• 제목/요약/키워드: types of estimation in measurement

검색결과 102건 처리시간 0.032초

Comparative Estimation of Exposure Level and Health Risk Assessment of Highly Produced Pesticides to Agriculture Operators by Using Default Dermal Absorption Rate or Actual Measurement Values

  • Kim, Su-Hyeon;Lee, Chang-Hun;Kim, Ki-Hun;Jeong, Sang-Hee
    • 대한의생명과학회지
    • /
    • 제22권4호
    • /
    • pp.199-206
    • /
    • 2016
  • Pesticides are widely used to prevent loss of agricultural production but extensive exposure can induce health problems to pesticide operators. This study was performed to evaluate the health risk of highly produced pesticides used in fruit growing farm land by comparison of estimated exposure level with AOEL using KO-POEM program. AOEL was driven based on NOAEL of each pesticide evaluated by JMPR, EFSA or KRDA. In calculation of exposure level, types of formulation, dilution factors, spraying duration and motor type and exposure protection device were allocated according to actual condition of use. Dermal absorption rate was differently applied among EFSA default values (25% or 75%), general default value (10%) or real test result values to know the plausibility of default values and safety of pesticide to operators in outline. Twenty pesticide ingredients (fungicides and insecticides) were produced more than 30 tons per year, which were mancozeb, chlorothalonil, imidaclopirid and etc in order. Dermal absorption rates obtained from studies were various from 0.07 to 81% but mostly under 10%. The estimated exposure levels showed big differences more than 10 times higher when using EFSA default rate and up to 5 times higher when using general rate of 10% comparing using rates of test results. Mancozeb, chlorthalonil, diazinon and chlorpyrifos presented still higher exposure level than AOEL even when using test absorption rate from study, which suggests that re-evaluation of AOEL or dermal exposure absorption rate or strict management are required for health protection of operators who use those four pesticides in farm land.

오리피스형 공기분사기 생성 기포소음 추정 연구 (A study on the estimation of bubble noise generated by orifice type bubble generators)

  • 박철수;정소원;김건도;문일성;김인강
    • 한국음향학회지
    • /
    • 제41권3호
    • /
    • pp.255-267
    • /
    • 2022
  • 본 논문에서는 오리피스형 공기분사기에서 생성된 기포소음 특성을 고찰하였다. 전반적인 기포소음 특성을 파악하기 위해 Strasberg와 Blake가 각각 제안한 기포소음 스펙트럼을 살펴보았고, 기포소음 계측을 위해 선박해양플랜트연구소의 대형캐비테이션터널에서 공기분사 실험을 수행하였다. 본 실험은 5종의 공기분사기를 이용하여 정지 유체 조건과 유동 조건에서 수행되었다. 계측결과로부터 실험 조건에 따른 기포소음 스펙트럼 특성을 관찰하였고, 회귀분석을 통해 기포소음에 대한 인자별 영향을 분석하였다. 끝으로 회귀분석 결과를 기반으로 기포소음 추정식을 제안하였고 제안된 추정식은 계측결과와 잘 일치함을 확인하였다.

두부제조공정(製造工程)중 Calcium 염(鹽)의 행동(行動)과 분포(分布) -제1보(第一報). 전기전도도법(電氣傳導度法)에 의한 두부 및 순물의 Calcium 농도 측정방법(測定方法)- (Transport and Distribution of Calcium Salt in Tofu Manufacturing Process -Part I. Conductometric Measurement of Calcium Salt in Tofu and Drained Solution-)

  • 임상빈;이춘기;전재근
    • Applied Biological Chemistry
    • /
    • 제28권1호
    • /
    • pp.8-12
    • /
    • 1985
  • 두부의 제조공정중 Ca염의 농도를 전기전도도법에 의하여 측정할 수 있도록 전극을 제작하여 화학분석 방법과 비교하였다. 전극은 구리판을 재료로 3가지 종류로 제작하여 $CaCl_2$용액, 순물, -agar gel 및 두부에서 전기전도도를 측정하는데 사용하였다. 전기전도도와(Y, mho)와 Ca농도 (C, Mole $\bar{C}$, mg% 습물기준) 간에는 직선적 비례관계를 보였고, 순물과 두부에서 실험적으로 얻어진 회귀직선의 방정식은 다음과 같다. Y순물 = 0.6364C+0.0775 Y두부$=7.1503{\times}10^{-5}\bar{C}-2.9895{\times}10^{-3}$ 이들 관계식은 두부에서 r=0.91(두부)에서 r=0.99(순물)에 이르는 신뢰도를 나타냈다.

  • PDF

고속 전차선로 드로퍼에 대한 기계적 하중에 관한 연구 (Mechanical Loads of Dropper for High Speed Electric Railway)

  • 이기천;이태훈;이종우
    • 한국철도학회논문집
    • /
    • 제14권3호
    • /
    • pp.222-227
    • /
    • 2011
  • 드로퍼는 전차선로에서 여러형태의 클램프로 취부되어 전차선이 수평으로 유지하도록 지지하고, 판토그라프가 통과할 때 굽힘에 대한 기계적 응력에 영향을 받는다. 고속선용 드로퍼의 파단 원인을 조사하기 위해, 이론적 분석 및 시험을 실행하였다. 본 논문에서 사전이도에 의한 드로퍼의 정적 하중을 계산하였고, 시험에서 측정된 값과 유사하였다. 드로퍼 와이어의 파단원인을 분석하기 위해 현장에서 파단된 시료는 SEM 분석을 하였고, 새 시료도 일부 병행하며 시행하였다. 마지막으로, 고속열차가 300km/h로 통과할 때 드로퍼에 대한 동적 하중의 변화를 측정하였다. 기계적 하중이 반복적으로 발생될 때, 드로퍼 와이어는 피로에 의해 파단될 것이다. 이 결과는 고속전차선로 유지보수의 특별 관리와 드로퍼의 수명평가를 하는데 활용될 수 있을 것이다.

밭 관개의 계획용수량 및 시설용량의 정립에 관한 연구 -증발산량 실측에 의한 밭용수량의 추정에 관하여- (Study on the Establishment of Project Duty of Water and Facility Capacity in Upland Irrigation - On the Estimation of Duty of Water for the Upland Crops by the Measurement of Evapotranspiration -)

  • 김시원;김선주
    • 한국농공학회지
    • /
    • 제30권4호
    • /
    • pp.23-44
    • /
    • 1988
  • The evaportranspiration of upland crops was measured by four types of lysimeter and water consumption characteristics together with the optimum irrigation point by the crops was defind. Among the evapotranspiration estimation formulas, the constant of wind function in the modified Penman equation was corrected to agree with the meteorological conditions of Korea. The evapotranspiration of the crops in the project standard year was estimated according to the cropping system of the project area in Chungju, and from the estimated evapotras - spiration, net duty of water per one time and irrigation in tervals were investigated. The results obtained are summarized as follows: 1. The evapotranspiration of the same crop measured at the same plot was slightly different by the lysimetric methods, and among the four types of lysimeter, the accuracy of the floating lysimeter was the highest. 2. The yields among the watering treatments showed the significance of 5% in the expe- riment with red cabbage and Chinese cabbage, and significance of 1% in the crisphead lettuce, and the optimum irrigation point for the tested crops was defined ad pF 2.0 by the least squre difference test. 3. The evapotranspiration of the crops in the mid-season stage showed maximum among the growing stages, and the average daily evapotranspiration by the crops over the growing seasons of cabbage, crisphead lettuce, Chinese cabbage, summer cucumber, tornato, salary and autumn cucumber was 4.18mm, 4.77mm, 3.9qrnm, 5.68mnn, joonim, 4.26mm and 3.3qrnn, respectively. 4. From the investigated soil moisture extration pattern(SMEP) of the crisphead lettuce, cucumber and tomato, the proportion of the first layer in the initial stage showed over so%, and the SMEP of the lowest fourth layer during the late-season stage in the experiment cabbage and Chinese cabbage was 15.8% and 16.9, respectively, with showed that the root elongated th the lowest soil layer. 5. The total available moisture(TAM) of clay loam was 21.2-23.3mm and that of sandy loam was 16.1 - 19.0mm under the optimum irrigation point of pF. 2.0, and the total readily available moisture( TRAM) of the crops cultivated in the clay loam soil was larger than that cultivated in the sandy loam soil, and the TRAM during the mid-and late-season were larger than that of the inital and crop development stage. 6. The estimated evapotranspration by the corrected Pennam equation, whkh corrected the constant of the wind function in the modified Penman equation, was nearly agreed with the actually measured evaporanspiration of grass. 7. Among the several evaportranspiration estimation methods, the evapotranspiration es- timated by the corrected Pennam equation was closed to the actual evapotranspiration of reference crop (grass) evapotranspiration, therefore it is suggested to use the corrected Penman equation to determine the duty of water of corps. 8. The average crop coefficient (Kc) of cabbage by the corrected Penman equation was 0.94 and that of crisphead lettuce, summer cucumber, tomato, salary, Chinese cabbage and autumn cucumber was 1.07, 1.22, 1.02, 1.01, 1.35, 1.09, respectively 9. The estimated total evapotranspiration of cabbage in the project area( Chungju) by the corrected Penman equation was 223.9mm and that of crisphead lettuce, Chinese cabbage, summer cucumber, tomato, salary and auturun cucumber was 215.7mm, 205.9mm, 359.Omrn, 300.9mm, 332.lmm and 202.7mm, respectively. 10. The net duty of water per one time of the crops cultivated in the sandy loam soil, and the net duty of water per one time in the mid-season & late-season showed larger than that of the initial stage. 11. The shortest irrigation interval of cabbage in the project area was 4.2 days, and that of crisphead lettuce, Chinese cabbage, cucumber, tomato and salary was 1.2days, 2.3days, 1.8days, 2.2days and 2.7days, respectively.

  • PDF

Preparation of Styrene-Ethyl acylate Core-shell Structured Detection Materials for aMeasurement of the Wall Contamination by Emulsion Polymerization

  • Hwang, Ho-Sang;Seo, Bum-Kyoung;Lee, Dong-Gyu;Lee, Kune-Woo
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2009년도 학술논문요약집
    • /
    • pp.84-85
    • /
    • 2009
  • New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

  • PDF

대기 중 모노테르펜 (α-피넨, 3-카렌, R-리모넨, 1,8-시네올) 측정을 위한 혼합표준가스개발 (Development of Primary Standard Gas Mixtures for Monitoring Monoterpenes (α-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) Ambient Levels (at 2 nmol/mol))

  • 강지환;김미언;김용두;이영우;이상일
    • 한국대기환경학회지
    • /
    • 제32권3호
    • /
    • pp.320-328
    • /
    • 2016
  • Among biogenic volatile organic compounds (BVOCs) in the natural ecosystem, monoterpenes, along with isoprene, play important roles in atmospheric chemistry and make significant impacts on air pollution and climate change, especially due to their contribution to secondary organic aerosol production and photochemical ozone formation. It is essential to measure monoterpene concentrations accurately for understanding their oxidation processes, emission processes and estimation, and interactions between biosphere and atmosphere. Thus, traceable calibration standards are crucial for the accurate measurement of monoterpenes at ambient levels. However, there are limited information about developing calibrations standards for monoterpenes in pressured cylinders. This study describes about developing primary standard gas mixtures (PSMs) for monoterpenes at about 2 nmol/mol, near ambient levels. The micro-gravimetric method was applied to prepare monoterpene (${\alpha}$-pinene, 3-carene, R-(+)-limonene, 1,8-cineole) PSMs at $10{\mu}mol/mol$ and then the PSMs were further diluted to 2 nmol/mol level. To select an optimal cylinder for the development of monoterpene PSMs, three different kinds of cylinders were used for the preparation and were evaluated for uncertainty sources including long-term stability. Results showed that aluminum cylinders with a special internal surface treatment (Experis) had little adsorption loss on the cylinder internal surface and good long-term stability compared to two other cylinder types with no treatment and a special treatment (Aculife). Results from uncertainty estimation suggested that monoterpene PSMs can be prepared in pressured cylinders with a special treatment (Experis) at 2 nmol/mol level with an uncertainty of less than 4%.

보급형 도로환경센서 및 안개 가시거리 추정식 개발 연구 (Study on the Development of Advanced Road Environment Sensor and Estimation Formula for Fog Visibility Distance)

  • 조중호;진민수;조원범
    • 한국ITS학회 논문지
    • /
    • 제21권4호
    • /
    • pp.50-61
    • /
    • 2022
  • 눈, 비, 안개, 미세먼지는 차량 운전자의 시야를 방해하고 이는 안전거리 미확보와 속도 편차의 증가를 야기하여 반복적인 대형 교통사고의 원인이 되고 있다. 본 연구에서는 안개, 눈, 비, 온도, 습도, 풍향, 풍속, 일사량, 기압, 미세먼지, 강수량 등 11종류를 측정할 수 있는 보급형 국산 도로환경센서를 개발하였으며, 기존에 상용되고 있는 안개 가시거리 센서로부터 측정된 가시거리와 개발 센서의 적외선 송·수신부를 통해 측정된 적외선 신호값을 비교하여, 두 측정값의 관계를 도출하였다. 기존 안개 가시거리 센서와 개발센서 측정값의 관계는 도로 안전에 직접적 영향을 미치는 500m 이하의 가시거리에서 측정된 데이터를 대상으로 도출되었다. 개발센서의 적외선 신호값과 기준 센서에서 도출된 가시거리의 비교 결과, 통계적으로 두 데이터 간 상관관계가 매우 높은 것으로 분석되었으며, 개발 센서의 적외선 신호값을 활용하여 안개 가시거리를 기준 센서와 매우 유의한 수준으로 추정할 수 있는 것으로 판단된다.

고무경도계를 이용한 콘크리트의 응결시간 추정 가능성 분석 (Estimation of Setting Time of Concrete Using Rubber Hardness Meter)

  • 한민철;한인덕;신용섭
    • 한국건설순환자원학회논문집
    • /
    • 제7권4호
    • /
    • pp.358-366
    • /
    • 2019
  • 본 연구는 현재 작업자의 경험과 감각에만 의존하고있는 표면 마감작업시간 판정을 Durometer 측정치와 Proctor 관입저항 시험치를 비교하여 응결시간 판정에 듀로미터를 활용함으로써 실무 구조체의 과학적이고 정량적인 표면 마감시간의 추정 가능성을 분석하고자 하였다. 연구 결과로 Durometer 측정치와 Proctor 관입저항 시험치는 상관성이 높다고 판단되어 콘크리트의 경우 초결 측정시에는 Durometer C type으로 42HD전후 일 때 표면 마감작업 개시가능 시간결정에, 종결 측정시에는 Durometer D type으로 10HD 전후일때 표면마감 한계시간, 양생개시 시간 등에 유용하게 사용할 수 있을 것으로 사료되었다.

초고속 네트워크 상에서의 스트림형 트래픽의 전송 품질 평가 (Evaluation of Transmission Quality for Stream-type traffics on Very High-speed Network)

  • 이양민;이재기
    • 정보처리학회논문지C
    • /
    • 제11C권6호
    • /
    • pp.773-780
    • /
    • 2004
  • 본 논문에서는 대표적인 스트림형 트래픽인 DV와 MPEG2를 초고속 네트워크 상에서 전송하고 이들 스트림에 대한 최종 사용자의 주관적 평가를 수행하였다. 두 가지 스트림형 데이터에 대해 화질 측정은 ITU-R BT.500-1을 기반으로 하여 측정하였고, 음질 측정은 ITU-R BS.1116-1을 기반으로 측정하였다. 또한 최종 사용자의 주관적 평가를 얻기 위한 실험 방법으로는 DSCQS 5단계 평가 방법을 채택하였다. 유사한 조건하에서 MPEG2 스트림의 경우, 네트워크 트래픽 파라미터가 급증하는 $54\%$의 부하율에서 화질과 음질의 평가 등급이 급격히 하강한다. DV의 경우 화질은 MPEG2와 마찬가지로 $54\%$의 부하율에서 평가 등급이 하락하지만 그 변화의 정도가 MPEG2에 비해 완만하며 점진적인 것을 확인할 수 있다. 반면 DV 음질의 경우는 부하율 $70\%$까지 사용자의 주관적 평가 등급이 우수하여 사용자의 주관적 평가를 고려한 트래픽 제어 및 QoS 제어가 요구된다. 결론적으로 MPEG2의 경우는 네트워크 상의 실측값과 최종 사용자의 주관적 평가가 거의 동일하므로, 네트워크 실측값만으로 트래픽 제어가 가능하고, DV의 경우는 네트워크 상의 실측값과 최종 사용자의 주관적 평가 등급을 동시에 고려한 트래픽 제어가 가능하다.