• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1099-1104
• /
• 2007

A 1:6 Unequal 2-way Wilkinson power divider is proposed. The required microstrip line with $207{\Omega}$ characteristic impedance for 1:6 power divider is realized by adding defected ground structure (DGS) to the standard microstrip line. The adopted DGS has the rectangular geometry which results in the increased characteristic impedance. The rectangular-shaped DGS produces the transmission line having much higher characteristic impedance due to the increased equivalent inductance. The measured performances of the fabricated 1:6 power divider show the expected S-parameters with a good agreement with the predicted ones.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.229-235
• /
• 2021

This paper proposes a method of implementing an unequal power divider for high splitting ratios by using transmission lines connected with open and short stubs. The proposed method is an equivalent circuit analysis of a transmission line with an additional port so that it can be converted to an arbitrary impedance in the center of a 2-port transmission line and a 3-port transmission line with an open or short stub connected in parallel to each port. To prove the validity of this method, a Wilkinson power divider with k² = 20 dB splitting ratio and a Gysel power divider with k² = 17 dB splitting ratio were designed at a center frequency of 1 GHz using a 3-port transmission line equivalent circuit. The experimental results of the electrical characteristics are in good agreement with the simulation.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.289-294
• /
• 2002

The broadband high power 3-way combiner was designed and fabricated for the digital TV repeater. To achieve increase of the bandwidth and the high power capability, Wilkinson type power divider was adopted in our research. First of all, Wilkinson type power divider of equal-split and unequal-split were combined, and the characteristics of the four port in-phase power combiner was simulated for each thickness of dielectric substrates. As the results of simulation, the power combiner fabricated by using dielectric substrate of 120 mil-thickness has the characteristics as follows: insertion loss of less than -651 dB, reflection coefficient of less than -13 dB, isolation among the output ports of less than -15 dB, and pose difference among the output ports of smiler than 13$^{\circ}$. Therefore, this power combiner was possible to improve the limit of microstrip line width due to high impedance, the problem of power loss due to interaction between strip lines in a high power combiner and narrow bandwidth simultaneously. Furthermore, making broadband and high power could be achieved since the fabricated 3-way combiner has good characteristics of insertion loss, the reflection coefficient, separation between ports, and phase difference.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.245-251
• /
• 2017

The proposed variable pawer divider in this paper is composed of one equal power 2-way Wilkinson power divider, two variable phase shifters with 90-degree phase variation to be connected two output paths of the 2-way power divider, and one branchline coupler to combine output signals of two variable phase shifter. The proposed variable power divider can theoretically have an arbitrary power division ratio ranging from ${\infty}:1$ to ${\infty}:1$ due to 90-degrees phase variation of two phase shifter. The proposed power divider circuit fabricates on laminated TLX-9(h=20 mil, er=2.5; Taconic) with a center frequency of 1.7 GHz. The power division ratio of the fabricated prototype varies from about 1:100 to 200:1, with an input reflection characteristic(S11) of below -16 dB, an insertion loss of about -1.0 dB, and an isolation characteristic of below -17 dB between two output ports in the range 1.65-1.75 GHz.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.115-118
• /
• 2004

본 논문에서는 DGS를 이용한 밀리미터대역의 2:1 비대칭 윌킨슨 전력분배기를 설계하였다. DSG(Defected Ground Structure)의 전파지연특성과 전송선로의 높은 임피던스 특성을 이용하여 전력분배기의 크기감소와 구현의 용이성을 실현하였다. 본 논문에서 설계한 전력분배기는 MEMS 기술로 제작이 가능하며 시뮬레이션 결과를 통하여 제시된 설계방법의 타당성을 입증하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.63-69
• /
• 2010

In this paper, a new design method of asymmetrical configuration of main amplifier and peaking amplifier using changed bias point is proposed for excellent linearity, instead of the conventional Doherty structure. We have utilized the uneven wilkinson power divider for the unequal power drive at the input network of amplifiers. And we proposed a compensating method of the decreasing efficiency due to improving linearity using 3-stage Doherty structures. From the simulation results of asymmetrical Dohertry power amplifier and asymmetrical 3-stage Doherty power amplifier with uneven power drive are implemented. From the implementation and measurement results of the each amplifier, IMD characteristics have -55 dBc as the good efficiency of 13% compensates the decreased entire efficiency due to the improving linearity characteristics.