• 한국표면공학회지
• /
• 제55권5호
• /
• pp.273-283
• /
• 2022

Al6061 aluminum alloy specimens were exposed to atmospheric conditions for maximum 24 months. 24-month exposure specimen showed some more frequent and larger size of corrosion products and pitting on the surface compared with the 12-month exposure specimens. The XRD examination revealed the dominant surface oxide phases of Al₂O₃ and Al(OH)₃. The oxide thickness at uniform oxidation (or non-pitting) region was not much changed over exposure time. The 1.2 ㎛ deep oxygen penetration area was found in the 12-months exposed specimen near the thin uniform aluminum oxide film. The line-EDS was conducted through the penetration regions and non-penetrated grain boundary. There were signs of O and Si concentration through the penetration region, whereas non-penetration region showed no concentration of O or Si. It was confirmed that pitting is a more severe degradation mode in Al6061 (max. >4 ㎛ deep) compared with the uniform oxidation (max. ~200 nm deep) up to 24-months exposure.

• 태양에너지
• /
• 제20권1호
• /
• pp.97-108
• /
• 2000

The purpose of this study is to minimize the heat transfer surface area and cold fluid exit temperature of heat exchanger which applied to the refrigeration and air-conditioning system by utilizing the thermoelectric principle. Both uniform and non-uniform current distribution methods which applied to the analysis of the TE elements that incorporates heat exchanger were investigated. The non-uniform current distribution method had the better coefficient of performance and had the lower cold fluid exit temperature of the TE cooling system than the uniform current distribution method. It was found that if a TE cooling system incorporates a heat exchanger, a non-uniform current distribution should guarantee to the lowest cold fluid exit temperature. Also, the hybrid method (combination of the uniform and non-uniform current distribution method) is investigated to achieve the best results by combining the uniform and non-uniform current distributions. The results show that it can lower the cold fluid exit temperature and reduce the heat transfer surface area for the parallel flow arrangement if we apply the constant current in some entry region and the non-uniform increasing current in the direction of the cold fluid flow afterwards.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.681-691
• /
• 2008

Taking into consideration both the inconveniences reported with current working uniform for the aircraft mechanics and the subjects' requirements mentioned in preceded survey, the researchers designed an ergonomic sample garments with improved motional flexibility and comfort. To improve motional flexibility, extra folds were added to the back of the garments to allow for ease of motion of limbs, so that the material would not be drawn up by the motion of the arms. Darts were added to the elbow, hip, the knee. Furthermore, by increasing the length of the waist centerline, the hip region would not be drawn up. For improved comfort, $CoolMax^{(R)}$ was used as lining material for the armpit and back region to discharge swear promptly. Subjects and panels were asked to evaluate the sample garment that followed an ergonomic design and pattern. According to the results, the sample garment was evaluated more highly than the existing working uniform in appearance and motional flexibility. The field tests by three aircraft mechanics working in the Office of Forestry were also demonstrated that the sample garment was advanced in terms of motional flexibility and comfort.

• 디지털산업정보학회논문지
• /
• 제15권3호
• /
• pp.89-100
• /
• 2019

Uniform and integrated college desks and chairs have low efficiency of loading for transportation and delivery and low efficiency of storage for warehousing due to their simple uniform physical properties, thus increasing logistics costs for companies and decreasing their competitiveness. In an effort to overcome the limitations of previous studies, this study analyzed the stages of logistics for desks and chairs in college lecture rooms via the transportation route including the factory warehouses and local warehouses and via the delivery route from local warehouses by the region to the orderers including college lecture rooms. The study developed a model for the rationalization of corporate logistics by making a variable folding desk and chair capable of distance adjustment according to height to replace the uniform and integrated college desks and chairs in lecture rooms. A model was developed between the old uniform and integrated college desks and chairs and the new variable folding desks and chairs for three scenarios of cost development including product storage costs, transportation costs from the specialized factory warehouses to the local warehouses by the region, and delivery costs from the local warehouses to college lecture rooms as the orderer. For the generalization of the model, it was applied to each of the 90%, 95%, and 99% service levels.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.41-47
• /
• 2003

In this paper, a tetrahedral mesh generation algorithm which uses a grid based method for interior region and an advancing front method for outer surface region is proposed. In order to apply an advancing front method for outer region of an object, a new operator so called a hole operator has been developed to handle multiple shells. With this grid based approach in the interior region, more stable and uniform meshes can be constructed especially in the interior region.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.111-119
• /
• 1992

In this paper, we propose an edge detection scheme for noisy images based on the co-occurrence matrix. In the proposed scheme based on the step edge model, the gray level information is simply converted into a bit-map, i.e., the uniform and boundary regions of an image are transformed into a binary pattern by using the local mean. In this binary bit-map pattern, 0 and 1 densely distributed near the boundary region while they are randomly distributed in the uniform region. To detect the boundary region, the co-occurrence matrix on the bit-map is introduced. The effectiveness of the proposed scheme is shown via a quantitative performance comparison to the conventional edge detection methods and the simulation results for noisy images are also presented.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.87-92
• /
• 1998

확장된 새로운 층 방법을 이용하여 사다리꼴과 삼각형 형태의 회절격자 구조를 가지는 5층의 DFB 구조 소자의 TM 모드의 결합계수를 계산하였다. TM 모드의 unperturbed 필드 분포를 쉽게 계산하기 위하여 회절격자 영역의 비유전상수의 역수를 종축과 횡축 양 방향으로 평균값을 취하여 새로이 설정하는 층의 비유전상수의 역수가 되도록 설정하였다. 확장된 새로운 층 방법이 TM 모드의 결합계수 계산에도 유용하게 사용될 수 있음을 회절격자 영역의 등분할 층수를 6층까지 늘려가며 self-consistent하게 검증하였다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.260-269
• /
• 2000

Oil-film flow visualizations and three-dimensional flow measurements have been conducted in the downstream region of a butterfly-type valve used in air-conditioning systems, with the variation of a disk open angle. The flow visualizations in the flow symmetry plane show that there are a pair of counter-rotating separation/recirculation zones as wall as two jet-like near-wall flows. These flow disturbances are strongly depends on the disk open angle. Based on the flow visualization, a qualitative flow model is suggested in the near-field and downstream region of the valve disk. For a small disk open angle, the mean velocities and turbulent intensities have relatively small values in the near-field of the valve disk, but they do not show uniform distributions even in some downstream region. With an increment of the disk open angle, mean velocity variations and turbulent intensities are greatly increased in the immediate downstream region, but uniform distributions are quickly resumed as departing from the valve disk. The mass flow rate remains nearly constant for the disk open angles less than 30 degrees, meanwhile it strongly depends on the disk open angles between 45 and 75 degrees. The pressure loss is found to be about zero for the disk open angles less than 45 degrees, but is substantially increased for those larger than 75 degrees.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.313-318
• /
• 2006

An automatic sample centering system is underway at the protein crystallography beam line of the Pohang Light Source to improve the efficiency of the crystal screening process. A sample pin which contains a protein crystal is mounted on a goniometer head. Then the crystal should be moved to the center of X-ray beam by controlling the motorized goniometer to obtain diffraction data. Since the X-ray beam is located at the center of the image obtained from the CCD camera when the image of the sample pin is in focus, an auto-focusing algorithm is a very important part in the auto-sample-centering system. However the results of applying several well-known auto focusing algorithms directly to the images are not satisfactory owing to the following factors: misalignment of CCD camera, non-uniform cryo-stream in the background of the image and the supporter of the loop. The performance of an auto-focusing algorithm can be increased if the algorithm is applied to only the loop region identified. Non-uniform cryo-stream and a various illumination condition and a stain, which is shown in the image, are main obstacles to loop region identification. In this paper, a simple loop region identification algorithm, which can solve these problems, is proposed and the effective ness of the proposed scheme is shown by applying the auto-focusing algorithm to the loop region identified.

• 한국정보전자통신기술학회논문지
• /
• 제4권4호
• /
• pp.225-230
• /
• 2011

본 논문에서는 깊이정보에 기반한 watershed와 영역병합 알고리즘을 이용한 얼굴영역 분할 방법을 제안하였다. 얼굴영역 검출은 영역 분할 단계, 초기 화소 영역 검출 단계, 영역 병합의 세 단계로 구성된다. 입력된 컬러 영상은 제안된 알고리즘에 의해 균일한 작은 영역들로 분할된다. 색도정보와 에지 구속 조건을 사용하여 균일한 영역들을 결합함으로써 얼굴영역을 검출한다. 제안한 알고리즘은 색도정보나 에지정보만을 사용하는 기존 방법에서의 문제점을 해결하였다. 제안한 알고리즘의 성능을 평가하기 위해 컴퓨터 시뮬레이션을 하였으며 정확한 얼굴 영역을 분할할 수 있었다.