• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1796-1801
• /
• 2007

Piezocone penetration testing(CPTu) results such as cone resistance$(q_c)$, sleeve friction$(f_s)$, and pore pressure(u), have been carried out at 5 sites in Honam high-speed railway areas of Korea, in order to continuously estimate the characteristics of soil layers and the undrained shear strength$(S_u)$ in a soft ground. For the applications of the conventional CPTu results to undrained shear strength, the cone factors$(N_{kt})$ were deduced based on Field vane tests, and Monte-Carlo Simulation(MCS). Moreover the correlations of the undrained shear strength of CPTu by soil depths were compared and revised with the results of triaxial compression(UU test), field vane and Dilatometer tests(DMT). The depths of soft foundation at 5 sites in Honam high-speed railway areas were calculated based on the results of the various field tests in addition CPTu. The applicability of CPTu for a soft foundation criterion referred to the criteria of high-speed railway and related agencies in Korea was evaluated.

• 한국지반공학회지:지반
• /
• 제9권4호
• /
• pp.27-36
• /
• 1993

본 연구에서는 실트흙의 거동에 대하여 자동화된 삼축시험기를 사용하여 정하중(monotonic loading)과 반복 동하중(cyclic loading)하에서 파괴전과 파괴상태시 응력 변형률 상태를 제시하였다. 시료성형을 위하여 순수 실트인 실리카 분말을 사용했으며 시료는 조밀한 경우(D,=80%, eo=0.68)와 느슨한 경우(D,=35pl, eo=0.9)의 2종류로 만들어 등방 압밀후 배수. 비배수 상태하 에서 삼축압축과 인장시험을,비배수 상태하에서 반복 동하중 시험을 하였다. 해석 결과 전반적인 실트의 거동은 사질토와 비슷하지만 점토질흙에 비해서는 체적팽창(dilatancy)으로 인하여 정하중과 반복동하중하에서 상당히 다른 거동을 보임을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제9권6호
• /
• pp.729-742
• /
• 2015

The aim of the present work was the study of instability in a loose sand from Les Dunes beach in Ain Beninan, Algeria, where the Boumerdes earthquake occurred in 2003. This earthquake caused significant structural damages and claimed the lives of many people. Damages caused to infrastructures were strongly related to phenomena of liquefaction. The study was based on the results of two drained and six undrained triaxial tests over a local sand collected in a region where liquefaction occurred. All the tests hereby analyzed followed compression stress-paths in monotonic conditions and the specimens were isotropically consolidated, since the objective was to study the instability due to static loading as part of a more general project, which also included cyclic studies. The instability was modeled with the second-order work increment criterion. The definition of the instability line for Les Dunes sand and its relation with yield surfaces allowed the identification of the region of potential instability and helped in the evaluation of the susceptibility of soils to liquefy under undrained conditions and its modeling. The dilatancy rate was studied in the points where instability began. Some mixed tests were also simulated, starting with drained conditions and then changing to undrained conditions at different time steps.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.382-387
• /
• 1998

Triaxial compression tests were run to study on the undrained strength characteristics of fiber mixed kaolin clay(Hadong). The influence of various test parameters such as amount and aspect ratio(ratio of length to diameter) of fiber, confining stress was also investigated. Test results showed that the increase in aspect ratio was increased in deviator stress at failure, but no effect on pore water pressure at failure. Deviator stress at failure was also increased at 0.5％ mixing ratio(weight fraction of fiber to that of soil solid) of fiber but it was, thereafter, decreased and wits reached to constant after 2％ mixing ratio. On the contrary, Pore water pressure at failure was increased as mixing ratio of fiber was greater than 1%. Deviator stress and pore water pressure of both clay and fiber mixed clay(FMC) at failure were increased as confining stress was increased. Deviator stress of FMC at failure was about 10％ larger than that of clay, but pore water pressure of FMC at failure was almost similar to that of clay.

• 한국농공학회논문집
• /
• 제48권7호
• /
• pp.35-43
• /
• 2006

This study was carried out to investigate the liquefaction behaviour and predict deviator stress with matric suction, of unsaturated silty sand. The unsaturated soil tests were conducted using a modified triaxial cell and specimens were prepared using the moisture tamping method. The axis translation technique was used to create the desired matric suctions in the specimen. Undrained triaxial compression tests were carried out at matric suction of 0, 2, 5, 10 and 25 kPa. The specimens were sheared to axial strains of about 20% to obtain steady state conditions. The results showed that liquefaction of silty sand only occurs at matric suction of 0 kPa and 2 kPa. The results also show that at matric suctions of 5, 10 and 25 kPa, the resistance to liquefaction increases. As the suction increases, the undrained effective stress path approached the drained stress path. Also, the predicted and measured maximum deviator stress for unsaturated soils using the effective stress concept showed good agreement as matric suction increases. The deviator stress increase is nonlinear as matric suction increases.

• 한국농공학회논문집
• /
• 제48권4호
• /
• pp.67-74
• /
• 2006

This study was carried out to investigate the liquefaction behaviour of saturated silty sand under monotonic loading conditions. The undrained soil tests were conducted using a modified triaxial cell and specimens were prepared using the moisture tamping method. Undrained triaxial compression tests were performed at different confining pressures, void ratios and overconsolidation ratios and the samples were sheared to axial strains of about 20% to obtain monotonic loading conditions. It is shown that increasing confining pressures, void ratios and overconsoildation ratios increases the deviator stress, but it has no effect on increasing the dilatant tendencies. It is shown that complete static liquefaction was observed regardless of increases in the confining pressure, void ratio and overconsolidation ratio. Therefore, the confining pressure, void ratio and overconsoildation ratio does not provide significant effects on the liquefaction resistance of the silty sand. The presence of fines in the soil was shown to greatly increase the potential for static liquefaction and creates a particle structure with high compressibility for all cases.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.41-54
• /
• 1994

본 문은 입방체 삼축시험기에 의한 점토지반의 특성을 연구하기 위하여 Lade형의 삼축시험기를 시험제작하여 그 특성을 논하고 이 시험기를 이용하여 점성토에 대해서 압밀 비배수 시험과 평면변형률의 실험결과를 바탕으로 입방체 시료와 평면변형률 상태의 시료에 대해서 축차응력, 간극수압, 응력경로 등에 대해서 상호 비교한 것이다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.39-41
• /
• 2004

The engineering properties of the geomaterial, an essential material in construction engineering, are significantly influenced by consolidation mode, which is called inherent anisotropy. Speically cohesive soils feature the anisotropy mainly due to their flate-like minerals and chemical interactions. In this research, an experimental study was conducted for the investigation of the anisoropy. Three isotropic and four anisotropic consolidated-undrained triaxial compression tests were performed for the cohesive specimens with various stress ratios of consolidation. The effects of the consolidation mode for cohesive soils were presented and investigated in stress-strain behavior, pore water pressure, and undrained shear strength of the test results.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.427-437
• /
• 2019

Waste materials are being produced in huge quantities globally, and the usual practice is to dump them into legal or illegal landfills. Recycled tiles (RT) are being used in soil stabilisation which is considered as sustainable solution to reduce the amount of waste and solve the geotechnical problems. Although the stabilisation of soil using RT improved the soil properties, it could not achieve the standard values required for construction. Thus, this study uses 20% RT together with low cement content (2%) to stabilise soft soil. Series of consolidated undrained triaxial compression tests were conducted on untreated and RT-cement treated samples. Each test was performed at 7, 14, and 28 days curing period and 50, 100, and 200 kPa confining pressures. The results revealed an improvement in the undrained shear strength parameters (cohesion and internal frication angle) of treated specimens compared to the untreated ones. The cohesion and friction angle of the treated samples were increased with the increase in curing time and confining pressure. The peak deviator stress of treated samples increases with the increment of either the effective confining pressures or the curing period. Microstructural and chemical tests were performed on both untreated and RT-cement treated samples, which included field emission scanning electron microscopic (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and energy dispersive X-ray spectrometer (EDX). The results indicated the formation of cementation compounds such as calcium aluminium hydrate (C-A-H) within the treated samples. Consequently, the newly formed compounds were responsible for the improvement observed in the results of the triaxial tests. This research promotes the utilisation of RT to reduce the amount of cement used in soil stabilisation for cleaner planet and sustainable environment.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.169-179
• /
• 2003

연약지반에 축조되는 구조물 설계에 매우 중요한 지반 특성치인 점토지반의 비배수 전단강도를 깊이에 따라 연속적으로 측정할 수 있는 현장 원위치 시험법으로서 피에조 콘의 활용도가 점점 높아지고 있다. 피에조 콘 시험으로 추정되는 비배수 강도의 신뢰성은 이에 적용되는 콘 계수 값의 신뢰성에 크게 의존한다. 콘 계수에 대한 여러 연구자들의 제안이 우리의 실정에 맞는지 검증하고 점토지반의 특성에 따른 콘 계수 값의 변화 특성을 파악하여 콘 계수 선정에 대한 합리적인 기준을 마련하는 것이 이 연구의 목적이다. 이 연구는 경남 양산물금 지역의 해성점토층을 대상으로 피에조 콘 시험과 비교란 시료에 대한 실내 전단강도시험(일축압축시험, 비압밀 비배수 삼축압축시험)과 압밀시험을 실시하였다. 시험 결과를 이용하여 콘 계수와 점토의 여러 역학적 특성치(비배수 전단강도, 선행압밀압력, 소성지수, 간극수압비, 강성지수, 마찰비)의 관계를 고찰하여 콘 계수 값의 합리적 선정을 위한 기준을 마련하고자 하였다. 연구 결과로부터 얻은 결론으로서는, 상관관계가 비교적 높은 특성치의 짝은 비배수 전단강도와 콘 계수$(N_{kt}, N_{ke}, N_{\Delta u})$, 선행압밀압력과 $(N_{kt}, N_{ke})$, 간극수압비(B$_{q}$ )와 $(N_{ke}, N_{\Delta u})$이었고 선행압밀압력과 $(N_{\Delta u}), B_q와 (N_{kt})$는 상관 관계가 나타나지 않았으며, 소성지수, 강성지수, 그리고 마찰비도 콘 계수와 상관 관계가 없는 것으로 나타났다. 또한, 비압밀 비배수(UU) 삼축압축시험으로 구한 점토의 비배수 전단강도를 기준으로 할 때, 여러 제안자들이 제안한 피에조 콘 시험결과를 이용한 비배수 전단강도 추정에서 $(N_{\Delta u})$가 다른 두개의 콘 계수보다 선행압밀압력의 크기에 상관없이 변화폭, 표준편차 및 분산도가 모두 작아서 신뢰성이 가장 높게 나타났다.