• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.68-75
• /
• 2010

Around the Nakdong River which is one part of the repairing business of 4 Grand Rivers currently being constructed, sandy ground is distributed throughout the wide area. Many civil engineering structures such as small and medium sized dams, flood control basins, and redevelopment of reservoirs and retention reservoirs are scheduled to be constructed, so the prevention measures for liquefaction are surely needed. To identify such liquefaction, a lot of factor affecting the strength of liquefaction were studied through laboratory investigation. Most of the conducted study was about clean sands, but in the case of the real ground the sand can exist not in the clean conditions but in the conditions mostly including sand of fine grained soil. The sand of fine grained soil has become a significant factor to assess liquefaction because many cases of liquefaction happened in the silty and clayer soil. In this study, un-drained tests of plasticity index of fine grained particles were conducted with the sands from Nakdong River. In result, the study shows that dynamic shear strength characteristics differ according to the plasticity index.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.665-672
• /
• 2002

In order to expand agricultural lands in the western and southern coasts of Korean Peninsula, coarse soils excavated from hillsides have been used as fill materials for reclamation. In order to tackle with the problems and to confirm availability, research on soil improvement involve mixing cement to the fine wet soils. Required undrained shear strength(c$\sub$u/) for fill material was analyzed to be 0.34∼1.2kg/$\textrm{cm}^2$. It has been known that when cement is added to high water content marine clay, its unconfined compression strength increased to 2kg/$\textrm{cm}^2$. Consolidation results show that pre-consolidation pressure increased to 1.8kg/$\textrm{cm}^2$ and 3.4kg/$\textrm{cm}^2$ with the addition of 3% and 5% of cement respectively. This result shows that low-height embankments could be constructed without significant compression. Since the effectiveness of improvement may be different site by site, the mix design for each site is necessary in order to optimize it. The process is first to determine aimed shear strength and then optimum mix ratio of cement after carrying out a series of tests.

• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.463-470
• /
• 2016

베인 전단시험은 흙의 교란을 최소화하면서 점성토의 비배수전단강도를 측정하는 간단한 시험이다. 하지만, 본 논문에서는 베인 전단시험기를 이용하여 모래의 배수전단강도를 측정하기 위한 연구를 수행하였다. 건조한 낙동강모래를 원통형 셀에 느슨하거나 조밀한 상태로 재성형한 다음 상부에서 공기압 실린더로 상재하중(overburden pressure)을 25, 50, 75 또는 100kPa 가한 다음 베인(직경 5cm, 높이 10cm)을 회전시켜 회전 모멘트인 최대 토크를 구하였다. 베인 회전 모멘트와 모래 입자의 마찰 저항 모멘트가 평형을 이룬다는 조건을 이용하여 모래의 마찰각을 구하였다. 점토의 경우에는 베인 전단 시 원통형의 회전체 상하면과 주면에 균일한 비배수전단강도인 점착력이 작용한다고 가정하지만, 사질토를 사용한 본 연구에서는 베인 날 주면에서 형성되는 파괴면을 원기둥, 팔각기둥 또는 사각기둥 형태로 가정하여 각각에 대한 마찰각을 계산하였다. 한편, 본 연구에서 제안한 방법을 검증하기 위해 동일한 모래로 직접전단시험을 실시하여 마찰각을 구하였다. 베인 전단시험으로부터 구한 마찰각은 가정한 파괴면의 형태에 따라 느슨한 모래의 경우 24-42도, 조밀한 모래는 33-53도 사이이며, 직접전단시험 결과는 이 범위 내에 속하였다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권2호
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• 한국지반공학회논문집
• /
• 제18권3호
• /
• pp.73-85
• /
• 2002

본 논문에서는 비등방 압밀된 낙동강 포화모래의 비배수 반복 전단강도 거동이 연구되었으며, 등방압밀된 시료의 반복삼축시험은 비등방 압밀시료와의 비교를 위하여 수행되었다. 초기 정적 전단음력과 상대밀도의 다양한 조합하에 반복 전단강도는 고찰되었다. 음력반전과 비응력반전 모두에 대하여 반복하중을 받는 시료의 파괴는 5%의 양진폭변형율과 5%의 잔류축변형율로서 정의하였다. 비등방 압밀된 시료의 반복 전단강도는 초기 정적 전단강도에 영향을 받는 것으로 나타났다. 비등방 압밀 낙동강 모래의 반복 전단강도는 Toyoura 실리카 모래의 전단강도 보다는 크지만, Dogs Bay 카보나이트 모래의 전단강도 보다는 작게 나타났다. 실험결과와 예측결과의 비교에 의하면, 낙동강 모래의 잔류 간극수압에 대한 Hyodo 모델의 적용성이 입증되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 봄 학술회 논문집
• /
• pp.9-14
• /
• 1993

Practical solutions that are available today for assessing stability of tunnel working face are largely based on the concept of critical stability ratio. The accuracy of a prediction of the soil behavior in the working face, thus, depends on the ability of the solution to completely and accurately describe the stress fields or kinematics generated by the excavation and the accuracy of the undrained shear strength of the soil introduced in the computation. This paper reviews the selected solutions describing stability of the tunnel heading in squeezing ground, and suggests a reference solution which is established based on comparison of the solutions and field data on stability of tunnel headings in clays. Although dealing with the shear strength determination is an important companion part of the geotechnical prediction for stability of the tunnel heading in clays, this part is beyond the scope of this paper at this time.

• 한국지반환경공학회 논문집
• /
• 제4권4호
• /
• pp.61-71
• /
• 2003

실트질 점토로 이루어진 연약지반의 호안 제방축조는 성토 제방하중에 의한 연약지반내 강제치환 공법으로 이루어지고 있으며, 축조 제방하부 강제치환 깊이는 호안 제방의 안정성에 큰 영향을 미치고 있다. 기존의 제방하부 강제치환 깊이 산정방법은 하부 연약점토지반의 비배수 전단강도 증분율을 고려한 제방하부 연약지반의 지지력과 성토제방 하중에 의해 산정하고 있다. 그러나 지반 층후 특성에 따라 중간층 형태의 점토질 실트층 또는 모래층이 있는 경우가 있으며, 이러한 점토질 실트층 또는 모래층은 제방하부 연약지반의 지지력에 영향을 미치게 되어 강제치환 깊이에 영향을 미치게 된다. 본 논문에서는 중간 모래층이 있는 연약지반내 제방 축조시 강제치환 깊이를 Perloff et al.(1967) 영향계수를 고려한 성토제방 하중과 층두께 가중평균 지지력(Bowles, 1988)에 의해 산정하였으며, 수치해석(FLAC)적 방법에 의한 산정결과와 비교 분석하였다. 해석결과 제방하부 접지폭이 $0.2B_o$(중간 모래층), $0.5B_o$(단일층)인 경우 산정된 강제치환 깊이는 수치해석과 매우 근접하는 것을 알 수 있었으며, 제방 하부 접지폭의 영향보다 비배수 전단강도 및 중간 모래층 두께, 중간 모래층 위치의 영향이 큰 것을 알 수 있었다. 또한 중간 모래층 두께가 작을수록 강제치환 깊이는 증가하며, 중간 모래층 위치가 증가 할수록 강제치환 깊이는 증가하고, 비배수 전단강도가 감소할수록 강제치환 깊이가 증가하는 것을 알 수 있었다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.39-41
• /
• 2004

The engineering properties of the geomaterial, an essential material in construction engineering, are significantly influenced by consolidation mode, which is called inherent anisotropy. Speically cohesive soils feature the anisotropy mainly due to their flate-like minerals and chemical interactions. In this research, an experimental study was conducted for the investigation of the anisoropy. Three isotropic and four anisotropic consolidated-undrained triaxial compression tests were performed for the cohesive specimens with various stress ratios of consolidation. The effects of the consolidation mode for cohesive soils were presented and investigated in stress-strain behavior, pore water pressure, and undrained shear strength of the test results.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.438-447
• /
• 2018

For a fixed jacket type offshore structure directly supported by the seabed, the structural behavior of offshore structure depends on the soil properties. Soil properties affect on the stiffness of the piles and the boundary condition in the structural analysis. The structural analysis is performed using PSI (Pile-Soil Interaction) suggested in the code and design rule. PSI analysis of the jacket structure is carried out after various soil types are selected according to the soil properties like internal friction angle, undrained shear strength, unit weight and so on. Three types of soil are selected by varying strength for a clay and sand, respectively. The structural analysis of the jacket structure is performed using these soils. The results about axial and lateral reaction force and the stress and displacement on the structure are compared. As a results, the structural response is smaller as the soil becomes more stiff. In conclusion, it is confirmed that the structural response of fixed jacket type offshore platform supported by seabed is sensitive to the change of soil properties.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.74-83
• /
• 1994

A series of isotropic consolidation tests, undrained and drained triaxial compression tests was carried out to investigate the physical characteristics and behaviours of marine silty sands collected from the western coast of Korea. This study also included a theoretical development of the constitutive equation to evaluate stress-strain relationship and volume change of silty sands. The results and main conclusions of the study are summarized as follows; 1. Isotropic compression and swelling index are linearly decreased with an increase in relative density. 2. Both undrained shear strengh and elastic modulus are increased with an increase in relative density and confining pressure. 3. Internal friction angles obtained from drained and undrained compression tests of the soils are proportional to relative density. 4. The phenomenon of dilatancy of each sample is less profound when confining stress is increased but more profound when relative density is increased. 5. The slope of critical state lines is 1.78 for Saemangum, 1.70 for Siewha and 1.26 for Sukmoon sands. 6. In this study, Drucker-Praper type criterion is used and hardening function of Cap model is modified by hyperbolic fuction. This will improve a lack of physical meaning of hardening parameters in conventional Cap model. 7. A newly developed constitutive equation to the forementioned silty sands and checked its applicability. This is in good agreement with the measured data.