• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.854-859
• /
• 2006

The density of coarse grained materials which is used in rock-fill dam or the piling the ground are used as $1.85\sim2.10g/cm^3$. Hereupon, the effect of variation of density on shear strength of ones was analyzed from the results of large scale shear test. The sample for the test was obtained from the local quarry sites. The test conditions are that density(1.85 versus $2.10g/cm^3$), material size range$(76.3\sim2.0\;mm)$, water content(air dry condition) and uniformity coefficient(5.0) Test result shows that the shear strength of $2.10g/cm^3$ is relatively larger than that of $1.85g/cm^3$.

• 대한방사선기술학회지:방사선기술과학
• /
• 제31권1호
• /
• pp.55-60
• /
• 2008

목적: 판독용 모니터의 성능을 평가하는데 있어 불필요한 시간 및 인력 등을 줄이고 판독의 최적화 유지와 모니터의 upgrade 시기, 그리고 교체 시기를 결정할 수 있는 시스템을 구축하는데 필요한 적절한 수준의, 일정기간의 성능평가 관리 주기 및 calibration 주기를 결정하고자 하였다. 대상 및 방법: 판독용 LCD 컬러 모니터(CCL350i, Totoku, Japan) 20대를 대상으로 2007년 3월부터 8월(첫 calibration 후 3, 4, 5, 6, 7, 8개월째)까지 매달 1회에 걸쳐 한 달 주기로 총 6회의 성능 평가를 하였다. 성능 평가에 사용된 측정 도구는 휘도계(DTP 94 39630, X-Rite Inc. U.S.A.)와 조도계(LX-101 Q031871, Lutron, U.S.A.) 그리고 모니터 성능관리 프로그램인 AAPM TG 18 protocol를 이용하였다. 성능평가 항목은 기하학적 왜곡(geometric distortion), 반사 테스트(reflection test), 휘도 반응 평가(luminance response evaluation), 휘도 균일도(luminance uniformity), 분해능(resolution), 노이즈(noise), 베이링 그레어(veiling glare), 색도(chromaticity) 등 8개 항목을 포함하였다. 결과: 기하학적 왜곡 평가와 반사 테스트, 휘도 균일도 테스트, 분해능, 노이즈 평가, 베이링 그레어 테스트, 색도 테스트 등은 AAPM TG 18에서 권고하는 기준치에 모두 부합되었다. 휘도반응평가 중 예측되는 최대 휘도와 관측되는 휘도의 편차 항목에서 4개월째부터 25%(4대)의 모니터가 8개월째까지 기준 편차를 벗어나기 시작하였으며, 8개월째에는 다른 모니터 7대에서도 편차를 보이기 시작하여 전체적으로 55%(11대)의 모니터에서 기준 편차를 벗어나고 있었다. 또한 대조도 반응의 편차 항목에서 4개월째부터 예측되는 최대 휘도와 관측되는 휘도의 편차의 기준치를 벗어나기 시작한 4대의 모니터 중 5%(1대)에서 4개월째부터 8개월째까지, 또다른 2대는 8개월째부터 편차를 보여 전체적으로 8개월째에는 15%(3대)의 모니터에서 기준 편차를 벗어났다. 결론: 성능평가의 주기는 calibration 후 4개월째부터 오차 범위를 벗어나는 결과와 모니터 수 그리고 성능 검사에 소요되는 인력 및 시간을 고려할 때 3개월에 한번씩 평가함이 효율적이라고 판단된다. 또한 calibration 주기는 8개월째부터 50% 이상에서 편차를 보인 결과 및 성능평가 주기를 고려할 때 calibration 후 6개월을 주기로 calibration을 다시 시행하여야 할 것으로 판단된다.

• 한국산림과학회지
• /
• 제84권2호
• /
• pp.166-177
• /
• 1995

본 연구의 내용은 임도건설(林道建設) 예정지역(豫定地域)의 흙을 어떻게 토질(土質) 역학적(力學的)으로 실험하여 실제적으로 응용할 수 있는가를 다루는 것이다. 이를 위해 8개 플롯에서 각 플롯 당 2 개씩 총 16개의 토양시료(土壤試料)를 채취하였다. 실험내용은 흙이 흩어지기 전후의 단위중량(單位重量), 함수량(含水量), 액성(液性) 및 소성한계(塑性限界), 다짐도 시험(試驗), 입도시험(粒度試驗) 등이다. 흩어지기(교란(攪亂)) 전후의 전체 단위중량(${\rho}_t$)은 각각 $1.69g/cm^3$과 $1.19g/cm^3$이었으며, 함수량(含水量)은 21.0%와 20.5%였다. 체분석과 비중계(比重計)에 의한 입도시험결과 얻은 균등계수(均等係數) U와 곡율계수(曲率係數) C는 각각 125와 0.42를 보이고 있어 전체적으로 좋은 입도분포는 아니었다. USCS에 의한 토양분류는 SM(실트질 모래 내지 모래실트 혼합토)으로서 성토재료(盛土材料)로서는 좋지 않은 것으로 보인다. 다짐시험결과 자연상태의 단위중량(${\rho}$)과 최적(最適) 단위중량(單位重量)(${\rho}pr$)은 각각 $1.40{\pm}0.065g/cm^3$과 $1.88{\pm}0.049g/cm^3$로 나타났는데, 이것은 ${\rho}pr$에 도달하기 위해 성토시(盛土時) 더 많은 다짐작업과 토량(土量)이 필요함을 의미한다.

• 한국동물위생학회지
• /
• 제30권2호
• /
• pp.243-249
• /
• 2007

The tube agglutination test has been used for bovine brucellosis diagnosis in Korea since middle 1950s. The reported high specificity was its value in eradication program. However, the reading of reaction mostly depends on personal experience, thus here we report a way to improve accuracy and uniformity of reading. The tube agglutination was conducted according to the protocol provided by Korean Ministry of Agriculture and Forestry. The intensity of reaction was measured by spectrophotometer. The relationship between turbidity and percentage clearing was generally in direct proportion and linear. The correspondent percent transmittance at 75, 50, and 25% clearing were 91, 82, and 73, respectively. Then, the degree of percentage of clearing at given international unit was measured. With about 1.5 unit of serum, the maximum percentage clearing was observed. The international unit showing 25, 50, and 75 percentage clearing were 0.61, 0.83 and 1.35, respectively. Based on the information obtained using international standard serum, the calculation of international unit of test serum was available. According to the protocol for bovine brucellosis diagnosis which provided by Korean Ministry of Agriculture and Forestry, the available range of detectable international unit was between 15 and 538. And the corresponding international units for suspicious case ranged between 42 and 127. Of the 35 sera from B abortus infected cattle, about half of them had more than 538 international units. Collectively, the reading of turbidity using spectrophotometer and application to international unit improved accuracy and uniformity of reading.

• 산업기술연구
• /
• 제22권A호
• /
• pp.229-240
• /
• 2002

This paper is an experimental and numerical work of Investigating the bearing capacity of shallow foundation of rubble mound under eccentric loads. Parametric centrifuge model tests at the 50g level environments with the model footings in the form of strip footing were performed by changing the loading location of model footing, relative density and materials for ground foundation. For the model ground, crushed rock sampled from a rocky mountain was prepared with a grain size distribution of having an identical coefficient of uniformity to the field condition. Model ground was also prepared with relative densities of 50 % and 80 %. For loading condition, model tests with and without eccentric load were carned out to investigate the effect of eccentric loads and a numerical analysis with the commertially available software of FLAC was performed. For numerical estimation with FLAC, the hyperbolic model of a nonlinear elastic constitutive relationship was used to simulate the stress-stram constitutive relationship of model ground and a series of triaxial compression test were carried out to find the parameters for this model Test results were analyzed and compared with Meyerhof method (1963), effective area method based on the limit equilibrium method, and a numerical analysis with FLAC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2039-2040
• /
• 2006

Persistent current switch (PCS) system in NMR, MRI, MAGLEV and SMES has many advantages, such as uniformity and durability of magnetic field and reducing a thermal loss, which enable many superconducting application to operate effectively. This paper deals with fabrication and test of heater trigger persistent current switch using coated conductor (CC) which has high n-index, critical current independency from external magnetic field and adaptable selectivity of stabilizer. PCS system consists of magnet power supply for energizing current to a magnet, heater, switch and magnet using coated conductor tape. Finite element method (FEM) is used to simulate thermal quench (switching) characteristic and design heater trigger. With FEM simulation, optimal length of heater is calculated by temperature and time analysis. Fabrication of PCS system and test of heater trigger characteristic were performed and compared with simulation result. This paper would be the foundation of researches of superconducting switching application.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.1-7
• /
• 2014

The microgrid system is the combination of photovoltaic(PV) array, load, and battery energy storage system. The control strategies were defined as multi-modes of operation, including rest operation without use of battery, power charging, and power discharging, which enables grid connected mode or islanded mode. Photovoltaic power is a problem of the uniformity of power quality because the power generated from solar light is very sensitive to variation of insolation and duration of sunshine. As a solution to the above problem, energy storage system(ESS) is considered generally. There fore, in this study, we did basic research activities about optimization method of the amount of energy used, using a smart microgrid test-bed constructed in building. First, we analyzed the daily, monthly and period energy pattern amount of power energy used, and analyzed PV power generation level which is built on the roof. Utilizing building energy pattern analysis data, we was studied an efficient method of employing the ESS about building power consumption pattern and PV generation.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.603-609
• /
• 2013

In this paper, we describe the analysis of inkjet-printed silver (Ag) patterns on epoxy-coated substrates according to several reliability evaluation test method guidelines for conventional printed circuit boards (PCB). To prepare patterns for the reliability analysis, various regular test patterns were created by Ag inkjet printing on flame retardant 4 (FR4) and polyimide (PI) substrates coated with epoxy for each test method. We coated the substrates with an epoxy primer layer to control the surface energy during printing of the patterns. The contact angle of the ink to the coated epoxy primer was $69^{\circ}$, and its surface energy was 18.6 $mJ/m^2$. Also, the substrate temperature was set at $70^{\circ}C$. We were able to obtain continuous line patterns by inkjet printing with a droplet spacing of $60{\mu}m$. The reliability evaluation tests included the dielectric withstanding voltage, adhesive strength, thermal shock, pressure cooker, bending, uniformity of line-width and spacing, and high-frequency transmission loss tests.

• 한국해양공학회지
• /
• 제35권6호
• /
• pp.446-456
• /
• 2021

To build an environment facility of a large-scale ocean basin, various detailed reviews are required, but it is difficult to find data that introduces the related research or construction processes on the environment facility. The current generator facility for offshore structure safety evaluation tests should be implemented by rotating the water of the basin. However, when the water in the large basin rotates, relatively large flow irregularities may occur and the uniformity may not be adequate. In this paper, design and review were conducted to satisfy the performance goals of the DOEB through computational numerical analysis on the shape of the waterway and the flow straightening devices to form the current in the large tank. Based on this, the head loss, which decreases the flow rate when the large tank water rotates through the water channel, was estimated and used as the pump capacity (impeller) design data. The impeller of the DOEB current generator was designed through computational numerical analysis (CFD) based on the lift surface theory from the axial-type impeller shape for satisfying the head loss of the waterway and maximum current velocity. In order to confirm the performance of the designed impeller system, the flow rate and flow velocity performance were checked through factory test operation. And, after installing DOEB, the current flow rate and velocity performance were reviewed compare with the original design target values. Finally, by measuring the current velocity of the test area in DOEB formed through the current generator, the spatial current distribution characteristics in the test area were analyzed. Through the analysis of the current distribution characteristics of the DOEB test area, it was confirmed that the realization of the maximum current velocity and the average flow velocity distribution, the main performance goals in the waterway design process, were satisfied.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3626-3632
• /
• 2010

반도체 소자 검사장비 핸들러는 주 검사장비인 테스터에 반도체 소자를 개별 또는 그룹으로 이송하여 테스트 환경을 만들어주고 검사가 끝나면 검사결과를 테스터로부터 전송받아 양품과 불량품으로 분류해주는 장비이다. 본 논문에서는 기존에 개발된 핸들러의 챔버 내부 온도 분포의 균일성을 개선하기 위하여, 챔버 덕트의 조절셔터 설치, Heater와 Match Plate 중심위치의 정렬, Match Plate Base의 Hole 크기 및 형상 변경, 온도 센서로 향하는 공기의 흐름이 원활할 수 있도록 핀에 직경 2 mm의 구멍 설치 등의 설계 변경을 하였다. 설계 변경의 효과를 확인하기 위하여, 기존 장비와 설계 개선된 장비 내부의 온도 분포를 32개의 온도 센서를 사용하여 측정하였다. 그 결과 기존 챔버내부 온도 분포는 $87.1{\sim}91.5^{\circ}C$ ($90{\pm}2.9^{\circ}C$)이었으나 개선된 챔버 내부 온도 분포는 $89.5{\sim}90.8^{\circ}C$ ($90{\pm}0.8^{\circ}C$)으로 15분 이상 지속 가능하여 챔버 내부의 온도 분포 균일성이 크게 개선되었음을 알 수 있었다. 또한 설계 변경 이후의 온도 분포는 $90{\pm}1^{\circ}C$의 범위 내에서 10분 이상을 유지하는 목표를 달성하였음을 확인하였다.