Treatment options for partially edentulous patients are fixed partial denture, removable partial denture and implant supported fixed partial denture. In case of a patient with a few remaining teeth, removable partial denture and implant supported fixed prosthesis are available. For implant fixed prothesis, enough implant fixtures are required and the patient's general condition, local factors and economic status must be considered. When the condition of the abutments and the residual ridge is favorable and the prosthesis is well designed, removable partial denture can be an option. In removable partial denture, the bilateral support is important. If the teeth remain unilateral, harmful stress is put on the abutments by the fulcrum line. In this situation, strategic implantation and implant-retained or assisted removable partial denture is beneficial to the retention and support of the denture. And this can be cost-effective, functional and esthetic choice of treatment. This article describes the prosthodontic rehabilitation of Maxillary Kennedy class I partially edentulous patients. In these two cases, the patients had a small number of teeth and they were restored by the combination of a removable partial denture and dental implants.
This study is that the manufacturer's sales policy power appeared on the source of local distributors through the sale willingness impact on research for coexistence between the manufacturer and dealer sales for developing policy. Dealers in terms of the sale of regional sales willingness says "manufacturers and retailers to connect to the regional distribution on the path to regional sales representative for manufacturers based on trust companies that supply products or products manufactured by local retailers for about a unilateral will sale whether the continued willingness and indicates the degree of business". This study topics are the results of this measure will sell a total of 24 entries are four factors. In variety sales policy of each power source, First, sales policy in Reward Power, compensatory power as the manager of promotion support, sales support and sales activities will significantly impact respectively. Second, sales policy of Coercive Power, reduction of credit limits act as an element of discontent and the sales will appear in the negative hypothesis of the influence was partially supported. Third, sales policy in Referent Power, the information trust, the most significantly impact of trade policy, respectively. Fourth, sales policy in Professional Power, delay time delivery of goods, sales of our product and sales knowledge will have a significantly effect appear to be related.
We obtained successful functional and esthetic results by grafting of iliac marrow-cancellous bone in 2 cases of alveolar-palatal cleft patients. Bone graft of alveolar-palatal clefts provide bony support to adjacent teeth of cleft area, prevented from relapse of orthodontic arch expansion, closure of oroantral fistula and improvement of speech problem. 1. In one case, extraction of upper right central incisor that was little bone support, alignment of rotated teeth and expansion of collapsed arch segment were done with pre-ortodontic treatment. The other case, Bone grafting was done after removal of prosthesis with no preorthodontic treatment. 2. After mucoperiosteal incision in cleft area. The mucosal flap of labial area, palate and nose were separation and the raised nasal mucosa was sutured for closure of oroantral fistula. Then, the iliac marrow-cancellous bones were grafted to cleft site. 3. After 6 months of operation, we had seen the new bone deposition to cleft site in dental radiography and prosthetic treatments of missing teeth were done.
Successful cases of the implant-assisted removable partial denture and implant overdentures are reported in which a few implants are additionally placed to secure the maintenance, support, and stability of the denture when there are a few residual teeth. When the lateral force applied to the tooth abutment and implant surveyed crown is minimized, the horizontal and rotational movement of the denture is significantly reduced which is an effective method that can improve the address in patients who complain of reduced retention and stability of their dentures. In this case, a small number of implants were placed to fabricate an implant-assisted removable partial denture with implant surveyed crown in the maxilla and implant overdenture with Locator® attachment in the mandible to improve the retention, stability, and support of the dentures. The patient was satisfied with both functional and aesthetic aspects after the final dentures were delivered.
Journal of Dental Rehabilitation and Applied Science
/
v.25
no.4
/
pp.375-390
/
2009
Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.
Park, Seung-Kyu;Shon, Mal-Hyun;Han, Dong-Gi;Ha, Hyun-Chul;Jin, Young-Ho;Song, Sun-Dae
Tuberculosis and Respiratory Diseases
/
v.42
no.4
/
pp.474-480
/
1995
Background: In spite of initial intensive and long-term chemotherapy for pulmonary tuberculosis, many problems remain in the treatment of the residual lesion. The role of surgical intervention for pulmonary tuberculosis is getting rid of such residual lesion of pulmonary tuberculosis to support the healing process and to induce bacteriologically negative conversion in the end. Method: We experienced 30 cases of pulmonary resection for pulmonary tuberculosis from Aug. 1994 through Apr. 1995 in National Masan Tuberculosis Hospital. We conducted retrospective study to analyze several variables for the cases. Results: 1) The ratio between male and female was 4:1(male 24, female 6) and the age of peak incidence was in 3rd and 4th decades. 2) Indications for pulmonary resection in the radiographic findings were cavitary lesions of 19 cases(63.3%), destroyed one side of 8 cases(26.7%) and destroyed one lobe of 3 cases(10%). 3) 16 of 20 cases with unilateral lesions and all of 10 cases with bilateral lesions on chest X-ray films showed AFB positive on preoperative sputum smears. 14 cases(87.5%) of unilateral lesions and 9 cases(90%) of bilateral ones were converted into AFB negative postoperatively. Negative conversion rates of pneumonectomy and lobectomy cases were 100% and 85.7%, respectively. 4) Preoperative combined disease was 3 cases(10%) of DM and postoperative complications were 2 cases(6.7%) of dead space and no death. Conclusion: Chemotherapy only has some limitation in treatment of all tuberculosis. So, surgical intervention for pulmonary tuberculosis is an effective method as partner of chemotherapy.
Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.
Journal of the korean academy of Pediatric Dentistry
/
v.26
no.2
/
pp.446-452
/
1999
Ectopic eruption of the first permanent molar means the first permanent molar assumes an atypical path of eruption resulting in premature atypical resorption of the second primary molar. If the reversible eruption does not occur, early loss of the second primary molars results in space loss, mesial tipping of the first permanent molar, impaction of the second premolar, buccal segment crowding and overeruption of opposing tooth. The main objectives of treatment are (1) to prevent loss of the second deciduous molars so it can continue to serve as a space maintainer and (2) to regain lost arch length, allowing the second premolar to erupt into normal position. The optimal treatment approach depends on a number of factors including the clinical eruption status of /6/, the change in position of /6/, the amount of enamel ledge of /E/ entrapping /6/, the mobility of /E/, and the presence of pain or infection. Unilateral appliance to correct the mesial angulation of ectopic permanent first molars, as in the majority of the appliance designs, would produce a resultant force that would further enhance the space loss. A bilateral support similar to the holding arch design is recommended to maximize the anchorage. These case reports present the successful result of preserving space for the second premolar in treatment of ectopic eruption of the first permanent molar using Halterman appliance with bilateral anchorage on patients visiting department of pediatric dentistry in Samsung Medical Center.
This study analyzed the globalization policy of ICT SMEs and ventures using cognitive map analysis and derived the priority to importance about action plans using AHP model, while the globalization paradigm has been rapidly changing in the ICT industry. Empirical results showed that policy tool variables should be needed to develop because policy goal variables are generally presented more than policy tool variables. In addition, this cognitive map could be characterized by a scarcity of feedback loops which means policy landscape for ICT SMEs and ventures' globalization is unilateral rather than cyclical to reach policy goal from policy tools. Another finding is that creative economy policy variable was not observed as policy tool variable but as policy goal variable. This means creative economy can be implemented through support for ICT SMEs and ventures' globalization. Finally, for detailed policy measures, installation of global start-up center, recruiting and utilization of global specialists, revitalization of ICT R&D international collaboration study, enlargement of global investment network, accompanied overseas advance of large enterprises and SMEs are presented in order in terms of the importance of policy priority.
Translational research (TR) as high quality research can accelerate collaboration strongly between biotechnology-based researchers and clinical-research experts for overcoming diseases. TR facilitates basic science translated to clinical efficacy and effectiveness from bench (basic science) to bedside (clinical practice) for the enhancement of human health. Disease-oriented TR programs were defined as unilateral, bilateral and multilateral TR in this patent performance analysis. Patent performance was measured in a R&D project on Health and Medical Technology to enhance the productivity of R&D investment on disease-oriented TR in Health Technology (HT). Patent Map (PM) analysis and Bibliometrics were conducted to collect information for the assessment of research patents of TR programs. Futhermore, PIAS (Patent Information Analysis System) and Thinklear programs were applied for quantitative and qualitative analysis successfully. These indicate that multi-dimensional analysis of patent performance for disease-oriented TR could promote the connection of R&D-IP (Research and Development-Intellectural Property) and R&BD (Research and Business Development) supporting system significantly.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.