• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.348-363
• /
• 2013

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.

• Strategy21
• /
• s.30
• /
• pp.63-98
• /
• 2012

Northeast Asia has a multi-layered security structure within which major economic and military powers both confront one another and cooperate at the same time. Major regional powers maintain mutually cooperative activities in the economic sphere while competing one another in order to secure a dominant position in the politico-military arena. The multifarious threats, posed by the North Korea's nuclear development, territorial disputes, and maritime demarcation line issues demonstrate that Northeast Asia suffers more from military conflicts and strifes than any other region in the world. Specifically, major maritime security threats include North Korea's nuclear proliferation and missile launching problems as well as military provocations nearby the Northern Limit Line(NLL) as witnessed in the Cheonan naval ship and Yeonpyong incidents. The ROK Navy has been supplementing its firm military readiness posture in consideration of North Korea's threats on the NLL. It has performed superb roles in defending the nation and establishing the Navy advanced and best picked. It also has been conducive to defend the nation from external military threats and invasion, secure the sea lanes of communications, and establish regional stability and world peace. In order to effectively cope with the strategic environment and future warfares, the ROK Navy needs to shift its military structure to one that is more information and technology intensive. In addition, it should consolidate the ROK-US alliance and extend military cooperative measures with neighboring countries in the Asia-Pacific region. Evolved steadily for the last 60 years, the ROK-US alliance format has contributed to peace and security on the Korean peninsula and in the Northeast Asian region. In conclusion, this manuscript contends that the ROK Navy should strive for the establishment of the following: (1) Construction of Jeju Naval Base; (2) Strategic Navy Equipped with War Deterrence Capabilities; (3) Korean-type of System of Systems; (4) Structure, Budget and Human Resources of the Naval Forces Similar to the Advanced Countries; and (5) Strategic Maritime Alliance and Alignment System as well as Domestic Governance Network for the Naval Families.

• The Journal of shipping and logistics
• /
• v.35 no.1
• /
• pp.21-50
• /
• 2019

The aim of this study is to analyse a characteristic analysis of coastal passenger vessels' voyage scheduling using the Panel Regression Analysis. The GLS and Fixed Effect Analysis show that the number of canceled flights and passenger transport performance have a positive impact on the voyage scheduling, and that the freight transport performance and freight income vary from model to model. Also, through the LSDV and OLS analysis, the trend of cluster formation by regional office was confirmed. This indicates that there are frequent changes in passenger ship companies and ships, and in-depth plans are needed in various respects rather than the expansion of unconditional ships. Subsequent studies need to generate more detailed and practical results by further analysis of detailed factors, dividing them by route and vessel type.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.155-183
• /
• 2011

The purpose of this paper is to analyze competition status of Korean and Chinese vessels in the EU market. To achieve this purpose, this study uses Market Share Index, Export Bias Index, Trade Specialization Index, Export Similarity Index, and Market Share Expansion Ratio-Export Similarity Deepening Ratio as analyzing method. The statistical data used in this study are obtained from the trade statistics for 5 years(2005-2009) produced by Korean International Trade Association. The results of this study show that Korean ships are less competitive than Chinese ones in the EU export market in that Korea does not export various kinds of ships but export some restricted kinds of vessels even in the competitive ship, implying that Korea has been gradually losing its competitiveness. These results suggest that Korea should improve the competitiveness of shipbuilding industry by pursuing such differentiated strategies as exporting high value-added vessels while keeping on maintaining Korea's dominance over its competitive ships to overcome China's competitive advantage in the EU region.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.654-661
• /
• 2018

This paper analyzes the type of facilities and equipment of the marina port and analyzes its lift facilities (lift pier) and equipment (marine mobile lift). It set up the lift facilities and equipment standards. Depending on the gross tonnage of vessels in operation in Korea, the required inner width of lift piers is 5.50 m for 35-ton vessels, and 6.20 m for 50-ton vessels. The inside width of the marine mobile lift is 6.10 m for 35-ton vessels, and 6.80 m for 50-ton vessels. There are two places where the target ship can be lifted from the lift pier installed on the domestic marina, and other marinas' lift piers inner widths are insufficient by about 0.35 ~ 0.50 m. Among the marine mobile lifts in operation, there were two apparatuses that secured the inside width necessary to lift the target vessel. Other marine mobile lifts' inner widths are insufficient by about 0.3 ~ 0.6 m.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.369-376
• /
• 2021

The International Maritime Organization has developed the Energy Efficiency Design Index, an index related to carbon dioxide emissions, to enforce regulations on newly built ships. In this study, a new type of energy-saving device called the ring stator was used for 158k crude oil carriers, whose hull form was developed as a very thin after-body hull to reduce the resistance by delaying separation. The Energy-Saving Device (ESD) particularly involving the duct, is not adapted to the thin-after body hull form-like container ship. This new ring stator was developed considering these characteristics. A parametric study was conducted through Computational Fluid Dynamics (CFD) analysis using the Star-CCM+ program, and approximately 3.4 % improvement in propulsion efficiency was achieved. Further optimization investigations and experimental studies should be conducted in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.142-149
• /
• 1996

Pyramid type three roll bending machines are widely used in roll-bending process to produce singly curved plate. In forming singly curved plate, controlling the vertical displacement of the center roller is most important to acquire the shape required and automation system of the process. In this paper roller bending process is modeled as an elastic-plastic phenomenon and analyzed using beam theory and finite element method. In finite element analysis the workpiece is modeled by using beam elements and plane strain elements respectively. Through the analyses vertical center roller displacement is obtained to get constant curvature distribution along arc length. The relationship between center roller displacement and curvature in steady state as well as residual stress and strain along plate thickness direction are calculated through finite element analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.161-164
• /
• 2022

부유식 라이다는 해상풍력단지 조성시 필수적으로 수행하고 있는 풍황관측 업무에 새로운 패러다임을 제공하고 있는 시스템으로, 전통적으로 풍황관측을 수행하고 있던 해상기상관측탑을 대체하여 사업 초기의 대규모 공사를 획기적으로 축소하여 시간과 비용을 절약하고, 환경적 영향을 최소화 하며, 지역사회의 반발 요소까지 줄일 수 있어 해당 업계의 표준으로 자리잡고 있는 중이다. 다만 부표식의 동요에 따른 외란적 요소가 관측자료의 신뢰성에 영향을 미치는 만큼 안정적인 플랫폼의 설계 및 검증이 매우 중요한 상황이며, 국내에서는 해당기술에 대한 늦은 진입으로 인해 다수의 외산장비 제조사들이 국내시장까지 선점하고 있는 상황이다. 한국의 서해안은 천해 환경으로 조석차가 매우 커 지역에 따라 강한 조류가 반복적으로 나타나며, 계절별로 상이한 강한 에너지의 파랑이 형성되는 등 플랫폼에 안정도에 많은 영향을 미치는 바다 환경을 갖고 있다. 본 논문에서는 이러한 복잡한 환경적 특성을 갖고 있는 우리나라의 해역에 라이다 운영에 적합한 부표식에 대한 연구를 수행하며, 우선적으로 적용하였던 선박형 부표식의 최적화 설계 및 검증 사례를 소개하고, 향후 다양한 플랫폼 개발에 토대가 되는 중요 개념을 도출하고자 한다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.13 no.1
• /
• pp.99-116
• /
• 2001

Testing is a procedure used to measure a sample of behaviour in order to discover how well a seafarer performs, usually in comparison with others, or compared with identified performance criteria. In this context It is important that the test, in whatever form it is being used, yields consistent results by being valid, reliable and practical. Whilst we can only take a sample of a person's knowledge or comprehension about topic in this way, testing methods do provide a more reliable estimate of performance than most other observational techniques; unsystematic or irregular observation being too unreliable. The method of examination has been specified in the provisions of Regulation 12 of the Decree of the ship officers act as followings. Other necessary matters for conducting oral and written examinations have been set out by the Minister. But written examination is too shortage of period and small number of question to cover the qualification of each level and oral test is just simple and namely Traditionally, written examinations have been provided as the only means for determining the acquisition of knowledge by the mariner. Typically, the examination formats have taken the format of either an essay or multiple choice examinations. Essay items, used in the vast majority of subject examination(not in Korea), consisted of three basic types: situational, descriptive and computational. The level of certificate being examined determined the number and mix of the type of essay questions selected. Oral question has again been used by assessors of seafarer in a wide variety of contexts. Also, oral questioning is often used when observation of performance is undertaken to ask why a certain action has been taken, or to be broaden the scope of what has been observed. At end, Each techniques have their own advantage and disadvantage, so we have to choose some or all of the following techniques, depending upon the certificate, qualification or job for which the trainee is aiming. But in high lank, we have to use both of essay type and multiple choice and with enough time of oral test at least 30 minutes. Who would be the assessor? According to the STCW Code Section A-I/6, instructors, supervisor and assessors are appropriately qualified for particular types and levels of training or assessment of competence of seafarers either on board or ashore, as required under the Convention, in accordance with the provisions of this section.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.721-733
• /
• 2020

In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.