• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• The Korean Journal of Emergency Medical Services
• /
• v.24 no.2
• /
• pp.89-97
• /
• 2020

Purpose: In this study we aimed to manufacture and evaluate an oral disintegrating film containing ibuprofen. Methods: Optimal oral ventilation was manufactured using ibuprofen 3g, polyvinyl alcohol #500 4.2g, HPMC K 100M 1.6g, glycerol 4g, TWEEN #20 0.3g, PEG #20 0.3g, citric acid 0.5g, sucralose 0.1g, ethamol 10mL, and distilled water 30mL. Results: Film mass ranged from 110 to 130mg in all prescriptions, showing general uniformity while the water content ranged from 6 to 12%. Measurement of ibuprofen content in all manufactured film solutions averaged 100.12% (98.0-102.0%). The elution test predicted the time taken from the body and the film agent of all prescriptions was released 100% within 5 minutes to confirm the rapid elution. Conclusion: Based on the results of all test, prescription E was proved to be the most suitable.

• Geomechanics and Engineering
• /
• v.11 no.5
• /
• pp.713-723
• /
• 2016

Shear wave velocities of three selected sandy soils subject to drained triaxial compression test were continuously measured using the bender elements. The shear wave velocity during isotropic compression, as widely recognized, increased as confining pressure increased and they were correlated well. However, during drained shearing, the mean effective stress could no further provide a suitable correlation. The shear wave velocity during this stage was almost constant with respect to the mean effective stress. The vertical stress was found to be more favorable at this stage (since confining stress was kept constant). When sample was attained its peak stress, the shear wave velocity reduced and deviated from the previously existed trend line. This was probably caused by the non-uniformity induced by the formation of shear band. Subsequently, void ratios computed based on external measurements could not provide reasonable fitting to the initial stage of post-peak shear wave velocity. At very large strain levels after shear band formation, the digital images revealed that sample may internally re-arrange itself to be in a more uniform loose stage. This final stage void ratio estimated based on the proposed correlation derived during pre-peak state was close to the value of the maximum void ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.34-40
• /
• 2004

Two different type scramjet models with side-wall compression and top-wall compression inlets have been tested in HPTF (Hypersonic Propulsion Test Facility) under the experimental conditions of Mach number 5.8, total temperature 1700K, total pressure 4.5㎫ and mass flow rate 3.5kg/s. The liquid kerosene was used as main fuel for the scramjets. In order to get fast ignition in the combustor, a small amount of hydrogen was used as a pilot. A strut with alternative tail was employed for increasing the compression ratio and for mixing enhancement in the side-wall compression case. Recessed cavities were used as a flameholder for combustion stability. The combustion efficiency was estimated by one dimensional theory. The uniformity of the facility nozzle flow was verified by a scanning pitot rake. The experimental results showed that the kerosene fuel was successfully ignited and stable combustion was achieved for both scramjet models. However the thrusts were still less than the model drags due to the low combustion efficiencies.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.95-98
• /
• 2010

A multi-injector rocket engine using high concentrated hydrogen peroxide and kerosene as the oxidizer and fuel was designed and fabricated. Six coaxial swirl injectors were mounted on the mixing head and flow analysis in the manifold was performed to minimize stagnation and recirculation zones. Finally, uniformity of mass flow rate and spray pattern was evaluated by cold flow tests and the mixing head design process was successfully verified the results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.869-874
• /
• 2004

This study was conducted to investigate the effects of paprika juice on the quality characteristics of Jeung-Pyun (fermented and steamed rice cake). Jeung-Pyun was prepared with four different levels of orange paprika juice (0%, 10%, 25% and 50% replacement of water). The proximate composition analysis showed that moisture contents of Jeung-Pyun were 48.72∼49.36%, and crude protein, lipid and ash contents were 2.94∼3.13%,0.46∼0.63% and 0.60∼0.65%, respectively. The pH of Jeung-Pyun batters was decreased from 4.74∼4.83 to 4.27∼4.38 during 4 hours of fermentation at 35$^{\circ}C$. The maximum expanded volume was observed in control group, followed by 10% group, 25% group and 50% group and the volume expansion was decreased with the increased amount of paprika juice. The "L" value (lightness) was the highest in control group and decreased with paprika juice addition, while the "b" value (yellowness) was increased as the amount of paprika juice was increased. Rheology test showed that there were no significant differences in hardness an cohesiveness among four groups. Springiness and gumminess were the lowest in control group and increased with the increased amount of paprika juice. Results of sensory evaluation showed that there were no significant differences in scores of cell uniformity, sweetness, moistness and overall desirability between control and 10% group. Therefore. Jeung-Pyun prepared with 10% paprika juice was evaluated as the most acceptable one among test groups when compared to control.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.396-405
• /
• 2002

An experimental study on counter-current flow limitation phenomena in narrow annular passages was carried out The gap sizes tested were 1, 2 and 3 mm. This is very small compared with the outer diameter of the annular passage, 500 mm. It was visually observed that a CCFL might occur in some part of the periphery while the other part is remained in a counter current flow pattern. That is, non-uniform behaviour of fluids due 4o a 2-dimensional effect appear in a large diameter facility. Because of this non-uniformity, a CCFL is defined in the present work as the situation where net water accumulation is sustained. That is, some amount of water should not be allowed to penetrate the gap and accumulate over the gap at CCFL criterion. The measured data are presented in the form of Wallis＇type correlation with characteristic length of gap size. It was found that the present correlation is in good agreement with other empirical correlation based on measurements whose test section diameter is close and the gap size is much larger than that of the present test section.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.275-284
• /
• 2022

Linear Shaped Charge(LSC) is widely used as a separation system in the field of weapon system. However, there are some disadvantages that are charging lots of explosives due to lack of uniformity and having difficulties of the design of liner and explosives because of manufacturing process. In order to solve these problems, Precision Linear Shaped Charge(PLSC) that can design a liner independently and charge explosives uniformly has been developed. In this study, PLSC was designed to have a proper liner shape and amount of explosives, and the penetration test of PLSC with different stand-off distance from liner to target was conducted. On the basis of the penetration test results of PLSC, the numerical analysis method using AUTODYN was established and verified. The penetrative mechanism and characteristics of PLSC with targets of different materials was analyzed from experimental and numerical results.

• Journal of Drive and Control
• /
• v.20 no.3
• /
• pp.25-34
• /
• 2023

In this study, we conducted a research on optimizing the spraying performance of agricultural drones and predicted the spraying performance in various flight conditions using the multi-layer perceptron (MLP). Data was collected using a test device for pesticide spraying performance according to the water sensitive paper (WSP) evaluation. MLP training involved supervised learning to achieve a coefficient of variation (CV), which indicates the degree of uniform spraying. The performance evaluation was conducted using R-squared (R²), the test samples showed an R² of 0.80. The results of this study showed that drone spraying performance can be predicted under various flight environments. In addition, the correlation analysis between flight conditions and predicted spraying performance will be useful for further research on optimizing the spraying performance of agricultural drones.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.633-638
• /
• 2010

The objective of this study was to assess the physicochemical characteristics of morning rolls containing various levels (0, 2, and 4%) of Makgeolli lees extract powder, which has nutritional and health effects. The results demonstrated that pH, moisture content, volume, weight, and baking loss rate of morning rolls were not significantly different among the groups. In the morning rolls with 4% Makgeolli lees extract powder, the Hunter's color 'a' (redness), but not L (lightness) or b (yellowness), was significantly higher than that in the other two groups. After estimating the texture quality of morning rolls, hardness, chewiness, and gumminess decreased significantly with added Makgeolli lees extract powder, but springiness was not significantly different. The results of the sensory test showed that appearance and texture increased as more Makgeolli lees extract powder was added, and that the overall acceptability score and air cell uniformity score for 2% and 4% Makgeolli lees extract powder morning rolls were significantly higher than those of controls. These results indicate that the texture and sensitivity of morning rolls can be increased by adding Makgeolli lees extract powder without affecting the overall quality.