is proposed for chemical process monitoring. The separately expanded functional-link associative neural network has better learning capabilities, generalization abilities and short learning time than the exiting-neural networks. Separately expanded functional-link associative neural network can express a statistical model similar to real process by expanding the input data separately. Combining the proposed methods-modified scale-space filtering and fault detection method using the separately expanded functional-link associative neural network-a process monitoring system is proposed in this research. the usefulness of the proposed method is proven by its application a boiler water supply unit.

• Korean Journal of Cognitive Science
• /
• v.14 no.3
• /
• pp.1-11
• /
• 2003

Two experiments were conducted to investigate effects of target types and retinal eccentricity on the search of a target while both target and background stimuli were static or moving. A visual search task was used in both experiments. The retinal eccentricity was determined by five concentric circles increasing by the unit of 1.6 and the target was different from the background stimuli in either orientation(orientation target) or a distinctive feature(feature target). In Experiment 1 where both the target and background stimuli were presented statically, an interaction between retinal eccentricity arid target type was found. While search time of the orientation target was not affected by the retinal eccentricity, that of the feature target increased as the retinal eccentricity increased. In Experiment 2 where all stimuli were moving, the interaction effect was also found. But the reason was not the same as that in Experiment 1. In the moving condition, while the search time of the orientation target decreased consistently as the retinal eccentricity increased, that of the feature target was not affected by the retinal eccentricity. The implications and limitations of the present results were discussed with respects to the real world situations such as driving cars or flying airplanes.