• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.169-176
• /
• 2010

The Fe-treated CNT/$TiO_2$ photocatalysts mixed with anatase and rutile phase have been developed for the decomposition of non-biodegradable different organic dyes like methylene blue (MB), rhodamine B (Rh.B), and methyl orange (MO) in two conditions as ultraviolet and visible light respectively. The results indicate that all the Fe-CNT/$TiO_2$ composites proved to be more efficient photocatalysts since degradation of MB at higher reaction rates, tthe decomposition rate of different dyes increases with an increase of $Fe^{3+}$ concentration in composites the highest rate of decomposition of different dyes was noted under UV irradiation. These results can indicate that the large CNT network is facilitate the electron transfer and strongly adsorb dye molecules on the texted photocatalysts, iron is reactive in the photo-Fenton process resulting in high production of OH radicals and also high activity of the photocatalyst. And Fe particles can generate more photoinduced electrons to conduction band of $TiO_2$ under visible light irradiation. The composites of Fe-CNT/$TiO_2$ photocatalysts synthesized by a sol-gel method were characterized by BET, TEM, SEM, XRD and EDX.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.136-141
• /
• 2010

ACF/ZnO photocatalyst was synthesized by a sol-gel method using activated carbon fiber (ACF) and Zn $(NO_3)_2$ as precursors. Samples were characterized by Brunauer-Emmett-Teller measurements (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The XRD results showed that ACF/ZnO composites only included a hexagonal phase by heat-treated temperature at $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, and $700^{\circ}C$. The SEM analysis revealed that the ACF/ZnO composites did not exhibit any morphological changes of the catalyst surface according to the different heat-treated temperatures. The photocatalytic activity of the samples was tested for degradation of methylene blue (MB) solutions under ultraviolet (UV) light and ultrasonication respectively. The results showed that the photocatalytic activity of ACF/ZnO composites heat-treated at $500^{\circ}C$ was higher than other samples, which is ascribed to the fine distribution of ZnO particles on the surface of the ACF. In addition, an ultrasound of low power (50 W) was used as an irradiation source to successfully induce ACF/ZnO composites to perform sonocatalytic degradation of MB. Results indicated that the sonocatalytic method in the presence of ACF/ZnO composites is an advisable choice for the treatments of organic dyes.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.198-202
• /
• 2002

Degummed silk from Bombyx mori was dissolved in 9.3M lithium bromide solution. The regenerated silk fibroin films were completely ${\alpha}$-randomcoil type as shown by x-ray diffraction and infrared spectroscopy. The structural changes in silk fibroin induced by immersion into methanol and dilute hydrochloric acid and its photo-yellowing effect was studied. The changes of crystallinity were measured by infrared spectrometer. Yellowness index caused by ultraviolet irradiation were observed as a function of the structural change on silk fibroin. On treatment with methanol, ${\alpha}$-randomcoil silk film is converted to the ${\beta}$-form structure. After the treatment of hydrochloric acid on ${\beta}$-form structure in silk induced by immersion into methanol, ${\beta}$-form in silk fibroin is partially decreased. Crystallization owing to ${\beta}$-form transition reduced the initial yellowness index by ultraviolet irradiation. A little ${\beta}$-form structure in silk fibroin increased the initial yellowness in comparison with more ${\beta}$-form structure.

• Molecules and Cells
• /
• 제25권2호
• /
• pp.247-252
• /
• 2008

There are several branch points in the flavonoid synthesis pathway starting from chalcone. Among them, the hydroxylation of flavanone is a key step leading to flavonol and anthocyanin. The flavanone 3-${\beta}$-hydroxylase (GmF3H) gene was cloned from soybean (Glycine max cultivar Sinpaldal) and shown to convert eriodictyol and naringenin into taxifolin and dihydrokaempferol, respectively. The major flavonoids in this soybean cultivar were found by LC-MS/MS to be kamepferol O-triglycosides and O-diglycosides. Expression of GmF3H and flavonol synthase (GmFLS) was induced by ultraviolet-B (UV-B) irradiation and their expression stimulated accumulation of kaempferol glycones. Thus, GmF3H and GmFLS appear to be key enzymes in the biosynthesis of the UV-protectant, kaempferol.

• Animal cells and systems
• /
• 제1권4호
• /
• pp.637-640
• /
• 1997

Raf-1, a cytoplasmic serine/threonine protein kinase, serves as a central intermediate in many signaling pathways in cell proliferation, differentiation, and development. In this study, we investigated that B-raf, Drosophila homolog of the human c-raf-1, is involved in ultraviolet (UV) responsive events by using hypomorphic mutant $D-raf^{c110}$ and Draf-lacZ transgenic fly. At first, effect of UV damage on the survival of wild-type and $D-raf^{C110}$ strains was examined. In terms of $1/LD_{50}$ value, the relative ratio of UV sensitivities of wild-type versus $D-raf^{C110}$ strain was 1 : 2.2. By using quantitative $\beta$-galactosidase activity analysis, transcriptional activity of the D-raf gene promoter was also examined in UV-irradiated Draf-lacZ transgenic larvae. UV irradiation increased the expression of lacZ reporter gene in Draf-lacZ transgenic fly. However, in $D-raf^{C110}$ strain the transcriptional activity of D-raf gene promoter by UV irradiation was extensively reduced. Results obtained in this study suggest that D-raf plays a role in UV response, leading to better survival of Drosophila to UV damage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.41-44
• /
• 1999

Displacement current was generated in the pressure stimulus and light stimulus. Solution of azobenzene molecules (8A5H) have to character trans-to-cis. Pressure stimulus generate in the pressure and current. light stimulus generate in the displasement current. The Maxwell displacement current measuring technique has been applied for the investigation of azobenzene organic thin films under alternating photoirradiation with ultraviolet(360nm) and visible (450nm) light. The displacement current was generated due to the trans-to-cis photoisomerization by irradiation with ultraviolet light(λ$_1$=360 nm) Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by irradiation with visible light(λ$_2$=450nm). As result, To show twice reaction certainly phase transition in pressure. A first range generated from 24$\AA$$^2$ to 29$\AA$$^2$and second range generated from 20$\AA$$^2$to 24$\AA$$^2$. Also, cetainfy stimulus apper low pressure and high pressure in photoirradiation. To see different every moment phase transition.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.181-187
• /
• 2022

CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na₂SO₃), selenium (Se), cadmium sulfate octahydrate (3CdSO₄·8H₂O), ammonia solution (NH₃·H₂O), and manganese (II) sulfate monohydrate (MnSO₄·H₂O). We obtained CdSe-Mn-C₆₀ nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C₆₀) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C₆₀ nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.116-119
• /
• 1997

We investigated new type non-robbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) irradiation on polyimide (Pl) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV irradiation on Pl surface. We successfully obtained that the pretilt ang1e of NLC is generated about 3 degree in the LC cells by using slanted non-polarized UV irradiation with 70 degree on Pl surface. We consider that the pretilt angle generation for NLC is attributed to interaction between the LC molecular and the PI surface. We conclude that the uniform LC alignment is attributed to anisotropic dispersion force effect due to photo depolymerization of polymer on Pl surface.

• 한국환경보건학회지
• /
• 제32권6호
• /
• pp.566-570
• /
• 2006

Exposure to ultraviolet B(UVB) radiation causes skin inflammation such as pigmentation and the induction of cyclooxygenase-2(COX-2) gene expression. In this study, we investigated the effect of natural extracts from Tea, EGb 761 and Korean red ginseng(KRG), on the pigmentation and expression of COX-1 and COX-2 mRNA in UVB-irradiated C57BL/6 mice. Before UVB irradiation, the skin color was significantly showed the lightening effect by topical application of natural compounds (p<.05). In the case of UVB irradiated mice, we observed a decrease in pigmentation by compounds (p<.05). In irradiated skin, COX-1 mRNA expression is not changed following UVB irradiation, but COX-2 gene increases. Also, natural compounds lowered mRNA levels of COX-2. Therefore, these results suggest that COX-2 mRNA increases by UVB irradiation. Also, Tea, EGb 761 and KRG as a topical application may inhibit skin pigmentation and modulate COX-2 mRNA level.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.90-90
• /
• 2010

We investigated the modification of optical response properties of titanium dioxide (TiO2) coatings on the ceramic water-purification filters by using ultraviolet-visible absorption spectroscopy and X-ray diffraction. The TiO2 coatings were prepared on ceramic substrate by e-beam evaporation method. These amorphous TiO2 were turned into anatase phase by heat treatment at $700^{\circ}C$ for 2 hours. The doping of N atoms into the TiO2 coatings was done by using 70KeV of N＋ ion implantation with the dose of $1.0{\times}1017$ ions/cm2, followed by post-irradiation heat treatment at $550^{\circ}C$ for 2 hours. Methylene blue test of TiO2 coatings to solar irradiation showed that the post-evaporation heated TiO2 was photocatalytic and N-doped TiO2 reacted to the visible part of solar irradiation.