• 제목/요약/키워드: ultra-structure

검색결과 874건 처리시간 0.027초

Ultra-small Marker Beacon Antenna with a Wide Frequency Tuneable Capacitive Plate

  • Park, Ju-Derk;Choi, Byeong-Cheol;Kim, Nam;Jung, Young-Bae
    • ETRI Journal
    • /
    • 제38권5호
    • /
    • pp.879-884
    • /
    • 2016
  • In this paper, an ultra-small marker beacon antenna operated in the VHF-band is proposed. This antenna has a modified linear IFA structure with a lumped capacitor and a capacitive plate for frequency tuning and impedance matching. The capacitive plate is directly connected to the end of a linear radiator and is separated from the antenna ground by 1 mm. The main operating frequency is mainly controlled by the size and dielectric constant of the capacitive plate. The lumped capacitor is useful for fine frequency tuning. Using the proposed structure, an ultra-small marker beacon antenna can be realized with a length of 0.04 ${\lambda}_0$.

마이크로머신 기술로 제작한 자동차 프런트엔드용 초광대역 빔성형 네트워크 (Micromachined ultra-wideband beamforming network for automotive radar front ends)

  • ;;김정무;김용권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.2386-2388
    • /
    • 2005
  • As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.

  • PDF

유한요소법을 이용한 초정밀 미동스테이지 설계에 관한 연구(I) (A Study on the Design of Ultra Precision Positioning Apparatus using FEM (I))

  • 김재열;윤성운;김항우;한재호;곽이구
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.190-194
    • /
    • 2001
  • Because, Piezo-electric transducer(PZT) transform electric energy into mechanical energy, it is a adequate material for positioning control and force control, take excellent properties as actuator with high speed and high performance. Recently, researches of ultra precision positioning using this PZT are advanced in. In this paper, we use a actuator of PZT, design a positioning apparatus with ultra precision position apparatus as hinge structure. Because of this purpose, before, we were confirmed in control properties of ultra precision stage by FEM method.

  • PDF

기능성 초박막을 이용한 Electret 소자의 제작과 전기물성에 관한 연구-LB초박막 TCNQ의 전기전도 특성- (A Study on the Electrical Properties and Fabrication of Electret Element by Functional Ultra Thin Films -Electrical conduction in LB Ultra Thin Films of TCNQ-)

  • 권영수;박만철;이원재;홍언식;강도열
    • 대한전기학회논문지
    • /
    • 제40권5호
    • /
    • pp.489-495
    • /
    • 1991
  • In this paper, we study the electrical conduction mechanism in Langmuir-Blodgett(LB) ultra thin films for which the LB device has a metal/LB films(TCNQ)/metal sandwich structure. Our experiments show that the current at the LB device does not depend on the temperature at below 0 C. This phenomena confirm that the electrical conduction current is a tunnel current inherent to ultra thin films. However, the current depends upon the temperature near the room temperature. This phenomena indicates the electeical conduction current is a Schottky current inherent to ultra thin films.

  • PDF

미세기포 세척장비를 이용한 도로시설물 염화칼슘의 제거 (Removal of calcium chloride in road structure using ultra-fine bubble washing machine)

  • 박일건;이준형;박형준;김현진;김흥래;조일형
    • 한국응용과학기술학회지
    • /
    • 제36권4호
    • /
    • pp.1281-1289
    • /
    • 2019
  • 본 연구는 도로시설물의 염화칼슘 제거를 위한 미세기포 세척장비의 최적 운용조건에 대하여 성능평가를 수행하였다. 실험에 사용된 미세기포의 직경은 196.6±100.6nm에 1.36×108개/ml의 농도를 나타낸다. 세척장비의 분사장치에 대한 실험 성능결과, 100bar의 분사압력에서 100cm, 150cm 분사거리에 약 93%, 91%의 세척효율이 나타나는 것으로 확인되었다. 미세기포 생성(순환)횟수를 2-6회로 증가시킴에 따라 최소 1%에서 7%까지 염화물 제거율이 높아짐을 확인하였다. 미세기포 생성 공기유량을 4 ml/min에서 0.5 ml/min으로 낮춤에 따라 세척효율이 최대 30%까지 증가하는 것이 확인되었다. 일반 상수도와 미세기포의 세척효율은 미세기포가 일반상수도 보다 세척효율이 25% 높게 나타났다.

포크 모양의 급전 구조를 갖는 변형된 마름모 슬롯 UWB 안테나 설계 및 제작 (A Design and Manufacture of Modified Rhombus Slot UWB antenna with Fork-shaped-Feedline)

  • 하성재;윤중한
    • 한국정보통신학회논문지
    • /
    • 제20권7호
    • /
    • pp.1221-1228
    • /
    • 2016
  • 본 논문에서는 포크 모양의 급전 구조를 갖는 변형된 마름모 슬롯 UWB(Ultra Wide Band) 안테나를 제안하였다. 제안된 안테나는 초광대역 특성을 얻기 위해서 마름모 형태의 슬롯 구조와 포크 모양의 급전 구조로 설계하였다. 변형된 마름모 구조는 기존 마름모 구조에서 상단과 하단 영역이 제거하여 설계하였다. 제안된 안테나는 $34mm(W_1){\times}34mm(L_1){\times}1mm(t)$의 유전율 4.4인 FR-4 유전체 기판 위에 설계되었으며 전체 슬롯 크기는 $30mm(W_2){\times}16.75mm(L_3+L_4)$을 갖도록 설계하였다. 각 파라메타에 대한 시뮬레이션을 진행하여 최적화 수치를 얻었다. 제작 및 측정 결과로부터 제안된 안테나의 반사손실 특성은 3.1 ~ 10.6 GHz UWB 대역에서 -10dB 이하의 값을 갖으며 또한 측정된 이득과 방사패턴 특성 결과를 얻었다.

포크 모양의 급전 구조를 갖는 변형된 마름모 슬롯 UWB 안테나 설계 및 제작 (A Design and Manufacture of Modified Rhombus Slot UWB antenna with Fork-shaped-Fed)

  • 김종화;김기래;윤중한
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.630-632
    • /
    • 2016
  • 본 논문에서는 포크 모양의 급전 구조를 갖는 변형된 마름모 슬롯 UWB(Ultra Wide Band) 안테나를 제안한다. 제안된 안테나는 마름모 형태의 슬롯 구조로부터 UWB 통신에 적합한 초광대역 특성(3.1~10.6 GHz)을 갖도록 상단과 하단 영역이 제거된 변형된 마름모 구조를 갖도록 설계하였으며 급전구조는 광대역 특성을 갖는 방법으로서 포크 모양의 구조를 사용하였다. 제안된 안테나는 $34mm(W1){\times}34mm(L1){\times}1mm(t)$의 유전율 4.4인 FR-4 유전체 기판 크기에 $30mm(W2){\times}16.75mm(L3+L4)$ 슬롯 크기를 갖도록 설계되었다. 최적화 과정을 거친 후, 제안된 안테나는 제작 및 측정되었다. 측정결과, 제안된 안테나의 반사손실 특성은 3.1 ~ 10.6 GHz 대역에서 -10dB를 기준을 만족하였으며 동작대역에서 측정된 이득과 방사패턴 특성 결과를 얻었다.

  • PDF

극소형 LED 패키지의 개발과 불량 유형의 분석 (Development of Ultra-compact LED Package and Analysis of Defect Type)

  • 이종찬
    • 한국융합학회논문지
    • /
    • 제8권12호
    • /
    • pp.23-29
    • /
    • 2017
  • 본 논문은 1mm 이하의 극소형 패키지 개발을 위한 금형 기술을 소개한다. 또한 이 금형 기술을 사용하여 산출된 결과들의 오류 패턴을 분석한다. 기존의 극소형 금형 구조는 일체형이었는데 EDM의 표면이 거칠어 오류율을 증가시키는 원인이 되었다. 이 원인으로 인해 금형의 크기를 더 줄이는데 방해요소로 작용하였다. 이에 반해 제안하는 금형기술은 기존의 일체형 방식에서 벋어나 조립식 방법을 사용하여 일체식의 한계를 극복하고자 한다. 또한 새로 제안된 금형 구조를 이용해 산출한 결과에 결함 패턴을 분류하고, 각 패턴의 발생 확률을 분석하여 검출기를 개발하려는 기초 자료로 사용하려 한다.

Metal-insulator Transition in $(Sr_{0.75},\;La_{0.25})TiO_3$ Ultra-thin Films

  • Choi, Jae-Du;Choi, Eui-Young;Lee, Yun-Sang;Lee, Jai-Chan
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 추계학술발표대회
    • /
    • pp.19.2-19.2
    • /
    • 2011
  • The $(Sr_{0.75},\;La_{0.25})TiO_3$ (SLTO) ultra-thin films with various thicknesses have been grown on Ti-O terminated $SrTiO_3$(100) substrate using Laser-Molecular Beam Epitaxy (Laser MBE). By monitoring the in-situ specular spot intensity oscillation of reflection high energy electron diffraction (RHEED), we controlled the layer-by-layer film growth. The film structure and topography were verified by atomic force microscopy (AFM) and high resolution thin film x-ray diffraction by the synchrotron x-ray radiation. We have also investigated the electronic band structure using x-ray absorption spectroscopy (XAS). The ultra thin SLTO film exhibits thickness driven metal-insulator transition around 8 unit cell thickness when the film thickness progressively reduced to 2 unit cell. The SLTO thin films with an insulating character showed band splitting in Ti $L_3-L_2$ edge XAS spectrum which is attributed to Ti 3d band splitting. This narrow d band splitting could drive the metal-insulator transition along with Anderson Localization. In optical conductivity, we have found the spectral weight transfer from coherent part to incoherent part when the film thickness was reduced. This result indicates the possibility of enhanced electron correlation in ultra thin films.

  • PDF