• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.395-395
• /
• 2012

We fabricate organic-inorganic hybrid thin film for the purpose of encapsulation by molecular layer deposition (MLD) using Trimethylaluminium (TMA) and Adipoyl Chloride (AC). Ellipsometry was employed to verify self limiting reaction of ALD. Linear relationship between number of cycle and thickness was obtained. We found that desirable organic thin film fabrication is possible by MLD surface reaction in nanoscale. Purging was carried out after dosing of each precursor to form monolayer in each sequence. We also confirmed roughness of the organic thin film by atomic force microscopy. We deposit TMA and AC at $70^{\circ}C$ and that 1.78A root mean square was obtained which indicates that uniform organic thin film was formed. We confirmed precursor's functional group by IR spectrum. We calculated WVTR of organic-inorganic hybrid super-lattice epitaxial layer using Ca test. WVTR indicates superlattice film can be possibly use as encapsulation in flexible devices.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.357-362
• /
• 2007

Polyimide/carbon nanotube (CNT) composite films, for potential use in high performance microelectronics and aerospace applications, were prepared by mixing a polyisoimide (PII) solution and a CNT suspension in NMP, followed by casting, evaporation and thermal imidization. The CNTs were modified by a nitric acid treatment to improve the thermal and electrical properties, as well as to provide good dispersion of the CNTs in a polymer matrix. The formation of functional groups on the modified CNT was confirmed by Raman spectroscopy. Scanning electron microscopy revealed the modified CNTs to be well dispersed in the polyimide matrix, with a uniform diameter of ca. 50 nm. The thermal stability of the films containing the CNTs was improved due to the enhanced interfacial interaction and good dispersion between the polyimide matrix and modified CNTs. In addition, the thermal expansion coefficient of the composites films was slightly decreased, but the dielectric constants increased linearly with increasing CNT content.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.222-226
• /
• 2016

The synthesis of pure calcium carbonate nanocrystals was achieved using a simultaneous injection method to produce nano particles of uniform size. These were characterized using scanning electron microscopy and powder X-ray diffraction. The nano particles were needle-shaped aragonite polymorphs, approximately 100-200 nm in length. The aragonite polymorph of calcium carbonate was prepared using aqueous solutions of $CaCl_2$ and $Na_2CO_3$, which were injected simultaneously into double distilled water at $50^{\circ}C$ and then allowed to react for 1.5 h. The resulting whisker-type nano aragonite with high aspect ratio (30) is biocompatible and potentially suitable for applications in light weight plastics, as well as in the medical, pharmaceutical, cosmetic and paint industries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.65-66
• /
• 1994

This paper describes study on the preparation of ferrite powder for bonded mallets. The specimen which has the basic composition of SrO$.$nF$_2$O$_3$ with n=5.9 is in nonstoichiomatric region. Calcination is performed under N$_2$ atmosphere 1175$^{\circ}C$, 1200$^{\circ}C$, 1225$^{\circ}C$, 1250$^{\circ}C$ and 1275$^{\circ}C$ respectively. Then, Cooling is carried out in the furnace. In order to increase coecivity and obtain uniform grain size, we add to the specimen 0.7wt%CaCO$_3$, 0.3wt % SiO$_2$, 0.5wt%Na$_2$SiO$_3$ and 0.5wr% Al$_2$O$_3$. Also, in order to increase milling effect, carbon coating on sample particles is tried. As the result, single magnetic domain partic1e with Size of 1$\mu\textrm{m}$ in obtained and magnetic properties are improved.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.2
• /
• pp.59-70
• /
• 2001

White uniformity is one of the important inspection factors determining the image quality of CRT screen. In the full white pattern, white uniformity means the degree of uniform distribution of white color across the whole screen. To elicit the sensitivity factors affecting the decision of the white uniformity quality, experiments in which participants were confronted with 6 evaluation points embedded in 3 measurement groups on a CRT screen were conducted to gather the psychophysical data that are the level of white uniformity subjects perceived and CA100 produced. These data were used to develop a modified CIE1976 equation for calculating white uniformity. Performance comparison between the original CIE1976 equation and the modified equation was conducted in terms of accuracy test and magnitude estimation. It was concluded the modified equation is more sensitive in the change of white uniformity, compared to the original CIE1976 equation.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.43-48
• /
• 2007

This study investigated the effects of pH, alkalinity, and chlorine ion which are important water quality impact factors to the corrosion in the simulated distribution system where the copper pipe is affixed. The result shows that pitting index was increased as the alkalinity and chloride ion increase in the distilled water, but there was no relation to pH. Actually the uniform corrosion rate was decreased as the pH increase with the laboratory tap water. In conclusion, it is necessary to control the pH which stands above minimum 7.5 to prevent pitting corrosion in the copper pipe. Consequently, comprehensive research about the effect of lime soda($Ca(OH)_2$) which was used as a coagulation additive in the water treatment plant to pipe corrosion must be accomplished additionally.

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.499-504
• /
• 1998

ZnO varistors having a composition of 98.0 mol% ZnO 1.0 mol% $Bi_2O_3$ 0.5 mol% $MnO_2$ were prepared by the Pechini process and the sintering behavior and electrical characteristics were studied. ZnO varis-색 powder with $1.5\mu\textrm{m}$ mean diameter and narow particle size distribution was obtained using the Pechni pro-cess. Typical intermediate stage grain growth of liquid phase sintering was observed by sintering at $1100^{\circ}C$ At this temperature ZnO varistors having uniform grain size and Bi-rich liquid phase distributed uniformly along grain boundaries were prepared. The nonlinear coefficients of the ZnO varistors were in the range of 40-60 The breakdown voltages of the varistors were nearly inversely propeortional to the grain size which reflects that ZnO varistors prepared by the Pechini process have uniform distribution of Bi-rich liquid phase along grain boundaries It is believed that the microstructures of ZnO varistors can be controlled effectively by using the Pechini process which makes the control of the electrical properties of ZnO varistors possible.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.260-264
• /
• 1985

Ferrallitique soils are real tropical soils, with an oxic B horizon such a horizon is at least 30cm thick, has > 15% clay, diffuse horizon boundaries, no weatherable minerals and a CEC of clay < 16 me per 100g. These soils are in general the real reddish or yellowish very uniform tropical clay soils with an orchric A horizon and a deep B horizon, otherwise almost characterless. The soil profile looks uniform and maybe some metres thick. It is well drained, has a good permeability and a stable structure. As there is little or no weatherable mineral, because these soils are old and exhausted of bares, natural fertility is very low. There has been a complicated process of soil formation. Intensive and continuous weathering over a very long period has resulted in leaching of bases and silica, in relative accumulation of resquioxides and in formation of kaolinitic clay. Until recently, there has been much confusion in classifing and naming tropical soils. Particularily what are now Ferralsols in the FAO scheme, and Oxisols in Soil Taxonomy. Old names of various classification system are: Lateritic soils, Latosols, Ferrallitic soils. For agriculture, these soils are important, but chemically very poor, not only because of a low CEC but also because of deficiency of bases, especially Ca, Mg, and K, strong P fixation and high exchangeable Al percentage.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.277-284
• /
• 2006

Seed priming is a useful technique for early establishment of seedling. In this experiment, the conditions for priming of pasture seeds (tall fescue, orchardgrass, alfalfa and white clover) have been optimized to ensure an early germination and more uniform growth of seedlings. The experiment was conducted in a split plot design with three replications. The main plots consisted of five different materials such as $KNO_3,\;KH_2PO_4,\;K_3PO_4,\;Ca(NO_3){_2}$ and PEG. The subplots were consisted of three chemical concentration groups such as 500mM (or 10%), 100mM (or 20%) and 200mM (or 30%). Effect of priming materials and its concentrations were different in all four pasture seeds examined. Chemical concentration did not show any significant effects on the germination of tall fescue, however, germination of tall fescue primed with $Ca(NO_3){_2}\;and\;K_3PO_4$ materials were higher than the others. The concentration of prime materials did not affect on the germination of orchardgrass, but germination of orchardgrass primed with $KH_2PO_4$ was showed better result than the other materials examined. The seeds of alfalfa and white clover primed with PEG showed better germination capability than the other priming materials. In addition, chemical concentration of primed seeds also showed significant difference on the germination of alfalfa and white clover. These results suggest that seed priming induced earlier and higher germination for all four pastures tested. However, the, degree of priming effectiveness on pasture species depending on the priming materials and its concentrations.