• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.988-993
• /
• 2004

Luminescence characteristics of Ag-doped ZnO as the quantum dot materials to increasing the efficiency on dye-sensitized solar cells (DSC) have been studied. Ag doped ZnO powder was produced by the self-sustaining combustion process using ultrasonic spraying heating method. Luminescence wavelength region of the ZnO by Ag doping was shifted to longer wavelength. Tn the case of the Ag doped ZnO powder, broad luminescence spectrum centered on 600nm was observed. On the other hand, we compared PL data of RTA treated ZnO:Ag film at various temperatures because the front electrode of solar cell was in need of the sintering process. In XRD and PL data for RTA treated film at the 500$^{\circ}C$ showed good property. And, it was found that the grain size wasn't growing but only optical property was changed. According to the result of XRD, PL, absorption, emission spectrum and DV-X${\alpha}$ used in theoretical calculation, it is considered to be possible to use Ag doped ZnO as quantum dot material for improving DSC efficiency.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.735-739
• /
• 2002

$(Y,Gd)BO_3$: Eu, $Zn_2$$SiO_4$ : Mn and $BaMgAl_{10}$ $O_{17}$ : Eu phosphors used in PDP were continuously irradiated by vacuum ultra violet generated from the penning gas (96%Ar+4%Xe) discharge and then the change of emitting intensity with time was investigated. The brightness of these phosphors decreased exponentially with VUV excitation time. The experimental data showed that the degradation rate increased in the order of $Zn_2$$SiO_4$ : Mn>(Y,Gd)$BO_3$: Eu>$BaMgAl_{10}$ $O_{17}$ : Eu phosphor. This different degradation property of phosphors was interpreted in terms of brightness saturation and stability against VUV irradiation. It was found that the degradation property of $(Y,Gd)BO_3$ : Eu red phosphor synthesized by ultrasonic thermal spray was superior to commercial phosphor.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2022

In this investigation, Bi₂MoO₆ deposited graphene nanocomposite (BMG) was synthesized using a simple microwave assisted hydrothermal synthesis method. The synthesized BMG nanocomposite was characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy with energy dispersive X-ray analysis, and photocurrent analysis. The study revealed that the catalysts prepared have high crystalline nature, enhanced light responsive property, high catalytic activity, and good stability. XRD results of BMG composite exhibit a koechlinite phase of Bi₂MoO₆. The surface property is shown by SEM and TEM, which confirmed a homogenous composition in the bulk particles of Bi₂MoO₆ and nanosheets of graphene. The catalytic behavior was investigated by the decomposition of Rhodamine B as a standard dye. The results exhibit excellent yields of product derivatives at mild conditions under ultrasonic/visible light-medium. Approximately 1.6-times-enhanced sono-photocatalytic activity was observed by introduction of Bi₂MoO₆ on graphene nanosheet compared with control sample P25 during 50 min test.

• 지구물리와물리탐사
• /
• 제16권4호
• /
• pp.250-256
• /
• 2013

암석의 강도 및 건전성 평가에 있어 전단파를 사용하는 것이 압축파에 비해 높은 신뢰성과 정확도를 제공한다. 암편의 $V_S$ 도출을 위해 양단자유공진주기법을 수행할 시 비틀림파에 의한 공진주파수를 구분해야 하나 쉽지 않은 상황이 자주 발생한다. 또한, 초음파속도기법에서는 P파에 비해 S파 도달 시점이 모호하여 암편의 $V_S$를 객관적으로 산출하는 것이 쉽지 않다. 반면에 초음파 속도법을 통해서는 $V_P$ 값을, 양단자유공진주기법을 통해서는 $V_L$ 값을 안정적으로 획득할 수 있는데 탄성계수간의 관계식을 이용하여 포아송비를 계산할 수 있게 되며 $V_S$ 값을 산출할 수 있다. 알루미늄, 모노캐스트 등 다른 재질과 다른 길이를 가지는 모형 시편을 이용하여 검증 실험을 수행하였고 국내 여러 지역에서 채취한 암석시편에 대해서 제안된 방법을 적용하여 본 결과 제안된 방법의 유용함을 확인할 수 있었다.

• 보존과학회지
• /
• 제27권4호
• /
• pp.395-401
• /
• 2011

석조 문화재의 보존을 위한 효과적인 처리 방법으로 제안되는 가압 함침 방법으로 methyl methacrylate (MMA), MMA-butyl acrylate (PMB73) 공조성물 및 MMA-vinyl trimethoxy silane (PMV5) 공조성물을 사용하여 사암 및 화강암에 함침 처리한 후 물리 화학적 특성을 평가하였다. 화강암과 비교하여 사암의 경우 함침율이 3.2 - 3.7 wt%로 높은 값을 보였고 고압 반응기 내에 감압 공정 도입 시 32%의 함침율 증가를 나타내었다. 물리화학적 특성인 발수성, 휨강도, 충격특성 및 초음파 속도 등도 화강암보다 사암에 대해 아크릴계 가압함침 처리제의 효과가 두드러지게 나타남을 알 수 있었고, 이는 사암의 공극이 많아 단량체 함침율이 크기 때문으로 해석할 수 있었다. 아크릴계 처리제별 사암에 대한 충격파괴 에너지는 PMMA의 경우 1.22 J, PMB73은 1.84 J, 그리고 PMV5의 경우 2.8 J을 나타내었다. 충격 특성에서 무기 특성을 개선한 PMV5가 최적의 성질을 나타내는 것은 아크릴계 처리제의 분자 구조보다는 처리제의 무기 친화 특성이 석재의 충격 특성에 더 많은 영향을 주기 때문으로 해석할 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.463-469
• /
• 2003

과실은 재배기술, 재배환경의 영향으로 형상, 색택, 병충해로 인한 상해 정도가 다르게 나타나기 때문에 상품성이 매우 다양하게 결정된다. 또한 수확, 저장, 포장, 수송, 상하차 등 유통과정에서 기계적 손상이 발생할 수 있으며 유통기간이 길어짐에 따라 호흡 및 증산작용 등과 같은 생리적 작용으로 인하여 부패 및 변질이 발생하며 이러한 유통과정 중에서 발생하는 과실의 품질저하가 상당한 수준에 이르고 있으나, 이에 대한 관심은 매우 낮은 실정이다. 또한, 대부분의 청과물은 수확 후 소비되기까지 장기간의 저장으로 품질 변화가 발생할 수도 있다. (중략)

• 한국인쇄학회지
• /
• 제15권1호
• /
• pp.57-69
• /
• 1997

The field of printing to use pressurized ink using screen gossamer that is called screen printing. Existing cleaning solvents for the screen printing are the organic solvents containing aromatic compounds and stench. Also, Cleaning method of screen printing are for the most part mixed cleaning method of dipping and polish. In this study, we measured the cleaning efficiency by gravimetric analysis and the property change of gossamer by image analyzer using existing cleaning solvent. Also, we investigated a new cleaning process showing excellent cleaning efficiency using the ultrasonic and vibration cleaning method instead of the exsiting mixed cleaning method.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.1-4
• /
• 1997

Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. besides, Cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.177-182
• /
• 1995

Since one property(i.e. coarseness, orientation, regularity, granularity etc.) of ultrasound liver images was not sufficiently enough to classify the characteristics of livers, we used the multi-feature vectors from ultrasound images to diagnose the liver disease. The proposed classifier, which uses the multi-feature vectors and Bayes decision rule, performed well for the classification of normal, fat and cirrhosis liver. In our simulation, we used the Battacharyya distance and Hotelling Trace Criterion to select the best multi-feature vectors for the classifier and obtained less classification errors than other methods using single feature vector.