• KIEAE Journal
• /
• 제17권1호
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• 한국의료질향상학회지
• /
• 제1권2호
• /
• pp.60-72
• /
• 1994

Background: The number of outpatients visiting large university teaching hospitals has increased drastically with the introduction of a nationwide health care insurance in 1989 and the improvement of the socio-economic status of the population. This resulted in long waiting times for services, particularly prescribed drugs, which have been patients' chief complaints. Hospitals have tried to solve the problem with limited success because their approach lacked comprehensive research. The objective of this study is to investigate associations between waiting times and variables defining a total work system. Methods: Data for the outpatient pharmacy department in a tertiary care university teaching hospital located in Seoul was analyzed to achieve the study objective. Associations of pharmacy system variables -- work load, work force, pharmacist work schedule, machine problems, and inventory control -- with mean and 99th percentile of waiting times were examined by the hierarchical stepwise regression method. Day was a unit of the analyses. Results: The regression models explained 65.8% of variance in the mean waiting time and 61.34% in the 99th percentile of waiting times. The break-down of the printer for drug envelops, Automatic Tablet Counters (ATCs), and main computer system lasted longer than 30 minutes increased the mean for 7.7 minutes, 4.5 minutes, and 7.0 minutes, respectively, and the 99th percentile for 14.8 minutes, 9.0 minutes, and 15.7 minutes, respectively. Concerning the work force, study results showed that there were significant differences in the productivity of pharmacists with work experience more than three years, one to three years, and less than one year, and showed that peak time aid work by pharmacists at job assignments other than the outpatient pharmacy, part-time pharmacists, and the installation of ATCs were effective in reducing waiting times, Finally, study findings indicated that the operational policy of work assignment and rotation schedule, supply and inventory of drugs at work tables, and readiness for undisrupted work during the work hours could have a significant effect on waiting times. Conclusion: The study results indicated that efforts to reduce waiting times for prescribed drugs should be geared toward every components of the pharmacy work system ranging from work schedule of pharmacists and supply of dugs at work tables. These findings should provide hospital managers with right directions in battling the problem.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• Composites Research
• /
• 제21권6호
• /
• pp.8-14
• /
• 2008

가로등은 운전자의 안전을 위한 필수적인 도로 부속구조물이며, 대부분 강재 등주를 사용하고 있다. 강재등주는 부식이 발생하여 내구성을 감소시키고, 도시미관을 저해하므로 스테인레스 제품이나 주철재 등을 사용하기도 한다. 그러나 주철재 및 스테인레스 등주를 사용하더라도 부식에 대한 위험성을 완전히 배제할 수 없고, 높은 강도와 강성은 충돌시 운전자의 안전을 위협하는 요인이 되고 있다. 따라서 새로운 형태의 등주 시스템의 개발이 요구되고 있다. 기존 등주의 문제점을 보완하기 위해 최근 알루미늄 합금을 사용한 등주가 개발되어 사용되고 있다. 알루미늄은 재료적 특성상 단위중량당 강도가 높고 부식에 대한 저항성이 매우 커서 그 활용성을 크게 증대될 것으로 예측되나 강계에 비해 강성과 강도가 낮기 때문에 구조적 안전성에서 문제점이 제기되고 있어 구조거동에 대한 연구가 필요하다. 이 연구는 현재 가로등 등주로 사용되고 있는 강재 및 알루미늄 등주에 대한 휨, 압축실험 등을 수행하여 알루미늄 등주의 구조거동을 조사하였고, 기존 강재등주와 비교하여 효율성 및 안전성을 평가하였다.

• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.175-185
• /
• 2011

Ultrafiltration is an emerging technology for drinking water treatment because it produces better water quality as compared with conventional treatment systems. More recently, the combination of UF technology with other processes in order to improve its performance has been observed. These associations aim to maximize the contaminants removal and reduce membrane fouling. The operational performance of contaminants removal and water production of two UF pilot plants was compared. The first plant (Guarapiranga) was fed with raw water and the second plant (ABV) with pre-treated water by the coagulation, flocculation and sedimentation processes at Alto da Boa Vista WTP (Sao Paulo, Brazil). Both units operated continuously for approximately 2,500 hours, from September/2009 to January/2010. The results showed that the ABV UF pilot plant was able to operate at higher specific fluxes (6.2 $L.d^{-1}.m^{-2}.kPa^{-1}$ @ $25^{\circ}C$) than Guarapiranga (3.1 $L.d^{-1}.m^{-2}.kPa^{-1}$ @ $25^{\circ}C$). However, the number of chemical cleanings conducted in both pilot units during the considered operation period was the same (4 chemical cleanings for each plant), which shows that the pre-treatment reduced the membrane fouling. The water quality at ABV for all the variables analyzed was better, but the feed water quality was also better due to pretreatment. The rejection values for the different contaminants were higher at Guarapiranga mainly because of a pollution load reduction after pre-treatment at ABV. Even with the better performance of the ABV UF pilot plant, it is necessary to take into consideration the complexity of the complete treatment system, and also the costs involved in the construction and operation of a full-scale treatment unit.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.445-452
• /
• 2010

CANDU형 격납건물에 대하여 극한내압하중에 대한 확률론적 취약도 평가를 수행하였다. 격납건물 성능의 불확실성은 가동중 검사 결과를 통해 얻어진 재료 물성치 중앙값과 텐던 긴장력 중앙값을 적용하여 고려하였다. 격납건물은 개구부를 고려하여 3차원 유한요소로 모델링하였으며, 확률론적 취약도 평가를 위하여 대규모의 비선형 유한요소해석 모델을 적용하기에 적합한 효율적인 취약도 평가기법을 개발하였다. 월성 1호기 격납건물에 대한 물성치를 사용하였다. 개발된 새로운 취약도 평가기법을 도입하여 각각의 파괴모드에 대한 취약도 평가를 수행하였으며, 파괴모드 별, 신뢰도 수준별 취약도 곡선을 도출하였다. 벽체 중단부가 극한내압발생으로 인한 방사능물질 누출에 가장 취약한 것으로 나타났다.

• 한국ITS학회 논문지
• /
• 제5권1호
• /
• pp.31-43
• /
• 2006

실시간 교통정보 수집과 센터 온라인 신호제어를 기본기능으로 하는 경찰청 교통신호제어기 표준규격서가 개발되어 2005년 3월부터 발효되었다. 발표된 규격은 가로구간의 교통상황을 수집하고, 이를 관제센터에 전송하며, 적절한 교통상황별 신호시간을 부여받아 신호등을 제어하는 지능적인 교통신호기의 표준 사양과 기능을 주요 골자로 하고 있다. 과거의 교통신호기들은 부품이 호환되지 않고 제어기능과 통신방법이 상이하여 도시별로 호환되지 않았으며 유지관리의 시간적 경제적 비용을 증가시켰다. 또한 모순검지방법 등 일부 교통안전에 중요한 기능이 비합리적으로 사용되고 있었다. 본 규격에서는 이런 단점을 극복하기 위해 먼저 하드웨어 호환성을 확보하였다. 그리고 모순검지방법을 보완하였으며, 관제센터와의 통신규약을 규격에 포함하여 모든 도시의 센터에 호환되도록 하였다. 개발된 규격은 시제품 제작과 시험과정을 거쳐 결정되었다. 본 규격으로 제조자에 비 의존적인 유지보수체계가 가능해지며 저렴하고 빠른 고장 대응이 가능하다. 또한 일관된 정보처리 및 제어알고리즘이 적용되어 센터설치 업체의 지역선점효과가 점차 사라질 것이며, 지역별 교차로의 교통통제방법이 일원화되어 표준적이고 안전한 교통제어를 할 수 있을 것으로 기대된다.

• 한국강구조학회 논문집
• /
• 제17권1호통권74호
• /
• pp.13-21
• /
• 2005

본 논문에서는 강아치교의 고등해석과 최적설계를 수행하였다. 고등해석은 해석시에 구조계와 그에 속한 부재의 강도와 안정을 직접 고려함으로서, 해석후 개별부재의 강도검토가 필요없는 설계방법을 지칭한다. 기하학적 비선형 효과를 고려하기 위하여 안정함수를 사용하였다. 잔류응력으로 인한 점진적인 소성화를 고려하기 위하여 CRC 접선 탄성계수를 사용하였다. 탄성강성에서 완전소성강성까지 점진적인 소성화를 나타내기 위하여 포물선 함수를 사용하였다. 최적화 기법으로는 수정된 단면점증법을 사용하였다. 수정된 단면점증법은 AASHTO-LRFD의 상관방정식으로 계산된 값중에서 최대값을 가지는 부재의 크기를 단계별로 증가시키는 방법이다. 목적함수는 구조물의 중량을 사용하였으며, 제약조건식은 구조시스템의 하중-저항능력 및 처짐 조건을 고려하였다. 제안된 방법에 의한 설계결과를 기존의 연구결과와 비교하였다.

• 물과 미래
• /
• 제10권2호
• /
• pp.91-100
• /
• 1977

This is an experimental study to raise higher efficiency of filteration than conve ntional filteration by increasing of filteration capacity for per unit area and by extending of filteration lasting time with biflow filter system which was improved from the conventional rapid sand filteration method in the process of water purification treatment. In order to raise more efficient function of filteration and giving consideration to the filter layer at upper and lower parts of the filter, the fine sand & an thracite were used as a filter medium. Although there is some difficulty than previous fine sand in procurement, it could confirm that such filter medium (fine sand & anthracite) was more effective in the field of load, lasting time and back wash, etc. In consideration of practical effect of filteration. The raw water which was used for this experimental study was not coagulated. As a result of this experiment, the filteration volume could increase more than 2 times than that of conventional method. Besides, much more advantages could be obtained for instance, the requirement of installation area was not much and installation cost could economize. On the other hand, the following results were found. The quality of filtered water became worse as time goes by and the turbidity of filtered water was more influenced by raw water turbidity than by rate of filteration. Lasting time of filteration on change of filteration rate in the filter layer reached 2 times in comparison with previous filter basin, and until loss gead reached to 1.0 meter and 1.5 meter, the following relate formulas between lasting time and rate of filteration were formed. ($T_{1.5}=181.96V^{-0.46},\;T_{1.0}=121.31V^{-0.46}$) Even though the lasting time can be shorten in case of the increase of the filteration rate, but the lasting time was prolonged more than 2 times than of previous method. With taking aim at contribution to the development of water treatment technique, we are planning to study continuously for the future study basing on the results in this papers.