• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.217-228
• /
• 2009

Sections under the influence of merging in an uninterrupted facility create irregular interaction between vehicles, such as lane change, speed acceleration and deceleration because of the merging of ramp traffic flows which have traffic characteristics different from those of the main line. This causes a confused traffic flow phenomenon(turbulence), which is considered an unstable traffic characteristic between various continuous points in consideration of v conditions. In this study, in merge influence sections, detectors by lane-point were installed to create time and space-series -traffic data. The least significant difference(LSD), as the criteria for discriminating a significant speed change between points, was calculated to examine the turbulence. As a result, turbulence in merge influence section was found to change the zones of such occurrence and the seriousness levels according to traffic condition. Thus, the maximum merge influence section due to the turbulence was created in the traffic condition before congestion when traffic increases. According to characteristics of changes in speed, merge influence section was divided into upstream 100m$\sim$downstream 100m(a section of speed reduction), and downstream 100m$\sim$downstream 400m(a section of reduced speed maintenance and acceleration).

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.19-26
• /
• 2002

The purpose of this paper is to study the fundamental characteristics of bicycle flows. Several experiments were conducted to obtain the characteristics of bicycle flows, speed variation along a curve radius, bicycle driver's travelling territory and saturation flow rate at signalized intersection. Bicycle facilities are categorized into uninterrupted and interrupted, the capacity of uninterrupted is approximately 5000bic/h, and that of the interrupted (at signalized intersection) is approximately 3000bic/h, when a curve radius is over 20m, bicycle speed is not increasing. Bicycle driver's travelling territory is used to occupancy area, it is the same concept as pedestrian's. Bicycle occupancy area is to be divided into circulation zone, comfort zone. and collision zone. Circulation zone is over 2.21$\times$4.1m and collision zone is less than 0.96$\times$2.47m. Comfort zone is defined as intermediate state between two zones.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.145-154
• /
• 2006

In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.625-637
• /
• 2015

This study aims to calculate optimal travel speeds based on analysis of the AVI data collected in the uninterrupted traffic flow, and the results are as follows. Firstly, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. Secondly, there were differences among type 1(passenger automobiles) & type 2(automobiles for passengers and freight) and type 4(special automobiles) in the non-congestion section. thus it was revealed that there is a necessity to remove type 4(special automobiles) when calculating the sectional travel speeds. Thirdly, Based on the results of these, the optimal outlier removal procedures were applied to this study. As a result, it showed that the MAPE was between 0.3% and 2.0% and RMSE was between 0.3 and 2.3 which are very similar figures to the actual average traffic speed. Also, the minimum sample size was satisfied at the confidence level of 95%. The result of study is expected to serve as a useful basis for the local government to build the AVI. In the future, it will be necessary to study to integrate AVI data and other data for more accurate traffic information.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.29-37
• /
• 2010

Ramp metering control is the most representative strategy of uninterrupted flow control and management system. Ramp metering is to adjust vehicles entering an expressway in such a way that expressway mainline maintains flow stability by regulating ramp vehicles. The effect of two metering strategies, single-entry metering and platoon metering, on mainstream under the same metering rate with pre-timed metering are analyzed by micro-simulation. Platoon metering shows lower performance than single-entry metering under the same metering rate in terms of speed, density, and delay, causes earlier breakdown than single-entry metering. It indicates that the selection of metering type has critical importance as the flow of mainline is high.

• Journal of Intelligence and Information Systems
• /
• v.16 no.1
• /
• pp.57-69
• /
• 2010

The ubiquitous transportation system environments make it possible to collect each vehicle's position and velocity data and to perform more sophisticated traffic flow management at individual vehicle or platoon level through V2V and V2I communication. It is necessary to develop a new data processing methodology to take advantage of the ubiquitous transportation system environments. This paper proposed to build 3-dimension data profiles to maintain the detailed traffic flow information contained in the individual vehicles' data and at the same time to keep the profiles from the meaningless fluctuations. Also methods to build the platoon profile and the shock wave speed profile are proposed, which have not been possible under ITS(Intelligent Transportation System) environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.214-227
• /
• 2021

The purpose of this study is to find the driving difficulty of automated vehicles in terms of road infrastructure operation. It was judged out of this study that the level of automated driving would be enhanced if the road situation recognition ability was advanced through the presentation of infrastructure information during the difficult driving situations. The difficulty evaluation index was divided into three stages, and a survey of experts and an AHP were conducted. The result of the AHP showed that the driving difficulty of the interrupted flow was much higher than that of the uninterrupted flow. The AHP results also showed that and the driving difficulty of unsignalized intersections and roundabouts under an interrupted flow was evaluated as the highest. The top six driving situations with high difficulty were also evaluated to occur under unsignalized intersections and roundabouts.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.155-165
• /
• 2013

PURPOSES : Benefits for improvement of travel time reliability obtained from construction of new highways should be considered as a major factor in the feasibility study for highway constructions. The purpose of this study is to develop a method of estimation for the value of travel time reliability. METHODS : Highway type (urban/rural highway) and traffic flow type(interrupted/uninterrupted) was considered to estimate he value of travel time reliability. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when travel time reliability is improved. Finally the value of travel time reliability was estimated using the results of survey and logit model. The value of travel time reliability was estimated considering travel objectives, time constraint travel and non-time constraint travel. RESULTS: The value of travel time reliability of business trip is higher than that of non-business trip. The value of travel time reliability of time constraint travel is higher than that of non-time constraint travel. The value of travel time reliability in urban area is higher than that in rural area. CONCLUSIONS: It was concluded that the proposed method in this study is more realistic and proper to estimate the value of travel time reliability because it reflects the situations of time constraint travel and non-time constraint travel.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.147-153
• /
• 2017

PURPOSES : This research aims to estimate the occurrence of hydroplaning on roads based on the road alignment types and rainfall intensity in Seoul. METHODS : Three types of data were used for estimation of hydroplaning in this study. The Inner Circulation Road (12.5 km) to the Bukbu Expressway (7.4 km) in Seoul was selected as the test road and data was collected for road information using a probe-vehicle. Precipitation was observed from Automatic Weather System in Seoul. These data were interpolated by applying Inverse Distance Weighted Methodology for hydroplaning estimation. Finally, the water depth information of the roads was observed using an RCM411 device. RESULTS : This study demonstrated that the cross slope with small-angle-tilt or vertical section with large-angle-tilt are the primary factors causing hydroplaning on the roads. The flow velocity on steep slope is high; however, large drainage lengths result in hydroplaning on the roads. CONCLUSIONS : This result can contribute towards the reduction of car accidents on rainy days. Furthermore, information regarding hydroplaning can be delivered to drivers more rapidly and precisely in the future.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.45-60
• /
• 1997

본연구의 목적은 1994년과 1995년의 연구 결과를 토대로 고속국도 교통류의 차량 추종, 차선 변경 특성을 현장 조사 자료를 통하여 분석·규명하고, 국내 고속도로의 교통류 특성을 반영할 수 있는 한국형 고속국도 모의실험 모형을 개발하는데 있다. 본 연구의 주요 결과는 다음과 같다. ▶ 국내 고속국도 교통류의 차두시간, 속도, 차량군의 크기, 차선 변 경, 중차량의 영향 등의 특성을 조사·분석하여 관련 매개변수와 모형식을 도출하였다. ▶ 차량 생성 모형은 개별 차량의 차두시간, 속도를 이용하여 구축하였으며, 중차량의 구성 비 율에 따른 속도 변화를 연구하여 그 결과를 모형 구축에 응용하였다. ▶ 차량 추종 모형은 1995년 연구에서 검증된 PITT-KLD 모형에 기반을 두었으며, 현장 실측 자료를 분석하여 차량 추종과 관련된 매개변수들을 설정하였다. ▶ 차선 변경 모형은 기본적으로 간격 수락 모형을 이용하였으며, 차선 변경시 임계 간격을 국내 운전자들의 유형에 따라 10가지로 설 정하였다. 차선 변경 확률은 현장 조사 자료를 기초로 한 경험적 모형을 구축하여 선정하였 으며, 마코프 연쇄 기법과도 비교·검토하였다. ▶ 개발된 모의실험 모형을 비교·평가하기 위 해 고속국도 합류부의 현장 조사 자료와 모의실험 모형을 비교·평가한 결과, 합류 이전 단 계에서는 실측치와 모형의 통계량이 어느 정도 유사한 양상을 보이지만 합류 이후 단계에서 는 차이를 나타내고 잇다.