• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.126-133
• /
• 2008

최근 고객중심으로의 시장변화는 자연히 주택공급업체로 하여금 품질의 경쟁시대를 맞이하도록 하였다. 이러한 품질경쟁시대에 부응하는 주택상품 기획을 위하여 단위세대 품질의 차별화 사례 및 대상 부위에 대한 유형분석 등을 실시하여 공동주택의 단위세대에 대한 품질의 차별화 유형 분류체계를 구축하였다. 건축적 요소인 평면요소와 인테리어요소는 공간위계를 기준으로 품질요소를 세분하여 분류체계를 구축하였고, 사용자 편익과 관련 있는 설비시스템부위는 친환경성, 안전성, 에너지절약효과, 편리성으로 구분하여 분류체계를 구축하였으며, 제품요소는 가구와 설치제품 및 편의품으로 구분하여 분류체계를 구축하였다. 향후 이 분류체계는 공동주택상품의 마케팅 전략수립단계에서의 제품 포지셔닝과 상품기획단계에서의 상품의 차별화요소 결정에도 유용하게 활용할 수 있을 것이다.

• 대한한의학원전학회지
• /
• 제22권4호
• /
• pp.29-32
• /
• 2009

We have explored the five-element pattern of "River Table(河圖)" in the "Naegyeong(內經)", and conclude that this pattern is one of the five-element patterns applied in the "Naegyeong". Based on this pattern, we can exactly understand the eum(陰) and yang(陽) range of five Jang-organs, why the spleen is the extreme eum, why the spleen is the isolated Jang, how the spleen governs four seasons, the ascending and descending of visceral gi(氣), as well as why it can be applied in clinic that the spleen and stomach are the pivot of the ascending and descending of visceral gi(氣).

• Smart Structures and Systems
• /
• 제4권2호
• /
• pp.171-182
• /
• 2008

In this paper, a methodology for the estimation of masonry elasticity and shear moduli is presented, for linear elasticity considerations. The methodology is based on the assumption that for a "periodic" masonry wall, which is formed by the repetition of a basic unit containing blocks and mortar, the mechanical characteristics of the unit are representative of the characteristics of the entire wall. For their calculation, the finite element analysis method is used. A micro-model with finite elements simulating separately the blocks and the mortar is developed. An equivalent finite element model, using an homogenous material is also developed and assuming equivalence of strains for the two models, the homogenous material properties are estimated. The efficiency of the method and its applicability limits are investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1163-1167
• /
• 2003

Effective properties of ceramic matrix plain woven textile composites were calculated using finite element analysis. The considered geometry is a unit cell of plain weave and the analysis was performed by commercial finite element program, ANSYS. The materials for analysis are 3 types for matrix, 1 type for fiber with various volume fraction. The result indicates that the effective properties of ceramic matrix composites can be controlled by the volume fraction. The result can be used for numerical analysis using ceramic matrix composites.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.32-39
• /
• 1997

The coiling station of ISP coil box is an equipment that winds a hot bar rolled at reduction unit into a coil without mandrel. In the coiling process, the roll gap of the bending unit is a significant one of several factors that influence bar coiling. To obtain a good bar-coil, the roll gap must be set appropriately according to the bar thickness. In this study, with 2-dimensional isothermal elastic-plastic finite element method, authors investigated influence of the change of the roll gap on the initial coiling shapes and the formed inner diameters of coils. Based on finite element analysis, authors proposed the appropriate roll gap according to the bar thickness to be able to wind a hot bar. The inner diameters of coils by results of analysis comparatively agreed with coling operation conducted in plant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1499-1504
• /
• 2007

Spot-welding is widely used to construct passenger car bodies in automotive industry. Occasionally severe spot-weld distortions in sub-assembly make further spot-weld difficult. In this paper, distortions for various spot-weld conditions are measured using coordinate measuring machine. Then, based on finite element solution for unit translation or unit rotation of nugget edge, equivalent loads for spot-weld distortions are determined. They can be used to predict the spot-weld distortion using finite element method.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.681-686
• /
• 2006

The current flat type side slip tester measures only the total side slip. Therefore, measurement techniques which can be used to determine the side slip for each alignment element were examined. Because the side slip related to the camber angle varies depending on the unit load per travel wheel while the side slip related to the toe angle does not on the unit per travel wheel, but depends only on the direction of the tire, the side slip for each alignment element can be determined separately.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.401-413
• /
• 2002

In this paper, we consider hyperstructures (H,.) defined on the set H = {e, a, b}. We study the hyperstructure of H when every element is one of a scalar unit, a unit or a weak scalar. On those conditions the $H_{\upsilon}$-quasigroups are classified. And we obtain the 15 minimal $H_{\upsilon}$-groups and 2 non-quasi $H_{\upsilon}$-semigroups For these we use the Mathematica 3.0 computer programs.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.52-57
• /
• 2003

In this paper, stability of ultra precision cutting unit is analyzed and this unit is the kernel unit in ultra precision processing machine. According to alteration of shape and material about hinge, stability investigation is performed Through this stability investigation, trial and error is reduced in design and manufacture, at the same time, we are accumulated foundation data for unit control.

• 대한수학회보
• /
• 제55권5호
• /
• pp.1389-1396
• /
• 2018

We observe the structure of a kind of unit-IFP ring that is constructed by Antoine, in relation with units and nilpotent elements. This article concerns the same argument in a more general situation, and study the structure of one-sided zero divisors in such rings. We also provide another kind of unit-IFP ring.