• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.255-261
• /
• 2009

We need water equivalent unit data of snowfall for the purpose of forecast and hydrology related research area. This study developed new method of automatic recording snowfall as weight unit. The instrument designed for measuring weight of snowfall by stain-gauge loadcell. Field test of instrument carried out at Daegwallyeong Obs. Station from 22 Jan. to 22 Feb. 2007. During observation period there is 15.3 cm snow depth and 16.0 mm of accumulated water equivalent depth at Daegwallyeong Obs. Station on 13 to 14 Feb. 2007. But the instrument of this study recorded 22.1 mm of water equivalent depth. It is not easy to explain difference between Daegwallyeong and this study. Because this study is only one case of comparison of snow measurement and there is very little amount of snow observation research. The density of snowfall calculated from 0.09 to $0.15g/cm^3$ from the observation data of 13 to 14 Feb. 2007. There is high relation between radar echo and snowfall amount measured by weight unit. It can supports forecast of snowfall and development of numerical model for forecast.

• Atmosphere
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2009

We need water equivalent unit data of snowfall for the purpose of forecast and hydrology related research area. This study developed new method of automatic recording snowfall as weight unit with circle type plate using stain-gauge loadcell. Field test of instrument carried out at Daegwallyeong Obs. Station from 20 to 23 Jan. 2008 during heavy snowfall. There is 74.2cm snow depth and 54.6mm precipitation by Daegwallyeong Obs. Station. But the instrument of this study recorded 71.0mm of precipitation amount. Because of different observation method can cause more 15.4mm than Daegwallyeong Obs. Station. But this study gives the possibility of observation of new snow fall measurement under freezing conditions of snow. From the observation data the density of snowfall calculated from 0.09 to $1015g/cm_3$ from the observation period. And have a good relations between manual observation and automatic observation data from this study instrument with slope of 1.35 to 1.39.

• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1994

Wind load or snow load, acting on agricultural structures is working more sensitive than any other load and therefore plays an important role in determination of design loads of agricultural structures. In this study, unit snow weight, greatest gust speed and depth of snow fall were analyzed and applied to determine the amount of frames. The unit snow weights were statistically classified and calculated in the basis of mean temperature and showed considerable differences between the unit snow weights at below and above -1$^{\circ}C$. Equations for estimating greatest gust speed with fastest wind speed were developed for inland and seaside districts. The calculated values from developed equations were little higher than those from the current equation in general. The difference between the depths of snow cover and snow fall, which shows the possibility of reduction of design loads under the adequate management. Design wind speed estimated by a modified equation suggested the amount of frames less than those by current one, and the depth of snow fall as a design snow depth suggested the amount of frames more than those of snow cover. Therefore, it is very important to select the adequate design values considering the characteristics of agricultural structures.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.270-274
• /
• 2006

This study proposes a new method for automatic recording of snowfall by a mass unit which is required in weather forecast and hydrology research. In this method the weight of a buoyancy bar submerged in a liquid is measured by a strain-gauge loadcell. Field test results of the strain-gauge loadcell showed good stability as well as high accuracy. Indoor tests of the instrument using a large tank of 120 cm diameter and 25 cm height connected to a small tank measured the liquid level with a good stability, showing a measurement error of less than 0.1 mm in a 100 mm range. This method of water depth measurement is very useful in measuring snowfall because it has no limitation on the funnel size of the instrument. In addition, an antifreezing solution instead of water used in the tank makes a heating system for melting snow unnecessary.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.520-529
• /
• 2014

Experiment was set up to analyze bycatch and discards situation including snow crap Chionoecetes opilio of whelk trap. Four types of trap were used: drum type trap with PE net; drum type trap with PBS net; cylinder type trap with PE net; and cylinder type net with PBS net. Three funnels were attached in drum type trap and two funnels were used in cylinder type trap. A fleet of traps was consisted with one hundred traps. 25 traps of each type were set on a line in repeated sequence. Field experiments were conducted with 6 fishing operations in the Uljin waters, East Sea in July 2014. Catch of target whelks were 173,261 g and catch rate was 48.7% of total catch, while bycatch were 182,571 g, 51.3% of tatal catch. The catch rate of bycatch was 2.6% higher than that of target catch. Bycatch weight of snow crap was the highest as 142,987 g and formed about 40.2% of total catch, followed giant octopus, Enteroctopus dofleini, 31,762 g (8.9%). Bycatch rate of cylinder type trap was 2.3 times higher than that of drum type trap. Discard rate (discard/(discard+landing)) was 43.6%. Discard rate was the highest at cylinder type trap with PBS net as 63.1%, followed cylinder type trap with PE net as 47.9%, drum type trap with PE net as 33.4%, the lowest at drum type trap with PBS net as 22.1%.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.05a
• /
• pp.111-114
• /
• 1994

상대적으로 사하중에 비해서 활하중 영향이 민감하게 작용하는 농업시설의 경우, 경제성 및 안정성에 근거한 구조설계를 위해서는 활하중의 결정요인의 정확한 분석을 통한 합리적인 설계하중의 산정이 필요하다. 단위적설 중량은 적설심에 따른 구분을 사용한다면 대부분 적설심 50cm 이하의 범위에 속하기 때문에 일률적으로 1.0kg/cm/$m^2$ 을 적용해야 하지만, 정확한 적설하중 산정을 위해서 기온에 따른 단위 적설중량의 변화를 분석할 필요가 있다. (중략)

• Food Science and Industry
• /
• v.53 no.1
• /
• pp.69-83
• /
• 2020

For the development of the chitosan industry in Korea, the catch of red snow crabs caught on the east coast is rapidly decreasing. Therefore, it is urgent to develop raw materials that can replace the red snow crab as the top priority to solve the supply and demand problems, as well as wastewater treatment costs account for a large proportion of the cost of chitosan. In order to solve the problems, continuous research on biological extraction methods such as enzymatic extraction and microbial fermentation will increase production efficiency and lower unit cost as well as chemical extraction methods. Further efficient manufacturing method can be established. Establishing of novel techniques is indispensable for production of high-purity chitosan and the ability to regulate and separate the molecular weight, as well as joint research with industry, academia and research institute for the research and development of high-functional chitosan derivatives.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.19-27
• /
• 2023

The interest in greenhouse gases (GHG) emitted from all industries is emerging as a very important issue worldwide. This is affecting not only the global warming, but also the environmentally friendly competitiveness of the industry. The fisheries sector is increasingly interested in greenhouse gas emissions also due to the Paris Climate Agreement in 2015. Korean industry and government are also making a number of effort to reduce greenhouse gas emissions so far, but the effort to reduce GHG in the fishery sector is insufficient compared to other fields. Especially, the investigation on the GHG emissions from Korean fisheries did not carry out extensively. The studies on GHG emissions from Korean fishery are most likely dealt with the GHG emissions by fishery classification so far. However, the forthcoming research related to GHG emissions from fisheries is needed to evaluate the GHG emission level by species to prepare the adoption of Environmental labels and declarations (ISO 14020). The purpose of this research is to investigate which degree of GHG emitted to produce the species (swimming crab and snow crab) from various fisheries. Here, we calculated the GHG emission to produce the species from the fisheries using the life cycle assessment (LCA) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficients of the fisheries for the species are also calculated according to the fuel type. The GHG emissions from sea activities by the fisheries will be dealt with. Furthermore, the GHG emissions for producing the unit weight species and annual production are calculated by fishery classification. The results will be helpful to establish the carbon footprint of seafood in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.672-680
• /
• 2017

A solar photovoltaic system is composed of a module mounting structure, supporting trunk, and a control unit that supplies generated electrical power to an external power grid or a load. The efficiency of the system depends on the incident solar light, so the mounting structure is installed to face the sun. However, because the sun always moves, systems that track the sun have better efficiency than fixed systems. The structure experiences wind pressure, snow load, seismic load, and structure weight. The wind pressure has the most serious effect on the structure. The pressure was obtained using finite element method for various gaps between modules and angles between the panel and the ground. The wind pressure is lowest when the gap is zero, and it increases with the inclination angle. Based on the results, a mounting structure module was designed.