• Information and Communications Magazine
• /
• v.27 no.7
• /
• pp.16-20
• /
• 2010

이동통신망을 활용하여 사물과 사물간의 연결(Connectivity)을 제공하는 사물통신 서비스를 M2M이라 하며, 이는 인구수의 제약을 넘어서는 신규 가입자시장이다. M2M은 원격측정, 감시, 제어, 관제 등의 기능을 제공하며, 사물과 현장의 정보를 수집하는 센싱부와 이를 전달하는 광역통신망 및 수집정보의 가공, 처리, 통제하는 서버시스템의 3요소로 구성된다. 이를 위해서 기기, 센서, 통신모듈, 통신 및 IT등 다양한 전문Player의 협업을 필요로 하는 Value Chain을 가지고 있다. M2M 시장은 고정물, 이동물, 차량 및 대인시장으로 구분할 수 있으며, 전력, 수도 등 검침, 보안방범, 재난재해관리, 환경감시, 차량관제, 대인 위치추적 등 다양한 분야에서 적용되고 있다. 국내 M2M 시장은 지난 10년간 지속적인 성장을 계속하고 있으나 급속성장 및 활성화를 위하여는 소규모 세분시장의 한계를 극복하고 규모의 경제를 달성할 수 있는 방안의 모색, Value Chain내 다양한 Player간 Win-Win 협업체계의 강화, 높은 QoS에 의한 서비스 안정성 및 도입운영의 용이성 제고, 초기도입 비용장벽의 완화 등이 필요한 것으로 분석된다. 향후 높은 성장 잠재력을 가지고 있는 M2M 시장은 참여자들의 창의적인 대상시장 발굴과 가치의 제공을 통하여 상생 발전의 선순환을 도모할 필요가 있다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.345-351
• /
• 2000

To improve the current waveform of diode rectifiers, we propose a new operating principle of the voltage diode rectifiers. In the conventional voltage rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses ones and a small reactor not boost the output voltage but improve the input current waveform. A circuit design method is shown and confirmed simulation. It explained that compared conventional PWM(Pulse-width modulated)inverter with HPWM(Half Pulse-width modulated)inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting. Output voltage and current of this paper were applied for real air-conditioner.

• Journal of Biomedical Engineering Research
• /
• v.42 no.6
• /
• pp.259-267
• /
• 2021

Recently, the market for personal health care and medical devices based on Bluetooth Low Energy(BLE) has grown rapidly. BLE is being used in various medical data communication devices based on low power consumption and universal compatibility. However, since data errors occurring in the transmission of medical data can lead to medical accidents, it is necessary to analyze the causes of errors and study methods to reduce data error. In this paper, the minimum communication speed to be used in medical devices was set to at least 800 byte/sec based on the wireless electrocardiography regulations of the Ministry of Food and Drug Safety. And the data loss rate was tested when data was transmitted at a speed higher than 800 byte/sec. The factors that cause communication data error were classified, and the relationship between each factor and the data error rate was analyzed through experiments. When there were two or more activated peripherals connected to the central, data error occurred due to channel hopping and bottleneck, and the data error rate increased in proportion to the communication distance and the number of activated peripherals. Through this experiment, when the BLE is used in a medical device that intermittently transmits biosignal data, the risk of a medical accident is predicted to be low if the number of peripherals is 3 or less. But, it was determined that BLE would not be suitable for the development of a biosignal measuring device that must be continuously transmitted in real time, such as an electrocardiogram.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.48-50
• /
• 2005

As technology is developed, customers want to use many functions in one system. Manufacturers want to reach the customer's needs, make systems more small, thin, light-weight. To make them real, it is necessary to make components to be small and thin. But components of power stage are big, thick and heavy-weighted yet. especially power inductor is the most significant component. This paper proposed a novel chip-type power inductor I-type inductor. Inductor that proposed has 3225-size, 5.6uH and 1.3A of max saturation current. And it has $R_{DC}$ of $0.25{\Omega}$ which is smaller than $0.45{\Omega}$ of chip-type inductor and $0.9{\Omega}$ of coil-type inductor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.9
• /
• pp.498-502
• /
• 1999

Harmonics and the reactive power related problems in the supply and demand side are increasing with the proliferation of nonlinear loads such as power converters in industrial applications. Filtering options such as passive, active and hybrid filters are countermeasures against these problems. In this study, a novel hybrid active filter topology with a new approach to enhance the system performance is presented. In this study, a novel hybrid active filter topology with a new approach to enhance the system performance is presented. The proposed topology comprised a parallel inverter and a hybrid active filter. It improves the system efficiency and reduces VA ratings, hence, overall filtering cost. The system operation, control and experimental verification on three phase rectifier and/or capacitor loads are presented.