• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.57-65
• /
• 2017

In a column experiment with low rank coal, rice straw was additionally supplied to induce methane gas generation by microorganisms in the state of supplying microorganisms and nutrients, and long-term biogas production characteristics were observed. When the weight ratio of the rice straw to coal was 0.04 or less, there was no significant gas generation. At 0.08, the biogas was generated for about 90 days. However, the methane gas generation was only 5% compared with the vial test result at optimum condition. Therefore, in order to produce biogas in the coal deposit in situ, a reactor that operates at COD concentration of 2000 mg/L or more at a ratio of 1:3 or more of rice straw to coal should be installed on the ground or under the ground. Liquid from the column filled with coal and rice straw and a liquid from vial containing rice straw were analyzed by microbial community analysis using pyrosequencing method, and compared the dominant microbial species among the two samples. In terms of the uniformity and diversity of the bacteria, the coal-filled column showed various species distribution, which has shown to be a disadvantageous microbial distribution to methane production.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.89-97
• /
• 2006

Purpose : To evaluate MR image qualities we developed a new MRI phantom with the fixation structures necessary to position it into coil firmly. Materials and methods : We designed MRI phantom for eight evaluation items such as slice thickness accuracy, high contrast spatial resolution, low contrast object detectability, geometry accuracy, slice position accuracy, image intensity uniformity, percent signal ghosting and signal to noise ratio. For the positioning of phantom at coils, the fixation structures were set up on the surface of phantom. Six different MRI units were used for test the possibility for the clinical application and their image qualities were evaluated. Results : We acquired appropriate MR image qualities enough for the evaluation on all used MR units and confirmed that their evaluations were within reliable values compared to real ones for some items. The positioning of our phantom into head coils with fixation structures worked well for proper imaging. Conclusion : We found that our prototype of MRI phantom had the possibility of clinical application for MR image quality assessment.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.439-449
• /
• 2017

The cause of yield reduction in a collector well, which is located in Anseong-cheon watershed in Kyunggi province, is studied by using aquifer sediments' composition and hydraulic conductivity near four horizontal wells, no. 1, no. 4, no. 6, and no. 7 wells. During test-pumping periods, groundwater yield is reduced with a trend of $12.4m^3/d/d$ at no. 1, $2.3m^3/d/d$ at no. 4, $24.4m^3/d/d$ at no. 6, and $187.3m^3/d/d$ at no. 7 and no. 7 well shows the biggest reduction. The sediments along no. 7 horizontal well have low hydraulic conductivity and high coefficient of uniformity ($C_u$), and a deviation of $C_u$ along the well is also large. This characteristics can bring the fine particles' movement and make the openings filled. Additionally, high iron ($Fe^{2+}$) content results in a precipitation of iron hydroxides during pumping or injection and they can produce a clogging in sediments. In the future study, the analysis of physical and hydrochemical changes through a long-term pumping procedure will give a more exact interpretation for the cause of yield reduction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.83-91
• /
• 1979

This study was conducted in order to find out the performance of rice transplanters in accordance with the change of the trans-planting days after pudding and the water depth flooding the paddy field at the time of transplanting : and thus to select the optimum paddy field preparation procedures for an efficient utilization of rice transplanters. The performance factors of the two different types of rice transplanters were measured during the first 6 consecutive days after puddling and with 3 different levels of water depth flooding the paddy fields. The results of this study were analysed and summarized as follows : 1. Wheel sinkage decreased very rapidly from 0 to 2 days after puddling and slowly from 3 to 5 days after puddling. 2. The depth of the test cone penetration decreased rapidly during the first few days after puddling. It was 17.8cm just after puddling, and decreased to 13.4cm one day after puddling. After 2 days, the rate of decrease was dampened, and after 5 days it kept constant value of 9.2cm. 3. Two days after puddling, the hill interval was 15.8cm (98.75% of the preset value) for broadcasted seedling rice transplanter with 3cm flooding depth : This value was the closest to the pre-adjusted value of 16cm. The general performance of broadcasted-seedling type rice transplanter was better than that of strip-seedling type rice transplanter. 4. Usually the working performance of a rice transplanter is evaluated with uniformity and adjustability of the hill intervals. The hill interval was the most uniform and closest to the pre-set value of 16cm when planted two days after puddling with 3cm of water depth. When it was inavoidable to plant 4 days after puddling with stripseedling type rice transplanter, it is advisable to let the water flooded somewhat deeper. 5. The percentage of missing hills including floating and burried seedlings was the highest just after puddling and ie decreased substancially until 3 days after puddling and then it increased again. Hence, the optimal time transplanting is to be between 2 and 3 days after puddling. 6. Better postures of planted seedlings were found when planter 2 days after puddling than 3 days after puddling. Six cm of flooding water depth always gave the best results with respect to the postures of planted seedlings. Broadcasted-seedling rice transplanter, in general, showed better posture of planted seedlings than did strip-seedling type rice transplanter. 7. Judging from the above results, the optimal conditions will be 3cm of flooding depth and transplanting between 2 and 3 days after puddling.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.329-335
• /
• 2010

Digital imaging detectors can use a variety of detection materials to convert X-ray radiation either to light or directly to electron charge. Many detectors such as amorphous silicon flat panels, CCDs, and CMOS photodiode arrays incorporate a scintillator screen to convert x-ray to light. The digital radiography systems based on semiconductor detectors, commonly referred to as flat panel detectors, are gaining popularity in the clinical & hospital. The X-ray detectors are described between a-Silicon based indirect type and a-Selenium based direct type. The DRS of detectors is used to convert the x-ray to electron hole pairs. Image processing is described by specific image features: Latitude compression, Contrast enhancement, Edge enhancement, Look up table, Noise suppression. The image features are tuned independently. The final enhancement result is a combination of all image features. The parameters are altered by using specific image features in the different several hospitals. The image in a radiological report consists of two image evaluation processes: Clinical image parameters and MTF is a descriptor of the spatial resolution of a digital imaging system. We used the edge test phantom and exposure procedure described in the IEC 61267 to obtain an edge spread function from which the MTF is calculated. We can compare image in the processing parameters to change between original and processed image data. The angle of the edge with respect to the axes of detector was varied in order to determine the MTF as a function of direction. Each MTF is integrated within the spatial resolution interval of 1.35-11.70 cycles/mm at the 50% MTF point. Each image enhancement parameters consists of edge, frequency, contrast, LUT, noise, sensitometry curve, threshold level, windows. The digital device is also shown to have good uniformity of MTF and image parameters across its modality. The measurements reported here represent a comprehensive evaluation of digital radiography system designed for use in the DRS. The results indicate that the parameter enables very good image quality in the digital radiography. Of course, the quality of image from a parameter is determined by other digital devices in addition to the proper clinical image.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.208-217
• /
• 2016

The Rural Development Administration moved to Jeonju for the balanced development of the land. This situation required establishment of new research fields with soils appropriate to cultivation. We applied a variety of amelioration techniques to mature soils of new research fields of the National Institute of Agricultural Science (NAS) and evaluated effects of the integrated amelioration techniques. The schedule of amelioration was following: 1) location of research fields was determined, 2) surface and subsoil samples were collected separately, 3) after aligning the top level of research fields, subsoil and surface soil were re-established with soil amendment, 4) the green manure crops were grown four seasons to improve the uniformity and increase the organic content of the research field, and 5) drainage canal and/or underdrainage were applied to poorly drained fields. The last green manure crop was rape in RDA fields and green barley in NAS fields. The average height, fresh weight, and dry matter weight of rape in good condition were 123 cm, $3,938kg\;10a^{-1}$, and $651kg\;10a^{-1}$, respectively. The height, fresh weight, and dry matter of green barley, on average, were 97 cm, $3,013kg\;10a^{-1}$, and $1,004kg\;10a^{-1}$, respectively. In the chemical properties of paddy field, pH and levels of silicate, calcium, magnesium, and potassium were in appropriate range but organic matter content of $16g\;kg^{-1}$ was less than the optimum level. In the chemical properties of upland field, pH and levels of phosphorus, calcium, magnesium, and potassium were appropriate range but organic matter content of $12g\;kg^{-1}$ was less than the optimum range. Evaluation of well-adapted soil was performed. The field in RDA was classified into the superior class with points ranging from 90 to 95 by the field evaluation test. The fields in NAS were mainly evaluated as the superior class with points greater than 85. However, some fields in NAS remained low quality with scores between 80 and 83. Further soil amelioration practices were suggested to fields with low soil quality.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.1-5
• /
• 2003

In this project, the efficiency of localized heating for micro systems packaging is developed by using a forced potential scheme microheater. Less than 0.2 Mpa contact pressure was used for bonding with a 200 mA current input for $50{\mu}m$ width, $2{\mu}m$ height and $8mm{\times}8mm$, $5mm{\times}5mm$, $3mm{\times}3mm$ sized phosphorus-doped poly-silicon microheater. The temperature can be raised at the bonding region to $800^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3 minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional microheaters. For performing the gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for conducting a gross leak check. The pass ratio of bonded dies was 67%, for conventional localized heating, and 85% for our newly developed FP scheme. The bonding strength was more than 25Mpa for FP scheme packaging, which shows that FP scheme can be a good candidate for micro-scale hermetic packaging.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.505-511
• /
• 1994

Seeds of Rigitaeda pine tree(Pinus rigida${\times}$P. taeda) was primed with polyethylene glycol(PEG-6000) under different PEG concentrations, treatment period, and temperatures to test uniformity of germination. Coated seeds and PEG treated seeds were sown to compare germination, emergence, establishment, and seedling growth. The results obtained are summarized as follows : 1. As the concentration of PEG increased, as total germination percentage of pine tree was increased. Total germination percentage of pine tree seeds primed with PEG at 15 or $20^{\circ}C$ was better than the seeds treated at $10^{\circ}C$ compared to untreated seeds. 2. Germination rate was improved as primed period long and level of PEG concentration high. 3. Maximum germination rate was high with long PEG treatment period, and markedly improved when the seeds were primed at $20^{\circ}C$ 4. Priming with PEG at $20^{\circ}C$ for 12 days reduced time taken for germination. 5. Osmoconditioned seeds accelerated germination under drought condition with injurious effect of coated seeds by some chemicals. 6. There were much differences in establishment and dry matter production between drill and oversowing method, and primed seeds showed better performances than the coated seeds. Coating effects to seeds were better under drought soil condition rather than moderate moisture condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.87-90
• /
• 1973

Optimum plot shape and size in a uniformity trial in the newly founded experimental farm of KAERI were determined for seed yield with the basic units consisted of 2.5m $\times$ 0.6m plot. Various plot sizes and shapes were made by combination of the basic units. Coefficients of variations for yield were 21% in local branch type variety Kumkang-Dairip and 20% in the introduced branchless type variety Clark. This result indicates that the field in the new experimental farm is appropriate for soybean yield trials when adequate number of replications are employed in the field experiment. In general, C. V. values were gradually decreased with increase of plot sizes. Although the data were not consistant, the errors for the long narrow plots tend to have somewhat smaller than for the square shape plots. A sharp decrease in C.V. value was found from the $4.5\textrm{m}^2$ plot in the variety Kumkang-Dairip and from the $6\textrm{m}^2$ plot in the variety Clark. These results imply that 5-$6\textrm{m}^2$ plot could be used for yield trials in early generations of hybrid progenies. 2.5-5m long plot with 3-4 replications will be practical for yield trials in the early hybrid generations. The C.V. values with 7.5m long plot was about 16% in both varieties and 15.3% in 10m plot. These results indicate that 7.5-10m plot with 3-4 replications could be employed in accurate yield test in the advanced generations.