• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.517-532
• /
• 2023

Tower structures have been widely used in communication and transmission engineering. The failure of joints is the leading cause of structure failure, which make it play a crucial role in tower structure engineering. In this study, the aluminum alloy three tube tower structure is taken as the prototype, and the middle joint of the tower was selected as the research object. Three different stainless steel-aluminum alloy composite joints (SACJs), denoted by TA, TB and TC, were designed. Finite element (FE) modeling analysis was used to compare and determine the TC joint as the best solution. Detail requirements of fasteners in the TC stainless steel-aluminum alloy composite joint (TC-SACJ) were designed and verified. In order to systematically and comprehensively study the mechanical properties of TC-SACJ under multi-directional loading conditions, the full-scale experiments and FE simulation models were all performed for mechanical response analysis. The failure modes, load-carrying capacities, and axial load versus displacement/stain testing curves of all full-scale specimens under tension/compression loading conditions were obtained. The results show that the maximum vertical displacement of aluminum alloy tube is 26.9mm, and the maximum lateral displacement of TC-SACJs is 1.0 mm. In general, the TC-SACJs are in an elastic state under the design load, which meet the design requirements and has a good safety reserve. This work can provide references for the design and engineering application of aluminum alloy tower structures.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.109-118
• /
• 2019

This paper presents the numerical simulation of membrane structure under impact load. Firstly, the numerical simulation model is validated by comparing with the test in Hao's research. Then, the effects of the shape of the projectile, the membrane prestress and the initial impact speed, are investigated for studying the dynamic response and failure mechanism, based on the membrane displacement, projectile acceleration and kinetic energy. Finally, the results show that the initial speed and the punch shape are related with the loss of kinetic energy of projectiles. Meanwhile, the membrane prestress is an important factor that affects the energy dissipation capacity and the impact resistance of membrane structures.

• 화약ㆍ발파
• /
• 제35권3호
• /
• pp.31-54
• /
• 2017

원자로가 운영되는 국가에서는 고준위방사성폐기물 처분을 위한 관련 기술개발은 지속적인 원자력에너지의 이용을 위해 시급한 해결해야할 중요한 사안으로 여겨지고 있다. 이미 중저준위처분장이 운영 중인 국내에서는 고준위방사성폐기물의 관리에 대한 관심이 높아지면서 현장실증 연구를 위한 지하연구시설 건설에 대한 관심도도 높아지고 있다. 지하심부 암반에 고준위방사성 폐기물 처분장을 건설, 운영하기 위해서는 암반 안정성이 보장되어야 한다. 암반손상대는 처분장 암반 안정성에 영향을 미치는 요소로써 해외 각국의 지하연구시설에서는 다양한 암반손상대 연구가 수행되었다. 처분 환경에서 암반손상대의 특성과 영향을 정확히 평가하기 위해서는 유사한 환경에서 기 수행된 연구 결과의 분석을 바탕으로 신뢰도 높은 조사 방법의 사용이 요구된다. 본 연구에서는 세계 각국에 건설된 지하연구시설의 현황과 암반손상대의 규모, 특성, 영향에 대한 연구 방법 및 주요 연구결과를 조사, 보고하였다. 이는 고준위폐기물 관리기술 개발을 위해 수행될 지하연구시설을 활용한 국내 관련 연구의 수행에 기여할 것으로 판단된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2000년도 정기총회 및 특별심포지움
• /
• pp.147-157
• /
• 2000

본 연구에서 개발된 시스템의 일차적인 목적은 지반조사에 사용될 3차원 탄성파 자료처리시스템으로써, 저렴한 환경의 시스템을 구축하기 위해 Linux 환경의 PC를 기반으로 개발되었다. 기본적인 자료처리 모듈들은 2차윈 탄성파 자료처리에 널리 사용되고 있는 SU(Seismic Unix)를 기반으로 하였으며, 3차원 지반조사에 적합하도록 추가적인 자료처리 모듈들이 개발되었다. 이러한 자료처리 모듈들을 이용하여 구축된 시스템은, 처리과정 중에 사용자가 쉽게 QC (Quality Control)를 할 수 있도록 GUI (Graphic User Interface)환경으로 설계되었으며, 이를 구현하기 위해 최근 Linux용 어플리케이션 개발에 보편적으로 쓰이는 GTK (Gimp Tool Kit)가 사용되었다.

• Earthquakes and Structures
• /
• 제13권6호
• /
• pp.519-529
• /
• 2017

The surrounding rocks of underground openings are natural materials and their mechanical behavior under seismic load is different from traditional man-made materials. This paper proposes a framework to comprehensively model the mechanical behavior of surrounding rocks. Firstly, the effects of seismic load on the surrounding rocks are summarized. Three mechanical effects and the mechanism, including the strengthening effect, the degradation effect, and the relaxation effect, are detailed, respectively. Then, the framework for modelling the mechanical behavior of surrounding rocks are outlined. The strain-dependent characteristics of rocks under seismic load is considered to model the strengthening effect. The damage concept under cyclic load is introduced to model the degradation effect. The quantitative relationship between the damage coefficient and the relaxation zone is established to model the relaxation effect. The major effects caused by seismic load, in this way, are all considered in the proposed framework. Afterwards, an independently developed 3D dynamic FEM analysis code is adopted to include the algorithms and models of the framework. Finally, the proposed framework is illustrated with its application to an underground opening subjected to earthquake impact. The calculation results and post-earthquake survey conclusions are seen to agree well, indicating the effectiveness of the proposed framework. Based on the numerical calculation results, post-earthquake reinforcement measures are suggested.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.628-634
• /
• 2014

This paper investigates the transient characteristics of grounding systems used in under-ground distribution power cables. Recently, two kinds of grounding system are used for underground distribution cables in Korea. The first one is conventional multi-point grounding system, the other is newly proposed non-bundled common grounding system. The non-bundled common grounding system has an advantage the decreasing the power loss due to decrease of the shield circulation current. In this paper, the lightning overvoltage induced in neutral wire (in case of non-bundled common grounding system, overvoltage between opened neural wires and grounding in each phase) of these two kinds of grounding systems are estimated and compared by field tests and EMTP simulations. The EMTP simulation methods are firstly verified by comparison of measurement and simulation. Finally, the insulation level against lightning is expected by EMTP simulation results using verified model.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.561-569
• /
• 2018

Ground vibration is one of the most undesirable effects induced by blast operation in mountain tunnels, which could cause negative impacts on the residents living nearby and adjacent structures. The ground vibration effects can be well represented by peak particle velocity (PPV) and corner frequency ($f_c$) on the ground. In this research, the PPV and the corner frequency of the mountain surface above the large-span tunnel of the new Badaling tunnel are observed by using the microseismic monitoring technique. A total of 53 sets of monitoring results caused by the blast inside tunnel are recorded. It is found that the measured values of PPV are lower than the allowable value. The measured values of corner frequency are greater than the natural frequencies of the Great Wall, which will not produce resonant vibration of the Great Wall. The vibration effects of associated parameters on the PPV and corner frequency which include blast charge, rock mass condition, and distance from the blast point to mountain surface, are studied by regression analysis. Empirical formulas are proposed to predict the PPV and the corner frequency of the Great Wall and surface structures due to blast, which can be used to determine the suitable blast charge inside the tunnel.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1068-1075
• /
• 2006

Flow-able backfill is known as soil-cement slurry, void fill, and controlled low-strength material (CLSM). The benefits of CLSM include reduced equipment costs, faster construction, re-excavation in the future, and the ability to place material in confined spaces such as narrow parts nearly impossible for compaction or perimeter of underground power cables. A review of some recent full-scale tests carried out by KEPRI on slurry backfill materials for application in underground power cable was presented. Based on this research, applicability was assessed and compare to results of laboratory tests for improved slurry materials with optimal mixture contents.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.267-279
• /
• 2023

Data modelling and interpretation for structural health monitoring (SHM) field data are critical for evaluating structural performance and quantifying the vulnerability of infrastructure systems. In order to improve the data modelling accuracy, and extend the application range from data regression analysis to out-of-sample forecasting analysis, an improved most likely heteroscedastic Gaussian process (iMLHGP) methodology is proposed in this study by the incorporation of the outof-sample forecasting algorithm. The proposed iMLHGP method overcomes this limitation of constant variance of Gaussian process (GP), and can be used for estimating non-stationary typhoon-induced response statistics with high volatility. The first attempt at performing data regression and forecasting analysis on structural responses using the proposed iMLHGP method has been presented by applying it to real-world filed SHM data from an instrumented cable-stay bridge during typhoon events. Uncertainty quantification and correlation analysis were also carried out to investigate the influence of typhoons on bridge strain data. Results show that the iMLHGP method has high accuracy in both regression and out-of-sample forecasting. The iMLHGP framework takes both data heteroscedasticity and accurate analytical processing of noise variance (replace with a point estimation on the most likely value) into account to avoid the intensive computational effort. According to uncertainty quantification and correlation analysis results, the uncertainties of strain measurements are affected by both traffic and wind speed. The overall change of bridge strain is affected by temperature, and the local fluctuation is greatly affected by wind speed in typhoon conditions.