• 제목/요약/키워드: ultrasonic systems

검색결과 573건 처리시간 0.022초

폴리우레탄 코팅장갑내의 DMF 함량 및 피부노출에 대한 평가 (Concentrations of N,N-dimethylformamide in Polyurethane Gloves and Risk Assessment for Dermal Exposures)

  • 박해동;노지원
    • 한국산업보건학회지
    • /
    • 제32권2호
    • /
    • pp.102-110
    • /
    • 2022
  • Objectives: The purpose of this study is to analyze the content of N,N-dimethylformamide(DMF) in polyurethane coated gloves(PU-gloves) and to assess the dermal exposure generated by wearing them. Methods: We analyzed the concentrations of DMF in 12 gloves by EN16778 standard. The samples cut into pieces of about 10 by 10 mm and extracted with methanol in flask in an ultrasonic bath at 70℃. An aliquot of the extract is analyzed with GC-MS. The dose of dermal exposure was calculated by ECETOC TRA consumer 3.1 and compared with derived no effect level(DNEL) for systemic effects due to long term exposure by workers. The extracted amount of DMF by saline solution was compared with that by EN16778 standard. Results: The mean concentration of DMF in PU-gloves was 1,377 mg/kg(range 13~3,948 mg/kg). The concentration of DMF showed significantly differences by packing type, manufacturer, and price(p<0.05). The dose of dermal exposure was 0.0007~0.572 mg/kg body weight/day when the DMF content was 10~4,000 mg/kg. The DMF extracted by saline solution was around 11% for 8 hours. Conclusions: The risk of dermal exposure due to the residual DMF in the PU-gloves was not signifiant. But, the limit of 1,000 mg/kg in PU-gloves can be recommended for international standard and trading systems.

차량용 LiDAR 센서 물리적 신호교란 공격 중심의 실험적 분석과 대응방안 제안 (Experimental Analysis of Physical Signal Jamming Attacks on Automotive LiDAR Sensors and Proposal of Countermeasures)

  • 황지웅;윤요섭;오인수;임강빈
    • 정보보호학회논문지
    • /
    • 제34권2호
    • /
    • pp.217-228
    • /
    • 2024
  • 자율주행 자동차의 안전한 운행을 위해 카메라, RADAR(RAdio Detection And Ranging), 초음파 센서 중 중추적인 역할을 하는 LiDAR(Light Detection And Ranging) 센서는 360도에서 사물을 인식하고 탐지할 수 있다. 하지만 이러한 LiDAR 센서는 레이저를 통해서 거리를 측정하기 때문에 공격자에 노출되기 쉬우며 다양한 보안위협에 직면해있다. 따라서 본 논문에서는 LiDAR 센서를 대상으로 한 여러 가지 보안 위협인 Relay, Spoofing, Replay 공격을 살펴보고 물리적 신호교란(Jamming) 공격의 가능성과 그 영향을 분석하며, 이러한 공격이 자율주행 시스템의 안정성에 미치는 위험을 분석한다. 실험을 통해, 물리적 신호교란 공격이 LiDAR 센서의 거리 측정 능력에 오류를 유발할 수 있음을 보여준다. 개발이 진행 중인 차량 간 통신(Vehicle-to-Vehicle, V2V), 다중 센서 융합과 LiDAR 비정상 데이터 탐지를 통해 이러한 위협에 대한 대응방안과 자율주행 차량의 보안 강화를 위한 기초적인 방향을 제시하고 향후 연구에서 제안된 대응방안의 실제 적용 가능성과 효과를 검증하는 것을 목표로 한다.

서산마애삼존불상의 정밀 손상도 평가와 보존환경 분석 (Detailed Deterioration Evaluation and Analysis of Conservation Environment for the Seosanmaaesamjonbulsang (Rock-carved Triad Buddha in Seosan), Korea)

  • 이선명;이찬희;김지영
    • 보존과학회지
    • /
    • 제26권3호
    • /
    • pp.277-294
    • /
    • 2010
  • 서산마애삼존불상(국보 제84호)을 이루는 암석은 담회색을 띠는 중립질 흑운모 화강암이며 부분적으로 페그마타이트 및 석영 세맥이 관찰된다. 삼존불이 조각된 암반은 전면에 걸쳐 불규칙적인 불연속면의 발달로 크기와 모양이 다양한 암괴를 형성하고 있으며, 암반 사면의 안정성이 취약한 것으로 나타났다. 훼손도 진단 결과, 수직 및 수평 절리가 밀집된 부분을 중심으로 물리적 풍화와 표면변색에 의해 훼손이 가중된 상태를 보인다. 이를 삼존불의 전체 면적대비 훼손율 42.7%에 비교했을 때, 물리적 풍화는 9.6%, 변색은 33.1%로 변색에서 높은 점유율을 보였다. 초음파 측정 결과, 삼존불은 전반적으로 심한 풍화단계(HW)에 있으며 삼존불에 발달하고 있는 불규칙한 절리계를 따라 약 1,000m/s의 저속도대가 분포하여 구성 암석이 약화된 것을 알 수 있다. 삼존불 보호각 내외부의 상대습도는 사계절 모두 평균 70% 이상을 기록하며, 95% 이상의 고습도 영역에서 높은 빈도수를 나타냈다. 이 고습도 환경은 강수와 함께 암석 표면에 결로를 발생시켜 수분을 공급하며 수분의 침투와 함수율이 높은 균열 및 절리대를 따라 물리적, 화학적, 생물학적 풍화를 진전시키는 것으로 사료된다. 따라서 삼존불의 과학적 보존을 위해 수분문제를 비롯하여 지속적인 보존환경 모니터링을 통한 환경제어 방안이 필요할 것으로 판단된다.

A Study on Improvement of Parking Guidance System to Low-Power Operation for Green Building

  • 이정준;오영태;이철기;윤일수;정상호
    • 한국ITS학회 논문지
    • /
    • 제10권3호
    • /
    • pp.1-8
    • /
    • 2011
  • 주차정보시스템은 주차 대기시간을 줄이고 운전자의 편의를 증진시킬 수 있지만, 다수의 검지기, 표출장치, 제어장치 등을 포함하는 특성에 기인하여 항구적인 전력을 소비하는 특징을 갖는다. 근래에 국내외에서 환경 친화적 그린 빌딩을 위한 저 전력 소비 형 주차정보시스템의 요구가 증대되고 있다. 본 논문에서는 가상 빌딩의 주차장을 대상으로, 소비전력 저감을 특징으로 하는 주차정보시스템을 설계하였다. 본 설계를 위한 주차검지기로는 기 상용화된 배터리방식 주차 검지기인 무선루프식검지기와 지자기방식 검지기를 적용하고, 시스템 구성 및 통신 네트워크, 운전자 정보서비스 시나리오, 배터리 수명 평준화 등에 대한 설계를 진행하였다. 이어서, 설계된 주차정보시스템의 운영 소비전력을 추정하고 이를 종래의 일반적인 초음파방식 시스템의 동작 소비전력과 비교 하였다. 또한, 주기적 배터리 교체비용을 고려한 전력 유지비용을 환산하여 비교하였다. 7년의 배터리 교체주기를 기준으로 하였을 때, 설계된 시스템의 운영 소비전력은 기존 초음파센서 기반 시스템의 13% 수준으로, 전력 운영비용 환산 값은 기존시스템과 유사한 수준인 94.9%로 추정되었다. 본 연구의 시스템은 소비전력의 괄목할 만 한 경감에 따라, CO2발생의 저감을 기대할 수 있다.

치과대학 임상 시뮬레이션 실습실 치과용 유니트 수계의 세균 오염도 조사 (Bacterial Contamination of Dental Unit Water Systems in a Student Clinical Simulation Laboratory of College of Dentistry)

  • 윤혜영;이시영
    • 치위생과학회지
    • /
    • 제15권2호
    • /
    • pp.232-237
    • /
    • 2015
  • 이 연구는 강릉원주대학교 치과대학 학생들의 임상실습을 위해 사용되고 있는 DCU에서 배출되는 물 속 종속영양세균의 수준을 평가하면서 사용빈도에 따른 세균 오염수준의 차이를 확인하고 기회 감염성 병원균의 존재를 분자생물학적 방법을 사용하여 확인하였다. 임상 실습실에서 사용되는 DCU 36개를 대상으로 초음파치석제거기에서 물 시료를 수집하여 평균 CFU/ml를 조사하고 초음파치석제거기의 한달 사용빈도에 따라 DCU를 세 집단으로 분류하여 세균오염수준을 비교하였다. 또한 수집한 물 시료에서 세균의 genomic DNA를 추출한 후 PCR 분석을 통해 기회감염성 병원균의 존재를 확인한 결과는 다음과 같다. 학생 실습에 사용한 DCU에서 수집한 물 시료의 평균 종속영양세균수준은 16,095 CFU/ml로 ADA에서 권장하는 200 CFU/ml 이하의 수준에 적합하지 않은 것을 확인하였다. 초음파 치석제거기의 한 달 사용빈도에 따라 3집단으로 나누어 CFU/ml를 조사하였을 때, 초음파치석제거기를 한 달에 1번 이상 3번 미만 사용한 DCU에서 평균 CFU/ml가 20,070 CFU/ml로 가장 높게 나타났으며, 3번 이상 사용한 유니트는 CFU/ml 평균이 8,420 CFU/ml로 가장 적게 나타났다. 3개군의 CFU/ml 차이는 통계학적으로 유의성이 있는 것을 보여주었고(p<0.05), 그 중 사용빈도가 가장 높은 군에서 유의하게 낮은 CFU/ml를 보여주었다. 치과에서 사용하는 DCU에 존재하는 기회감염성 병원균이 학생실습에 사용하는 DCU에서도 분리되었다. 36개의 genomic DNA 시료 중 1개의 시료에서 Pseudomonas species가 검출되었고, 2개의 시료에서 비결핵성 Mycobacterium species가 검출되었다. 따라서 학생실습용으로 사용되는 DCU는 학생들과 대상자에게 잠재적 감염의 원인이 될 수 있으며, 실습 전 학생들의 보호장비 착용과 실습 후 수관관리가 필요하다.

Vision Tracking을 이용한 주행 차량의 교통정보 산출 기법 (Traffic Data Calculation Solution for Moving Vehicles using Vision Tracking)

  • 박영기;임상일;조익현;차재상
    • 한국ITS학회 논문지
    • /
    • 제19권5호
    • /
    • pp.97-105
    • /
    • 2020
  • 최근 스마트시티 구축을 위하여 지능형 도로인프라를 이용한 차량의 교통정보를 취득하고, 이를 효율적으로 관리하기 위한 기술의 개발이 요구되고 있다. 그동안 도로의 교통정보를 분석하기 위해서는 루프 검지기, 초음파 검지기, 영상식 검지기 등의 다양한 기술들이 활용되고 있었다. 그런데, 이러한 종래의 기술들은 도로내에서 이동하는 차량을 대상으로 교통정보 DB 구축을 위해 필요한 교통 밀도, 대기행렬의 길이등 다양한 교통 DB의 수집에 어려움이 있었다. 따라서, 본 논문에서는 도로위에 지능형 CCTV등 카메라 인프라를 기본으로 구축되는 스마트 시티를 가정하여 도로의 CCTV카메라를 이용하여 도로 CCTV의 Vision Tracking을 이용한 주행차량의 교통DB산출하는 솔루션을 제시하고, 이에 대한 모의실험과 기초성능 검증을 행하였다. 본 논문에서 제시한 솔루션은 일반론으로 발전시켜야할 숙제는 여전히 남아있지만, 가변하는 스마트시티 도로환경속에서 도로부착형 CCTV카메라 이동차량 환경을 반영한 새로운 지능형 교통DB산출솔루션으로 관련 분야에서 유용하게 활용될수 있을것으로 기대된다.

사각영역이 없는 전방향 음원인식을 위한 QRAS 기반의 알고리즘 (QRAS-based Algorithm for Omnidirectional Sound Source Determination Without Blind Spots)

  • 김영언;박구만
    • 방송공학회논문지
    • /
    • 제27권1호
    • /
    • pp.91-103
    • /
    • 2022
  • 음원의 음량, 방향 및 음원까지의 거리와 같은 음원의 특성을 인식하는 것은 자율주행차, 로봇 시스템, AI 스피커 등 무인 시스템에서 중요한 기술 중의 하나이다. 음원의 방향이나 거리를 인식하는 방법은 레이다, 라이더, 초음파 및 고주파와 소리를 이용하는 방법이 있다. 그러나 이러한 방법은 신호를 발신하여야 하며, 장애물에 의한 비가시 영역에서 발생하는 음원은 정확하게 인식할 수 없다. 본 논문에서는 비가시 영역을 포함한 주변에서 발생하는 음원의 음량, 방향 및 음원까지의 거리를 인식하는 방법으로 가청 주파수 대역의 소리를 검출하여 인식하는 방법을 구현하고 평가하였다. 음원을 인식하기 위하여 주로 사용하는 교차형 기반의 음원인식 알고리즘은 음원의 음량과 방향을 인식할 수 있으나 사각영역이 발생하는 문제가 있다. 뿐만아니라 이 알고리즘은 음원까지의 거리를 인식할 수 없다는 제약이 있다. 이러한 기존 방법의 한계를 탈피하기 위하여, 본 논문에서는 교차형 기반의 알고리즘보다 더 발전된 직사각형 기법을 사용한 QRAS 기반의 알고리즘으로 음원의 음량, 방향 및 음원까지의 거리를 인식하여 음원의 특성을 파악할 수 있는 음원인식 알고리즘을 제안한다. 전방향 음원인식을 위한 QRAS 기반의 알고리즘은 직사각형으로 배치된 4개의 음향센서에 의하여 도출되는 6쌍의 음향 도착 시간차를 사용한다. QRAS 기반의 알고리즘은 기존 교차형 기반의 알고리즘으로 음원을 인식할 때 발생하는 사각영역과 같은 문제점을 해결할 수 있으며, 음원까지의 거리도 인식할 수 있다. 실험을 통하여 제안된 전방향 음원 인식을 위한 QRAS 기반의 알고리즘은 사각영역없이 음원의 음량, 방향 및 음원까지의 거리를 인식할 수 있음을 확인하였다.

국내 인·허가 온열의료기기 기술 현황 조사 및 분석 (The Current State of Intended Equipment for Heating in Medical Use Based on Domestic Licensed Medical Devices)

  • 임수란;박정환;박지연;김송이
    • Korean Journal of Acupuncture
    • /
    • 제40권4호
    • /
    • pp.156-168
    • /
    • 2023
  • Objectives : This study aimed to determine the status of thermal stimulation devices approved in Korea for medical applications over the past 10 years, and based on this, to obtain insight for future thermal treatment in Korean medical institutions. Methods : We searched the item classification list entitled "Regulations on Medical Device Items and Rating by Item" from the Ministry of Food and Drug Safety Notice No. 2021-24, 2021 (Enforced March 19, 2021; www.mfds.go.kr) for individually licensed heaters using the terms "heat" and "heating". Results : We identified 17 items of thermal stimulation product group, of which 1,308 devices were licensed by February 4, 2022, and 53.2% of them (n=696) were devices with valid permits for distribution in Korea. Among the licensed devices, heating pad systems under/overlay (electric, home use) were approved the most, but combinational stimulator (for medical use, home use; Grade 2) accounted for the highest percentage among the current valid permission. Moxibustion apparatuses were licensed separately for electrical use and non-electrical use, and occupied a low percentage of the total devices. We analyzed 307 devices that were accompanied by technical documents and found that the heat sources were wires in 145 (47.2%), infrared rays in 44 (14.3%) and ultrasonic waves in 42 (13.7%) devices. Most (83.1%) devices were used for pain relief, while other applications included beauty, cancer treatment, maintenance of infant body temperature, and healing fractures. Conclusions : Thermal stimulation devices accounted for about 0.9% of all medical devices, and among them, combinational stimulators and heating pad systems under/overlay had the most valid permits. Thermal stimulation devices using heating wires and infrared rays were the most prevalent, and most were used to relieve pain. In order to develop a range of thermal stimulation devices that can be utilized in Korean medical institutions, it is imperative that they have potential applications beyond pain management, addressing various medical purposes. To achieve this, foundational research is necessary to effectively apply diverse heat sources based on medical objectives.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

All-in-one 접착제에서 초음파진동이 법랑질과 상아질의 결합강도와 레진침투에 미치는 영향 (EFFECT OF ULTRASONIC VIBRATION ON ENAMEL AND DENTIN BOND STRENGTH AND RESIN INFILTRATION IN ALL-IN-ONE ADHESIVE SYSTEMS)

  • 이범의;장기택;이상훈;김종철;한세현
    • 대한소아치과학회지
    • /
    • 제31권1호
    • /
    • pp.66-78
    • /
    • 2004
  • 초기의 접착 시스템은 여러 단계의 술식을 필요로 하였으며 술자의 기술과 재료의 성질에 크게 좌우되었으나 최근 산부식, priming, adhesive를 한번에 적용할 수 있는 all-in-one adhesive system이 등장하였다. 치과에서의 vibration의 이용은 치석의 제거 및 접착제의 점도를 낮추는데 이용되어왔으며 vibration은 접착제의 흐름성을 향상시켜 film thickness를 낮추어 수복물 주위의 미세누출을 줄이는데 도움을 준다. 이에 저자들은 all-in-one adhesive system에서 vibration이 법랑질과 상아질의 접착강도와 레진침투에 미치는 효과를 알아보고자 하였다. 법랑질 시편은 발거 후 실온에서 0.1% thymol 용액에서 보관된 30개의 건전한 사람의 대구치를 무작위로 10개씩 세군으로 나누고 근원심 방향으로 두 부분으로 분리하여 각각은 같은 접착제를 사용하고 초음파진동여부를 다르게 하였고, 아크릴레진을 이용하여 직경 1-inch의 PVC관에 매몰한 후 협설면이 아크릴봉과 동일한 높이가 되도록 220-, 600-grit 연마지로 순차적으로 연마하였고 군당 10개씩 여섯 군으로 분류하였다. 1군과 2군은 Prompt L-Pop(3M-ESPE, Seefeld, Germany), 3군과 4군은 One-Up Bond F(Tokuyama Corp., Tokyo, Japan), 5군과 6군은 AQ bond(Sun Medical Co., Kyoto, Japan)를 제조사의 지시에 따라 도포하였다. 2군, 4군, 6군은 초음파 치석제거기를 이용하여 치면에 대고 15초간 진동을 가한 후 광중합하였다. 상아질 시편은 치관부 법랑질을 제거한 후 상아질면을 아크릴 봉과 동일한 높이가 되도록 하고 법랑질 시편과 동일하게 처리하였다. 이후 직경 2mm, 높이 3mm의 Teflon mold(Ultradent, U.S.A.)를 이용하여 복합레진을 충전한 후 40초씩 두 번에 나누어 광중합한 후 24시간동안 실온에서 증류수에 보관하였다. 열순환 시행한 후, 만능측정기(Instron 4465)로 전단결합강도를 측정하였으며 Resin tag의 양상을 비교하기 위해 각 군의 시편의 치질을 완전히 용해시킨 후 표면을 주사전자현미경사진으로 관찰하여 다음과 같은 결과를 얻었다. 1 법랑질에서 초음파 진동을 가한 군(2, 4, 6군)은 가하지 않은 군(1, 3, 5군)에 비해 평균 전단결합강도가 높게 나타났다. 그 차이는 Ad bond 군을 제외하고 통계적으로 유의하였다(p<0.05). 2. 상아질에서 초음파 진동을 가한 군(2, 4, 6군)은 가하지 않은 군(1, 3, 5군)에 비해 평균 전단결합강도가 높게 나타났다. 그러나 그 차이는 One-Up Bond F군을 제외하고는 통계적으로 유의한 차이가 없었다. 3. 전자 현미경 관찰에서 초음파 진동을 가한 군에서 더 많은 법랑질의 소실과 상아질에서 resin tag의 길이가 길었고 lateral branch의 수도 많이 관찰되었다.

  • PDF