• ETRI Journal
• /
• v.37 no.1
• /
• pp.107-117
• /
• 2015

This paper presents an energy-efficient (low power) prime-field hyperelliptic curve cryptography (HECC) processor with uniform power draw. The HECC processor performs divisor scalar multiplication on the Jacobian of genus 2 hyperelliptic curves defined over prime fields for arbitrary field and curve parameters. It supports the most frequent case of divisor doubling and addition. The optimized implementation, which is synthesized in a $0.13{\mu}m$ standard CMOS technology, performs an 81-bit divisor multiplication in 503 ms consuming only $6.55{\mu}J$ of energy (average power consumption is $12.76{\mu}W$). In addition, we present a technique to make the power consumption of the HECC processor more uniform and lower the peaks of its power consumption.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.15-21
• /
• 2011

Cooperative diversity system can be applied to an ad-hoc network for reduction of the power consumption, for expansion of the communication range, and for improving the system performance. In a selection relay cooperative diversity system which selects the maximal SNR(Signal-to-noise ratio) relay for transmitting the source information, the selected strong relay transmits continuously under slow fading channel, consequently it reduces the network lifetime. To overcome this defect, recently the uniform power relay selection has been studied to expand the network life time. We apply the uniform power relay selection to a DOT(Double opportunistic transmit) cooperative system that select the transmit relays, of which the SNR of the transmit relays exceed both of the source-relay and the relay-destination threshold. And the performance of the system is analytically derived. The performance comparisons are made among SC(Selection combining), MRC(Maximal ratio combining), and uniform power relay selection of the cooperative diversity system. We noticed that the performance of the uniform power relay selection is inferior to that of others. It is interpreted that the uniform transmit opportunity to the selected relays for extension of the network lifetime degrades the performance.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.203-213
• /
• 2017

Magnetically suspended control & sensitive gyroscope (MSCSG) is a novel type of gyroscope with the integration of attitude control and attitude angular measurement. To improve the precision and reduce the power consumption of Lorentz Force-type Magnetic Bearing (LFMB), the air gap flux density distribution of LFMB has been studied. The uniformity of air gap flux density is defined to qualify the uniform degree of the air gap flux density distribution. Considering the consumption, the average value of flux density is defined as well. Some optimal designs and analyses of LFMB are carried out by finite element simulation. The strength of the permanent magnet is taken into consideration during the machining process. To verify the design and simulation, a high-precision instrument is employed to measure the 3-dimensional magnetic flux density of LFMB. After measurement and calculation, the uniform degree of magnetic flux density distribution reaches 0.978 and the average value of the flux density is 0.482T. Experimental results show that the optimal design is effective and some useful advice can be obtained for further research.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.33-35
• /
• 1993

A new low-power, high-order optimization scheme to design surface gradient coils (SGC) is proposed for magnetic resonance imaging (MRI). Although previous SGCs have been designed and constructed just to get strong linear gradients, this paper proposes more systematic ways of SGC design by minimizing electrical power consumption in the gradient coil and by removing unnecessary high-order field distortions in the imaging region. By assuming continuous current flow on the coil surface which may be or may not be planar, power consumption in the coil is minimized. According to the simulation results, the SGC designed by using the proposed scheme seems to produce much more uniform linear gradient field using less electrical power compared to the previously proposed SGCs.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.688-698
• /
• 2016

In this paper, we investigate the achievable sum rate and energy efficiency of downlink massive multiple-input multiple-output antenna systems with zero-forcing precoding, by taking into account the randomness of user locations. Specifically, we propose two types of non-uniform user distributions, namely, center-intensive user distribution and edge-intensive user distribution. Based on these user distributions, we derive novel tight lower and upper bounds on the average sum rate. In addition, the impact of user distributions on the optimal number of users maximizing the sum rate is characterized. Moreover, by adopting a realistic power consumption model which accounts for the transmit power, circuit power and signal processing power, the energy efficiency of the system is studied. In particular, closed-form solutions for the key system parameters, such as the number of antennas and the optimal transmit signal-to-noise ratio maximizing the energy efficiency, are obtained. The findings of the paper suggest that user distribution has a significant impact on the system performance: for instance, the highest average sum rate is achieved with the center-intensive user distribution, while the lowest average sum rate is obtained with the edge-intensive user distribution. Also, more users can be served with the center-intensive user distribution.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.326-332
• /
• 2017

A switched VCO-based UWB transmitter for 3-5 GHz is implemented using $0.18{\mu}m$ CMOS technology. Using RF switch and timing control of DPGs, the uniform RF power and low power consumption are possible regardless of carrier frequency. And gate control of RF switch enables the undesired side lobe rejection sufficiently. The measured pulse width is tunable from 0.5 to 2 ns. The measured energy efficiency per pulse is 4.08% and the power consumption is 0.6 mW at 10 Mbps without the buffer amplifier.

• Journal of Korea Multimedia Society
• /
• v.22 no.8
• /
• pp.860-873
• /
• 2019

LCD backlight boosting and the integration of boosting and dimming are proposed based on image analysis to maximize perceptual image qualities and to reduce display system power. Based on the histogram of the image data, methods for selecting an image suitable for boosting and for adjusting the optimum backlight brightness are proposed. A comprehensive combined optimization method of LCD backlight boosting, dimming and bypass based on image characteristics is also described. Perceptual image quality enhancement and power consumption are evaluated based on well known image databases. Average subjective image quality is improved by 24.8%, RMS contrast is improved more than 20%, and average power consumption is reduced by 15.94% compared to conventional uniform boosting.

• Journal of Plant Biotechnology
• /
• v.41 no.3
• /
• pp.123-126
• /
• 2014

This paper is suitable for household plant factory by design and using both energy-saving LED and solar technology. Conventional household plant factory only depending on natural sunlight is sensitive for the change of external environment. Another a big problem of conventional common household plant factory is large power consumption. Recently interest in wellbeing food such as chemical-free is increased abruptly. To solve these two problems, this paper describes hybrid type of household plant. In particular, reducing the power photosynthesis photon flux density (PPFD) is kept uniform to enhance the growth of the plant. Ambient light sensor is adopted for the control of proper combination of sunlight and LED to keep PPFD constant.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.885-902
• /
• 2022

The mmWave cell-free massive MIMO (CFmMIMO), combining the advantages of wide bandwidth in the mmWave frequency band and the high- and uniform-spectral efficiency of CFmMIMO, has recently emerged as one of the enabling technologies for 6G. In this paper, we propose a novel framework for energy-efficient mmWave CFmMIMO systems that uses low-resolution digital-analog converters (DACs) and phase shifters (PSs) to introduce lowcomplexity hybrid precoding. Additionally, we propose a heuristic pilot allocation scheme that makes the best effort to slash some interference from copilot users. The simulation results show that the proposed hybrid precoding and pilot allocation scheme outperforms the existing schemes. Furthermore, we reveal the relationship between the energy and spectral efficiencies for the proposed mmWave CFmMIMO system by modeling the whole network power consumption and observe that the introduction of low-resolution DACs and PSs is effective in increasing the energy efficiency by compromising the spectral efficiency and the network power consumption.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.247-255
• /
• 2012

Daylighting has a very effective role in reducing power consumption and improving indoor environments in office buildings. Previously, it was not under consideration as a major source of renewable energy due to poor reliability in the design. Optical fiber as a transmission medium in the daylighting system demands uniform distribution of light to solve cost, heat, and efficiency issues. Therefore, this study focuses on the uniform distribution of sunlight through the fiber bundle and to the interior of the building. To this end, two efficient approaches for the fiber-based daylighting system are presented. The first approach consists of a parabolic mirror, and the second approach contains a Fresnel lens. Sunlight is captured, guided, and distributed through the concentrator, optical fibers, and lenses, respectively. At the capturing stage, uniform illumination solves the heat problem, which has critical importance in making the system cost-effective by introducing plastic optical fibers. The efficiency of the system is increased by collimated light, which helps to insert maximum light into the optical fibers. Furthermore, we find that the hybrid system of combining sunlight and light emitting diode light gives better illumination levels than that of traditional lighting systems. Simulation and experimental results have shown that the efficiency of the system is better than previous fiber-based daylighting systems.