• Progress in Medical Physics
• /
• v.22 no.2
• /
• pp.92-98
• /
• 2011

This study is to keep the accuracy and stability of the output dose evaluations for linear accelerator photon beams by using the air ionization chambers (TM31010, 0.125 cc, PTW) through the Task Group 51 protocol. The absorbed dose to water calibration factor $N_{dw}{^{Co-60}}$ was delivered from the air kerma calibration factor $N_k$ which was provided from manufacture through SSDL calibration for determination of output factor. The ionization chamber of TM31010 series was reviewed the calibration factor and other parameters for reduce the uncertainty within ${\pm}2%$ discrepancy and we found the supplied $N_{dw}{^{Co-60}}$ which was derived from Nk has shown a -2.8% uncertainty compare to that of PSDL. The authors provided the program to perform the output dosimetry with TG-51 protocol as it is composed same screen of TG-51 worksheets. The evaluated dose by determination of output factor delivered to postal TLD block for comparison the output dose to that of MDACC (RPC) in postal monitoring program. The results have shown the $1.001{\pm}0.013$ for 6 MV and $0.997{\pm}0.012$ discrepancy for 15 MV X rays for 5 years followed. This study shows the evaluated outputs for linear accelerate photon beams are very close to that of international output monitor with small discrepancy of ${\pm}1.3%$ with high reliability and showing the gradually stability after 2010.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.27
• /
• pp.105-111
• /
• 1993

Human works shift its roll from physical condition to the system supervisory control task In this paper safety-presentation configuration is discussed instead of well-known fault-warning configuration. Of paticular interest was the personal factor which include the cognitive process. Through a performance between each person information processing(d') and decision process($\beta$) was pointed out to explain the sensitivity of personal cognitive process. Impact of uncertainty effect the supervisor having doubt situations. These facts are released by the use of flat fuzzy number of $\beta$ and its learning rate R.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.83-123
• /
• 1997

The psychological work environments which facilitate technology innovations in organizations are divided into two dimensions of supportive work environments and challenging work environments. The confirmatory factor analysis confirmed the construct validity of two work environments. And simple and hierarchical regression analysis confirmed the significant effects of two work environments on motivations to the technology innovations. Therefore, Both of the challenging work environments(uncertainty of exta- organizational environments and tasks) and supportive work environments(managerial environments of intra-organizations) are the two important psychological work environments which facilitate technology innovations in organizations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.116.4-116
• /
• 2001

We consider a robust configuration problem of inertial sensors for inertial navigation system(INS). Fault detection and isolation(FDI) is necessary to improve reliability of the system. For FDI, there used to be more than three mutually orthogonal sensors and thus we have to consider configuration methods of sensors. Various studies in this area have been done, but the former results did not consider effect of uncertainty(misalignment, scale factor error) to determine the configuration of the sensors. In this paper robust configuration of sensors is proposed through sensitivity analysis. Also total least square(TLS) method ...

• Journal of Korea Technology Innovation Society
• /
• v.5 no.1
• /
• pp.59-71
• /
• 2002

Risk, or exposure to uncertainty, is an inherent of risk-adjusted discount rate. It is therefore important part factor in the determination of risk-adjusted discount rate. This paper suggests the method to quantify risk and explains the process how to transfer quantified risk into incremental discount rate. The estimates of underlying risks will help determine the size of appropriate risk-adjusted discount rate with logical and scientific way when the technology valuation is made.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.75-90
• /
• 1996

The vertical distribution of HCN, $HC_3N$ and $C_2N_2$ have been determined from a sequence of Voyager 1 IRIS limb tangent measurements over Titan's north polar region. This sequence yields gas distributions with ${\sim}200\;km$ altitude resolution over the 50-400 km range. The derived mixing ratios of HCN, $HC_3N$ and $C_2N_2$ are $5{\times}10^{-7}$, $7{\times}10^{-8}$ and $8{\times}10^{-9}$, respectively, at 120 km with a factor of 3 uncertainty.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.9
• /
• pp.113-119
• /
• 2016

In this paper, a research model is proved empirically which includes factors related on the purchase intention of smart car as high innovative product in advance of commercialization. As one of relating to consumer's expectation benefit factors, individual attribute factor includes product knowledge, individual innovativeness, and sociality. Consumer's expectation benefit factor includes perceived ease-of-use, usefulness, and enjoyment. As of switching cost variables, there are financial, uncertainty, relational and psychological switching costs factors. Analysis were performed using data from the 257 respondents as random sampling among potential consumers. Purchase intention were affected by individual innovativeness mediated by perceived enjoyment, and individual sociality by perceived ease-of-use and enjoyment also. Relational switching costs factor was only a significant control variable between purchase intention with consumer's expectation benefit factor. This result presents some implications for making the new smart car's detail concept and marketing strategy related to targeting the consumer as high innovative product and technology firms including smart car makers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1489-1504
• /
• 2014

This paper is aimed to suggest a site specific partial safety factor of offshore wind turbine (OWT) pile foundation design for the offshore wind turbine complex at a West-South mainland sea in Korea. International offshore wind design standards such as IEC, GL, DNV, API, ISO and EUROCODE were compared with each partial safety factor and resistance factor. Soil uncertainty analysis using a large number of soil data sampled was carried out, and their results were adapted to estimate partial safety factor of OWT pile foundation through reliability analyses. The representative partial safety factor has been estimated as 1.3. When a proposed partial factor is willing to use to other sites, it is recommended that further studies on code calibration are required to validate their accuracy using more site characterization data.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.5-16
• /
• 2015

Considering the conversion of the Korea Construction Standards to Limit State Design (LSD), we analyzed the resistance bias factor for pullout resistance, as a part of the development of the Load and Resistance Factor Design (LRFD) for soil nailing; very few studies have been conducted on soil nailing. In order to reflect the local characteristics of soil nailing, such as the design and construction level, we collected statistics on pullout tests conducted on slopes and excavation construction sites around the country. In this study a database was built based on the geotechnical properties, soil nailing specifications, and pullout test results. The resistance bias factors are calculated to determine the resistance factor of the pullout resistance for gravity and pressurized grouting method, which are the most commonly used methods in Korea; moreover, we have relatively sufficient data on these methods. We found the resistance bias factors to be 1.144 and 1.325, which are relatively conservative values for predicting the actual ultimate pullout resistance. It showed that our designs are safer than those found in a research case in the United States (NCHRP Report); however, there was an uncertainty, $COV_R$, of 0.27-0.43 in the pullout resistance, which is relatively high. In addition, the pressurized grouting method has a greater margin of safety than the gravity grouting method, and the actual ultimate pullout resistance determined using the pressurized grouting method has low uncertainty.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1369-1382
• /
• 2018

As the number of multispectral satellites increases, it is expected that it will be possible to acquire and use images for periodically. However, there is a problem of data discrepancy due to different overpass time, period and spatial resolution. In particular, the difference in band bandwidths became different reflectance even for images taken at the same time and affect uncertainty in the analysis of vegetation activity such as vegetation index. The purpose of this study is to estimate the band adjustment factor according to the difference of bandwidth with other multispectral satellites for the application of KOMPSAT-3 satellite in agriculture field. The Spectral band adjustment factor (SBAF) were calculated using the hyperspectral satellite images acquired in the desert area. As a result of applying SBAF to the main crop area, the vegetation index showed a high agreement rate of relative percentage difference within 3% except for the Hapcheon area where the zenith angle was 25. For the estimation of SBAF, this study used only one set of images, which did not consider season and solar zenith angle of SBAF variation. Therefore, long-term analysis is necessary to solve SBAF uncertainty in the future.