기상레이더의 관측 특성상, 지형클러터 등의 관측영역 한계로 인한 관측공백 지역이 발생한다. 이러한 레이더 빔의 차폐는 강우량의 과소추정 원인이 된다. 이를 해결하기 위해 본 연구에서는 Hybrid Scan Reflectivity (HSR) 기법을 개발하고 기존 방법 결과와 비교하였다. 결과에 의하면, 기존 레이더 관측방법으로 지형에 의해 반사도 정보를 얻지 못하는 영역에 대하여 HSR 기법이 레이더 강우량을 추정할 수 있음을 확인하였다. 반사도 스캔기법과 빔차폐/비 빔차폐영역에서 모두 HSR 기법을 적용한 결과가 정확성이 가장 뛰어났다. 다음으로 각 방법별 레이더 추정 강우량을 HEC-HMS에 적용하여 홍수 유출량 추정 정확성을 평가하였다. HSR 기법에 의한 유출량은 RAR 산출 시스템과 M-P 관계식 대비 상관계수는 평균 7%와 10%, Nash-Sutcliffe Efficiency는 평균 18%와 34% 향상되었다. 따라서 정확한 홍수량 추정을 위해 수문분야에 HSR 기법에 의해 추정된 강우량을 활용할 필요성이 있는 것으로 사료된다.
전지구 해양 해빙 예측시스템인 NEMO-CICE/NEMOVAR의 해빙 초기조건의 특성을 2013년 6월부터 2014년 5월까지 북극영역에 대하여 분석하였다. 이를 위하여 관측 자료와 재분석 자료를 모델의 초기조건과 비교하였다. 모델 초기조건은 관측에서 나타나는 해빙 면적과 해빙 두께의 월 변동을 잘 보이는 반면, 분석 기간 동안 관측과 재분석 자료보다 북극의 해빙 면적을 좁게, 해빙 두께를 얇게 나타내었다. 모델 초기조건의 북극 해빙 면적이 좁은 것은 해빙의 경계 지역에서 해빙 농도 초기조건이 약 20% 정도 재분석자료보다 낮기 때문이다. 또한 북극 평균 해빙 두께가 얇게 나타나는 이유는 연중 두꺼운 해빙이 유지되는 그린란드 및 북극 군도와 인접한 북극해 영역에서 모델의 초기조건이 약 60 cm 정도 얇기 때문이다.
Nighttime sea fog detection from satellite is very hard due to limitation in using visible channels. Currently, most widely used method for the detection is the Dual Channel Difference (DCD) method based on Brightness Temperature Difference between 3.7 and 11 ${\mu}m$ channel (BTD). However, this method have difficulty in distinguishing between fog and low cloud, and sometimes misjudges middle/high cloud as well as clear scene as fog. Using CALIPSO Lidar Profile measurements, we have analyzed the intrinsic problems in detecting nighttime sea fog from various satellite remote sensing algorithms and suggested the direction for the improvement of the algorithm. From the comparison with CALIPSO measurements for May-July in 2011, the DCD method excessively overestimates foggy pixels (2542 pixels). Among them, only 524 pixel are real foggy pixels, but 331 pixels and 1687 pixels are clear and other type of clouds, respectively. The 514 of real foggy pixels accounts for 70% of 749 foggy pixels identified by CALIPSO. Our proposed new algorithm detects foggy pixels by comparing the difference between cloud top temperature and underneath sea surface temperature from assimilated data along with the DCD method. We have used two types of cloud top temperature, which obtained from 11 ${\mu}m$ brightness temperature (B_S1) and operational COMS algorithm (B_S2). The detected foggy 1794 pixels from B_S1 and 1490 pixel from B_S2 are significantly reduced the overestimation detected by the DCD method. However, 477 and 446 pixels have been found to be real foggy pixels, 329 and 264 pixels be clear, and 989 and 780 pixels be other type of clouds, detected by B_S1 and B_S2 respectively. The analysis of the operational COMS fog detection algorithm reveals that the cloud screening process was strictly enforced, which resulted in underestimation of foggy pixel. The 538 of total detected foggy pixels obtain only 187 of real foggy pixels, but 61 of clear pixels and 290 of other type clouds. Our analysis suggests that there is no winner for nighttime sea fog detection algorithms, but loser because real foggy pixels are less than 30% among the foggy pixels declared by all algorithms. This overwhelming evidence reveals that current nighttime sea fog algorithms have provided a lot of misjudged information, which are mostly originated from difficulty in distinguishing between clear and cloudy scene as well as fog and other type clouds. Therefore, in-depth researches are urgently required to reduce the enormous error in nighttime sea fog detection from satellite.
Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.
현재 실무에서 사용되고 있는 샌드매트의 설계법에서는 주로 수평배수층의 배수거리, 침하속도, 투수성 등을 설계 인자로 사용하고 있으며, 현장 시공 시에는 성토체 하부에 동일한 두께로 시공하고 있다. 그러나 하부 연약지반의 변형에 따라 성토 중앙부와 양단에서 부등침하가 발생하게 되어 샌드매트 두께산정에 있어 과소평가될 가능성과 배수지연을 유발할 우려가 있음이 지적되어왔다. 본 연구에서는 연약지반의 변형으로 인해 생기는 부등침하의 발생이 배수지연 및 샌드매트의 두께산정에 어떠한 영향을 미칠 수 있는지 여부를 수치해석을 통해 분석하였다. 해석 결과 부등침하로 인하여 실질 유로두께의 감소를 확인할 수 있었으며, 새로운 위치수두의 차가 발생하여 배수지연 현상을 유발할 가능성이 있음이 확인되었다. 이에 대한 대응책으로 본 연구에서는 사전에 부등침하를 예측하여 성토 중앙부의 샌드매트 두께를 증가시킨 마운드형 샌드매트의 적용성에 대하여 검토하였으며, 압밀의 진행에 따라 변형이 크게 발생하여도 소정의 실질 유로두께를 유지하고 있음을 확인하였다. 특히, 마운드형 샌드매트는 연약지반 성토와 같이 변형의 분포가 위치에 따라 다른 경우의 건설공사에 매우 유효하리라 판단하며, 경제적이고 합리적인 수평배수재로서 적용이 가능할 것으로 판단되었다. 또한, 마운드형 샌드매트의 설계를 위해서는 성토단계별로 압밀속도, 배수거리나 투수성뿐만 아니라 연약지반의 침하특성을 정확하게 예측하는 것이 필수적이라고 사료된다.
본 연구는 대중교통카드자료를 이용해서 수도권 지역간 대중교통통행에서 승객들이 겪는 환승시간, 환승회수의 환승저항을 분석한다. 현재 교통카드자료는 버스와 철도를 이용하는 수단통행을 5회까지 Trip Chian으로 기록하여 수단간 환승과 관련된 정보는 쉽게 파악된다. 그러나 수도권 교통카드는 도시철도의 통행에서 발생하는 환승역 정보를 포함하고 있지않아 Trip Chain에서 승객이 경험하는 환승저항이 저평가되는 문제가 존재한다. 따라서 철도통행에 대하여 승객행태를 반영하는 경로선택모형으로 구축하여 환승시간과 환승회수를 반영하면 온전한 환승저항의 설명력을 갖게된다. 연구방법으로서, 우선 수도권 대중교통환승에 대한 개념을 정립하여 도시철도가 포함되는 수단이용의 경우 교통카드자료의 환승저항 개념을 새롭게 정립한다. 또한 Trip Chain내에 철도의 경로선택모형을 구축하여 환승시간 및 환승회수를 대상으로 통행저항을 재평가하여 설정한다. 그리고 버스 및 도시철도 정류장 좌표를 행정동단위의 소죤 및 시군구 단위의 중죤으로 일치시키기 위해서 빅노드를 운영하는 방법을 채택한다. 마지막으로 수도권의 지역간 통행에서 철도수단이 한번 포함된 통행사슬에 대한 사례연구를 통하여 결과의 타당성을 논의한다.
Park, So-Yeon;Park, Jong Min;Choi, Chang Heon;Chun, Minsoo;Kim, Jung-in
한국의학물리학회지:의학물리
/
제27권4호
/
pp.180-188
/
2016
Acuros XB advanced dose calculation algorithm (AXB, Varian Medical Systems, Palo Alto, CA) has been released recently and provided the advantages of speed and accuracy for dose calculation. For clinical use, it is important to investigate the dosimetric performance of AXB compared to the calculation algorithm of the previous version, Anisotropic Analytical Algorithm (AAA, Varian Medical Systems, Palo Alto, CA). Ten volumetric modulated arc therapy (VMAT) plans for each of the following cases were included: head and neck (H&N), prostate, spine, and lung. The spine and lung cases were treated with stereotactic body radiation therapy (SBRT) technique. For all cases, the dose distributions were calculated using AAA and two dose reporting modes in AXB (dose-to-water, $AXB_w$, and dose-to-medium, $AXB_m$) with same plan parameters. For dosimetric evaluation, the dose-volumetric parameters were calculated for each planning target volume (PTV) and interested normal organs. The differences between AAA and AXB were statistically calculated with paired t-test. As a general trend, $AXB_w$ and $AXB_m$ showed dose underestimation as compared with AAA, which did not exceed within -3.5% and -4.5%, respectively. The maximum dose of PTV calculated by $AXB_w$ and $AXB_m$ was tended to be overestimated with the relative dose difference ranged from 1.6% to 4.6% for all cases. The absolute mean values of the relative dose differences were $1.1{\pm}1.2%$ and $2.0{\pm}1.2%$ when comparing between AAA and $AXB_w$, and AAA and $AXB_m$, respectively. For almost dose-volumetric parameters of PTV, the relative dose differences are statistically significant while there are no statistical significance for normal tissues. Both $AXB_w$ and $AXB_m$ was tended to underestimate dose for PTV and normal tissues compared to AAA. For analyzing two dose reporting modes in AXB, the dose distribution calculated by $AXB_w$ was similar to those of AAA when comparing the dose distributions between AAA and $AXB_m$.
Background: Gastric cancer (GC) is one the common lethal cancers in Iran. Detection of GC in the early stages would assesses to improve the survival of patients. In this study, we attempt to evaluate the accuracy of EUS in detection depth of invasion of GC among Iranian Patients. Materials and Methods: This study is a retrospective study of patients with pathologically confirmed GC. They underwent EUS before initiating the treatment. The accuracy of EUS and agreement between the two methods was evaluated by comparing pre treatment EUS finding with post operative histopathological results. Results: The overall accuracy of EUS for T and N staging was 67.9% and 75.47, respectively. Underestimation and overestimation was seen in 22 (14.2%) and 40 (25.6%) respectively. The EUS was more accurate in large tumors and the tumors located in the middle and lower parts of the stomach. The EUS was more sensitive in T3 staging. The values of weighted Kappa from the T and N staging were 0.53 and 0.66, respectively. Conclusions: EUS is a useful modality for evaluating the depth of invasion of GC. The accuracy of EUS was higher if the tumor was located in the lower parts of the stomach and the size of the tumor was more than 3 cm. Therefore, judgments made upon other criteria evaluated in this study need to be reconsidered.
Previous Korean total diet studies (KTDSs) have estimated dietary exposure to toxic chemicals based on 110-120 representative foods selected from over 500 foods appeared in the Korea National Health & Nutrition Examination Surveys (KNHANES), which would result in a possible underestimation. In order to find measures for a closer-to-real estimate of dietary exposure to heavy metals, this study examined the feasibility of mapping foods to the representative foods in the KTDS by comparing estimates. In mapping, those foods not analyzed in the 2009 KTDS (443 out of 559 foods appeared in the 2007 KNHANES) were mapped to the 114 representative foods used in the 2009 KTDS based on the closeness in regards to biological systematics and morphological similarity. Dietary exposures to total mercury and lead were re-estimated using the content of total mercury and lead in 114 foods analyzed in the 2009 KTDS, food intake, and individual's own body weight for respondents in the 2007 KNHANES instead of mean body weight of Koreans used in the 2009 KTDS. The re-estimates of exposure with mapping were approximately 50% higher than the original estimates reported in the 2009 KTDS. In addition, mapping enabled the comparison of percentile distribution of the exposure among populations of different age groups. In conclusion, estimates via mapping resulted in a more comprehensive estimation of dietary exposure to heavy metals present in foods that Koreans consume.
저수지 탁수 모델링에서 실측자료가 없는 경우 유입하천 부유사 농도(SS) 산정을 위해 유량(Q)과 SS 관계식이 자주 사용된다. 일반적으로 하천을 통과하는 SS 부하율은 유량에 의해 변동된다는 가정 하에 유량과 SS의 멱함수(SS=aQb) 관계가 가장 빈번히 적용되고 있다. 그러나 Q-SS 관계는 측정 지점에 따라 배타적 특성을 가지며, 동일 지점에 대해서도 연중 계절적 변동성이 있다. 더욱이, Q-SS 관계는 동일한 수문곡선에서도 유량 상승기와 하강기에 이격현상을 보이기도 한다. 본 연구의 목적은 용담댐 저수지와 소양강댐 저수지 유입 하천에서 강우시 연속 실측한 자료를 바탕으로 Q-SS 관계의 이격현상을 고찰하고, SS 부하율 산정 오차에 미치는 영향을 분석하는데 있다. 연구결과, Q-SS 관계는 홍수사상 동안 높은 분산도와 시계방향의 이격현상을 보였으며, 동일한 유량에 대해 유량 상승기가 하강기보다 SS 농도가 높게 나타났다. 이러한 이격현상은 저수지로 유입하는 SS 부하량 산정에 있어 유의할 만한 오차로 작용하였으며 Q-SS 멱함수는 실측 부하량을 과소평가하는 결과를 가져왔다. 이것은 저수지 탁수모델링에서 중요하게 고려해야 할 사항이다. 본 연구에서는 Q-SS 관계식의 대안으로 탁도-SS관계가 제시되었다. 탁도-SS 관계는Q-SS 관계보다 분산도가 작았으며 실측 부하량과의 오차를 획기적으로 줄였다. 따라서 저수지로 유입하는 SS 부하율의 보다 정확한 산정과 탁수모델링의 신뢰도를 높이기 위해서는 유입 탁도에 대한 실시간모니터링이 필요하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.