• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.539-540
• /
• 2008

This paper presents an ultra-wideband (UWB) CMOS low noise amplifier (LNA) topology that operates in 3.1-10.6GHz band. The common gate structure provides wideband input matching and flattens the passband gain. The proposed UWB amplifier is implemented in 0.18 um CMOS technology for lower band operation mode. Simulation shows a minimum NF of 2.35 dB, a power gain of $18.3{\sim}20\;dB$, better than -10 dB of input and output matching, while consuming 16.4 mW.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.754-759
• /
• 2016

A transformer feedback low-noise amplifier (LNA) is implemented in a standard $0.18{\mu}m$ CMOS process, which exploits drain-to-gate transformer feedback technique for wideband input matching and operates across entire 3~5 GHz ultra-wideband (UWB). The proposed LNA achieves power gain above 9.5 dB, input return loss less than 15.0 dB, and noise figure below 4.8 dB, while consuming 8.1 mW from a 1.8-V supply. To the authors' knowledge, drain-to-gate transformer feedback for wideband input matching cascode LNA is the first adopted technique for UWB application.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.214-216
• /
• 2005

The PAL (Pohang Accelerator Laboratory) is persuading to construct a SASE-XFEL facility (PAL XFEL) that supplies coherent X-rays. The bright and stable electron beam is essential for the PAL XEL. The electron beams has to have an emittance of 1.0 mm-mrad, a peak current of 3 kA, and a low energy spread of 1.0 MeV. In order to provide reasonably stable SASE output, the RF stability of 0.02% rms is required for both RF phase and amplitude. This is a technologically challenging issue for PAL XFEL. An inverter technology is to be applied to charge the PFN of a new modulator. Therefore, a new inverter system should provide very stable charging performances. This paper presents the development of an ultra stable klystron-modulator with an inverter power supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.220-226
• /
• 2004

Ultra-wideband(UWB) communication applications is a recent innovation due to high transmission rate and low power emission. Therefore, it is important to research UWB signal's characteristics and modulation methods to apply to various UWB communication technologies. In this paper the characteristics of Gaussian monopulse which is capable of using UWB communication was analyzed and we compared the performance of PPM and PAM modulation method. Also we analyzed the interference effect of QPSK system with different center frequencies in the present of various UWB noises and simulated simple UWB transceiver system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.170-173
• /
• 2010

최근 진보된 무선 통신 기술과 발전된 의료 기술로 인하여 u-Health의 핵심 기술인 WBAN에 대한 연구가 활발히 진행되고 있다. 인체에 이식 가능한 WBAN 장치는 전원 공급에 제한이 있으므로 소비전력을 최소화하기 위한 MAC 프로토콜이 필요하다. 본 논문은 WBAN 장치의 다양한 무선 통신 특성을 적용한 시뮬레이터에 관한 것으로 MICS 대역의 채널 특성을 적용하였고, 데이터의 신뢰성과 에너지 효율성을 향상시키기 위해 가변 패킷 및 비트맵 기반의 패킷 블록 전송기법을 적용한 MAC 프로토콜을 사용한다.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.17-22
• /
• 2013

The excellent beam quality of high power fiber lasers are commonly used for remote welding applications in body job applications. The Welding speed and productivity is unmatched with any other welding technology including resistance spot welding or traditional laser welding. High tooling cost for clamping and bulky safety enclosures are obstacles which are limiting the use. With the newly developed Laser stitch welding gun we have an integrated clamping in the process tool and the laser welding is shielded in a way that no external enclosure is needed. Operation of this laser welding gun is comparable with resistance spot welding but 2-times faster. Laser stitch welding is faster than spot welding and slower than remote welding. It is a laser welding tool with all the laser benefits like welding of short flanges, weld ability of Ultra High Strength steel, 3 layers welding and Aluminium welding. Together with low energy consumption and minimum operation cost of IPG fiber laser it is a new and sharp tool for economic car body assembly.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1398-1400
• /
• 2002

A new PLF-BLU (Plastic Light Fiber-Back Light Unit) using side glowing light fiber rods array for the 42" LCD TV display has been evelopedd. The light fibers were 14mm in diameter and 50cm long pure transparent acrylic rods of 1.49 refractive index. Fine seratees were made on the flat side of rod. extremely bright incandscent light from lamp fed into the fiber si scattered at scratches then emerges through the surface of rod. A typical PLF-BLU system consists of 24 PLFs produced side glow of brightness of 4,500cd/㎡ to 6,500cd/㎡. New PLF-BLU is proved to be a BLU of rigid, bright, no heat generation, and low power consumption, hence a prospective BLU system for very and/or ultra large size TVs. A new LED-PLF-BLU system considered to be a revolutionary to break-through of the BLU technologies has also been developed, and is decribed briefly.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.34-39
• /
• 2008

An RF front-end dual-conversion receiver for $3{\sim}5\;GHz$ MB-OFDM UWB systems is implemented in $0.18\;{\mu}m$ CMOS technology. The receiver includes a two-stage UWB LNA, an RF mixer, an IF I/Q mixer, and a frequency synthesizer. The proposed receiver adopts the dual-conversion architecture to mitigate the burden of design of the frequency synthesizer. Accordingly, the proposed frequency synthesizer generates four LO tones from only one VCO. The receiver front-end achieves power gain of 16.3 to 21 dB, NF of 7 to 7.6 dB over $3{\sim}5\;GHz$, and IIP3 of -21 dBm, while consuming 190 mW from a 1.8 V supply.