• Title/Summary/Keyword: type of a ring

Search Result 900, Processing Time 0.031 seconds

Synthesis and Photovoltaic Properties of Conjugated Polymers Having Push-pull Structure according to the Type of Side-chain in the N-Substituted Phenothiazine (Push-pull 구조의 공액 고분자 합성 및 Phenothiazine의 질소 원자에 치환된 Side-chain에 따른 유기박막태양전지로의 특성 연구)

  • Seong, Ki-Ho;Yun, Dae-Hee;Woo, Je-Wan
    • Applied Chemistry for Engineering
    • /
    • v.25 no.6
    • /
    • pp.624-631
    • /
    • 2014
  • In this study, a new series of conjugated polymer 3-(5-(5,6-bis(octyloxy)-7-(thiophen-2-yl)benzo[c][1,2,5]thiadiazol-4-yl)thiophen-2-yl)-10-(4-(octyloxy)phenyl)-10H-phenothiazine (P1) and 3-(5-(5,6-bis(octyloxy)-7-(thiophen-2-yl)benzo[c][1,2,5]thiadiazol-4-yl)thiophen-2-yl)-10-(4-((2-ethylhexyl)oxy)phenyl)-10H-phenothiazine (P2) were synthesised and organic photovoltaics (OPVs) properties were characterized. The push-pull structure polymer consisted of phenothiazine derivative as an electron donor and benzothiadiazole derivative as an electron acceptor. The aliphatic chain substituted aromatic ring was substituted at the position of N in phenothiazine for the electron-rich and improved solubility. Excellent thermal stabilities of P1 and P2 were confirmed by measured Td values as 321.9 and $323.7^{\circ}C$, respectively and the degrees of polymerization were 4,911 (P1) and 5,294 (P2). The maximum absorption wavelength of P1 and P2 were 549 and 566 nm, respectively. The device was fabricated and the OPVs property was measured. As a result, the power efficiency of conversion for P1 and P2 were 0.96 and 0.90%, respectively.

Anatomical Comparison of Compression, Opposite, and Lateral Woods in a Branch of Pinus parviflora S. et Z. (섬잣나무(Pinus parviflora S. et Z.) 지재의 압축이상재, 측면재, 대응재에 관한 해부학적 특성 비교)

  • Xu, Guang Zhu;Eom, Young Geun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.33 no.1 s.129
    • /
    • pp.38-47
    • /
    • 2005
  • Compression, lateral, and opposite woods in a branch of Pinus parviflora S. et Z. were described and compared in the qualitative anatomical aspects through light and scanning electron microscopy. Tracheid transition from earlywood to latewood in the compression wood appeared to be relatively more gradual than in the opposite or lateral wood. Growth ring width and proportion of latewood were thought to be greater in the compression wood than in the lateral or opposite wood. The latewood tracheids of compression wood in transverse surface were mostly round, differently from those of lateral and opposite woods with square to angular shapes. Also, intercellular spaces, helical cavities and checks, and slit-like pit apertures were observed only in the compression wood tracheids. Cross-field pitting in the compression wood appeared not to be used as diagnostic guide because of their severe alteration from normal fenestriform or window-like type to cupressoid to taxodioid types. In tangential surface, fusiform rays in the compression wood were wider but lower than those in the lateral wood or opposite wood. In conclusion, compression wood was different from lateral and opposite woods but lateral and opposite woods were almost identical in qualitative anatomical features.

Polyether Ester by Rubber Content and Rubber According to the Type of Dynamic Vulcanized Properties (TPEE) (폴리에스터계 동적가교물의 고무함량 및 고무종류에 따른 물성)

  • Yun, Ju-Ho;Yun, Jung-Hwan;Ha, Seong-Mun;Kim, Il;Sim, Sang-Eun
    • Elastomers and Composites
    • /
    • v.48 no.1
    • /
    • pp.67-75
    • /
    • 2013
  • E-TPE (Engineering Thermoplastic Polyether Ester) was Ester Elastomer with functional groups as recycling and fast processability. In addition, if the car's lightweight enough to highlight eco-friendly materials that help to improve fuel economy has become. Have all the attributes of the rubber and engineering plastics E-TPE the available temperature area is spacious, heat resistance and oil resistance is excellent but getting attention as a new material in the field of auto parts in the field of electrical and electronic domestic depends entirely on imports by the lack of core technology and has been research and development is urgently needed. In this study, the hard segments, polyester (TPEE) as the base soft elastomers of the segments Ethylen-prophylene-Copolymer and CSM (Choloro sulphonated polyethylene Rubber), VAMAC (Ethylene Acrylic Rubber), NBR (Acrylonitrin Butadiene Rubber), 1, 3-Phenylene-bisoxazoline is dealing with Dynamic Vulcanized by content and added rubber properties, thermal variation observed. As a result, the properties of the dynamic vulcanization with NBR compared to other rubber heat resistance and oil resistance is on the increase.

A STUDY ON THE SHEAR BOND STRENGTH OF LUTING GLASS IONOMER AND DENTIN TREATED WITH CALCIUM SOLUTION (칼슘수용액으로 처리한 상아질과 합착용 글래스아이오노머의 전단결합강도에 관한 연구)

  • Paik, Young-Girl;Lee, Sung-Bok;Park, Nam-Soo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.34 no.3
    • /
    • pp.593-610
    • /
    • 1996
  • The objective of this paper was to evaluate the shear bond strength of luting glass ionomer cement with defferent calcium based solution treatment on dentin surface. 120 extracted human teeth were classified into 12 group based on presence of smear layer on dentin surface and type of treatment solution. Smear layer remove on dentin surface was done using 6% citric acid for 60 seconds. Five different dentin surface treatment solutions(calcium acetate, calcium carbonate, clacium chlorided, calcium hydroxide, and calcium phosphate) were evaluated in this study. After surface modification, metal ring(inner diameter : 3mm, depth : 1mm) was placed to expose the same dentin surface area and inner space was filled with luting glass ionomer cement according to the recommended procedure for stadard clinical procedure. The shear bond strength of glass ionomer cement was determined after 24 hours. SEM was used for the evaluation of the surface morphologic changes and EDAX analysis was done for determination of the change of the calcium contents of treated dentin. Follwing conclusion can be drawn : 1. In the group of the dentin surface with smear layer, the calcium carbonate solution was the most effective for the increase of the clacium content and the shear bond strength of glass ionomer cement to dentin surfaces. 2. In the group of the calcium carbonate treated dentin with msear layer, the shear bond strength was increased twice compared to the control group and cohesive failure mode was observed. 3. The shear bond strength of cement was increased significantly be the removal of smear layer using 6% citric aicd. However, additional calcium solution treatments were not effective for further bond strength increase. 4. The shear bond strength of cement was significantly improved by both of the removal of smear layer and the calcium solution treatment, and the former was more effective for bond strength improvement. 5. The smear layer removed/calcium solution treated groups showed dentinal tubule obstruction and crystal attachment in SEM evaluation. However, the shear bond strengths of these groups were not increased compared to the smear layer removed/no dentin treatment group.

  • PDF

All-Solid-State Ion-Selective Electrodes With Organic Solvents Soluble Conducting Polymer for Chemical Sensor (화학센서를 위한 유기 용해성이 좋은 도전성 고분자가 포함된 전체 고체상태 이온 선택성 전극에 대한 연구)

  • Kim, Joong-Il;Park, Jong-Ho;Jang, Won;Heo, Min;Na, Young-Ho;Shin, Jae-Ho;Kim, Do-Young;Um, Hwan-Sub;Lee, Sang-Woo;Kim, In-Tae
    • Journal of the Korean Applied Science and Technology
    • /
    • v.30 no.2
    • /
    • pp.258-263
    • /
    • 2013
  • New conducting polymers containing heterocyclic ring with carbazole, EDOT and benzobisthiazole were synthesized and characterized by organic spectroscopic methods. Potentiometric ion-selective membrane electrodes (ISMEs) have been extensively used for ion analysis in clinical, environmental, and industeial fields owing to its wide response range (4 to 7 orders of magnitude), no effect of sample turbidity, fast response time, and ease of miniaturization. Considerable attention has been given to alternative use of room temperature vulcanizing (RTV)-type silicone rubber(SR) owing to its strong adhesion and high thermal durability. Unfortunately, the high membrane resistance of SR-based (ISMs)(2 to 3 higher orders of magnitude compared to those of poly(vinyl chloride)(PVC)-based ones) has significantly restricted its application. Herein we demonstrate a new method to reduce membrane resistance via addition of new conducting polymer into the SR-based ISMs.

A Development of Stem Analysis Program and its Comparison with other Method for Increment Calculation (수간석해(樹幹析解) 전산(電算)프로그램 개발(開發) 및 생장량(生長量) 계산방법(計算方法)의 비교(比較)에 관(關)한 연구(硏究))

  • Byun, Woo Hyuk;Lee, Woo Kyun;Yun, Kwang Bae
    • Journal of Korean Society of Forest Science
    • /
    • v.79 no.1
    • /
    • pp.1-15
    • /
    • 1990
  • In this study the stem analysis program, which can be operated with personal computer was developed to reduce time and cost of calculation, and to increase accuracy of analysis. The stem analysis method used in this program was compared with other methods. The results obtained were as follows : The value, 1/100mm measured from the latest annual ring measurement machine (Jahrringme${\beta}$geraete Johan Type II) was automatically inputed to the computer and saved into given file name. Turbo Pascal program was written to do this. The measured data was analyzed by stem analysis calculation program written by Fortran-77. Volume and height increments were approximated by spline function, and diameter of the stem disk was calculated by quadratic mean method. The increment values calculated by the programs were printed annually and in every five-year. Stem analysis diagram and several increment graphs were also easily printed. The result compared between those analysis methods showed that quadratic mean could reduce the error caused from eccentric pith. When the stem taper curve method, approximated by spline function, was used in the calculation of tree height and volume, increments would be more exactly calculated.

  • PDF

The Emergence of Wooden Chamber Tombs with Stone Mound and the Changing Nature of Tombs at the Wolseong North Burial Ground of Gyeongju in the Early Silla Phase (신라 전기 적석목곽분의 출현과 경주 월성북고분군의 묘제 전개)

  • Choi, Byung Hyun
    • Korean Journal of Heritage: History & Science
    • /
    • v.49 no.3
    • /
    • pp.154-201
    • /
    • 2016
  • During the Incipient and Early Silla phases, which witnessed the establishment and development of the ancient Silla state, the Wolseong North Burial Ground functioned as not only the central burial ground in the Gyeongju region of the capital of Silla but also as the central burial ground of the whole Silla state. Wolseong North Burial Ground is where transformations in Silla funerary architecture first occurred. As such, an empirical study of the tombs constructed at this burial ground can be regarded as a starting point from which an understanding of the development of the tomb culture of the Silla state may be achieved. This paper therefore aims to examine the changing nature of the tomb culture of the Early Silla phase through the burial data of Wolseong North Burial Ground and the Gyeongju region. Wooden chamber tombs were constructed from the late phase of Saroguk. At Wolseong North Burial Ground, which eventually developed into the central burial ground of the Gyeongju region, wooden chamber tombs embellished with stone packing emerged during the Incipient Silla phase; wooden chamber tombs with stone mounds, on the other hand, first appeared in the Early Silla phase and eventually became established as the central tomb type. A key difference between the wooden chamber tomb embellished with stone packing and the wooden chamber tomb with stone mound is that, in the case of the latter, stones were packed not only around sides of the wooden structure that acted as the burial chamber but also on top of this structure. The addition of a high earthen mound surrounded by protective ring of stones is another distinctive feature of the latter, presenting a contrast to the low mound of the former. During the Early Silla phase, two types of wooden chamber tombs with stone mounds were constructed at Wolseong North Burial Ground: those with burial chambers located above ground and those with subterranean burial chambers. Also constructed during this phase were the wooden chamber tomb embellished with packed stones, the wooden chamber tomb embellished with packed clay, simple earth cut burials, which had been used since the Incipient Silla phase, as well as the stone-lined burials with vertical entrance which first appeared in the Early Silla phase. However, of these different types of burials, it was only the wooden chamber tomb with stone mound that was covered with a 'high mound.' Differentiation between the different tomb types can also be observed in terms of location, type of burial chamber used, construction method, and tomb size. It is therefore possible to surmise that stratification between the different tomb types, which first emerged in the Incipient Silla phase, became intensified during the Early Silla phase.

Clinicopathologic Characteristics of Stage IV Early Gastric Cancer (IV기 조기위암의 임상병리학적 특성)

  • Kim, Min Kuk;An, Ji Yeong;Choi, Min Gew;Noh, Jae Hyung;Sohn, Tae Sung;Kim, Sung
    • Journal of Gastric Cancer
    • /
    • v.8 no.3
    • /
    • pp.136-140
    • /
    • 2008
  • Purpose: Stage IV early gastric carcinoma (EGC) is a rare disease. We report here on 10 cases of EGC that showed metastasis in more than 15 lymph nodes. Materials and Methods: A total of 8354 cases of gastric carcinoma in patients who underwent surgical procedures between January 2001 and January 2007 at Samsung Medical Center were studied, and 10 cases were classified as stage IV EGC. We investigated their clinicopathologic characteristics. Results: There were 5 males and 5 females. Their ages at operation ranged from 46 to 76 years with a mean age of 61. All of the 10 patients had undergone curative resection for gastric cancer. The pathological diagnosis confirmed that all of the patients had tumor confined to the submucosa. The median size of the tumors was 5.3cm and the mean number of dissected nodes was 45.5 with a mean number of 22.2 involved nodes. Six cases were classified as the diffuse type and 4 were classified as the intestinal type by Lauren's classification. Histologically, 3 cases were signet ring cell carcinoma, 3 were poorly differentiated, 2 were moderately differentiated and 2 were well differentiated adenocarcinoma. Endolymphatic invasion was found in 9 cases. The median follow-up was 31 months. Adjuvant chemotherapy was done in 9 patients, and the patient who did not receive chemotherapy died by cerebrovascular accident. 2 patient had recurrence of gastric cancer and 7 survived without recurrence. Conclusion: More cases should be collected and further studies on the molecular and cellular tumor characteristics are required to characterize these tumors that show aggressive lymphatic spread.

  • PDF

"A Study on Hebrews Clothing in the Old Testament" - Especially on Hair Styles, Headgears, Footwear and Personal Ornaments - (구약성서(舊約聖書)에 나타난 히브리인의 복식(服飾) - 두식(頭飾), 신발 및 장신구(裝身具) 중심(中心)으로 -)

  • Park, Chan-Boo
    • Journal of the Korean Society of Costume
    • /
    • v.10
    • /
    • pp.63-80
    • /
    • 1986
  • The Old Testament cotains mention of the history of creation and clothing in ancient Hebrew. This study dealt with Hebrew dress customs especially aimed at the manners of their hair styles, headgears, footwear and personal ornaments. References are Korean Revised Version, English King James Version and Revised Standard Version. There is little mention of hair styles and headgears in the Old Testament. Some sort of turban was worn by priests, and soldiers protected themselves with helmets, but most Israelitish men went bareheaded except on special occasions and often wear simple headbands. It was more common for women to use headwear of some type-turbans, scarves, and veils concealing the face. The veil was the distinctive female wearing apparel. All females, with the exception of maidservants and women in a low condition of life, wore a veil. It was the custom for women to wear a veil entirely covering their head in the public. Through most of the Old Testament periods long and thick hair was admired on men and women alike. The Hebrews were proud to have thick and abundant long hair, and they gave much attention to the care of their hair. The caring of hair was deeply related to their rituals. Nazirites never took a razor to their hair during his vow-days, but instead let it grow long, as an offering to God. Men would not cut their beards, but allow them to grow long. The Israelites' standard footwear was a pair of simple leather sandals. This was one of the items of clothing not highly prized. In a colloquial saying of the time, a pair of shoes signified something of small value, and to be barefoot except in times of mourning or on holy place, was a sign either of extreme poverty or humiliation, as in the case of war prisoners. Because precious stones were not mined in the Palestine-Syria region, Hebrews imported them from foreign country. They were consumer-to a large degree limited by their very modest standard of living-but not producers. Hebrews liked the precious stones and were motivated to acquire and wear jewels. Besides their use for adornment and as gifts, the precious or semiprecious stones were regarded by Jews of property. The Hebrews were not innovators in the field of decorative arts. The prohibition of the Law against making any "graven image" precluded the development of painting, sculpture, and other forms of representational art. Jewish men did not indulge in extravagances of dress, and there was little ornamentation among them. Men wore a signet ring on their right hand or sometimes suspended by a cord or chain around the neck. The necklaces, when worn by a male, also bore any symbol of his authority. Bracelets were extremely popular with both men and women, men usually preferring to wear them on their upper arms. The girdle was a very useful part of a man's clothing. It was used as a waist belt, or used to fasten a man's sword to his body, or served as a pouch in which to keep money and other things. Men often carried a cane or staff, which would be ornamented at the top. Among the women there was more apt to be ornamentation than among the men. Hebrew women liked to deck themselves with jewels, and ornamentation of the bride were specially luxurious and numerous. They wore rings on their fingers or On toes, ankle rings, earrings, nosering, necklace, bracelets. Their shapes were of cresent, waterdrops, scarab, insect, animal or plant. Sometimes those were used as amulets. They were made of ceramics, gold, silver, bronze, iron, and various precious stones which were mostly imported from Egypt and Sinai peninsular. Hebrews were given many religious regulations by Moses Law on their hair, headgears, sandals and ornamentation. Their clothing were deeply related with their customs especially with their religions and rituals. Hebrew religion was of monotheism and of revealed religion. Their religious leaders, the prophets who was inspired by God might need such many religious regulations to lead the idol oriented people to God through them.

  • PDF

Development and Application of a Novel Mammalian Cell Culture System for the Biocompatibility and Toxicity of Polymer Films and Metal Plate Biomaterials (고분자필름과 금속막 의료소재에 대한 생체적합성 및 독성 평가를 위한 새로운 세포배양시스템의 개발 및 적용)

  • Kwak, Moon Hwa;Yun, Woo Bin;Kim, Ji Eun;Sung, Ji Eun;Lee, Hyun Ah;Seo, Eun Ji;Nam, Gug Il;Jung, Young Jin;Hwang, Dae Youn
    • Journal of Life Science
    • /
    • v.26 no.6
    • /
    • pp.633-639
    • /
    • 2016
  • Biomaterials including polymer, metal, ceramic, and composite have been widely applied for medical uses as medical fibers, artificial blood vessels, artificial joints, implants, soft tissue, and plastic surgery materials owing to their physicochemical properties. However, the biocompatibility and toxicity for film- and plate-form biomaterials is difficult to measure in mammalian cells because there is no appropriate incubation system. To solve these problems, we developed a novel mammalian cell culture system consisting of a silicone ring, top panel, and bottom panel and we applied two polymer films (PF) and one metal plate (MP). This system was based on the principal of sandwiching a test sample between the top panel and the bottom panel. Following the assembly of the culture system, SK-MEL-2 cells were seeded onto Styela Clava Tunic (SCT)-PF, NaHCO3-added SCT (SCTN)-PF, and magnesium MP (MMP) and incubated at 37℃ for 24 hr and 48 hr. An MTT assay revealed that cell viability was maintained at a normal level in the SCT-PF culture group at 24 or 48 hr, although it rapidly decreased in the SCTN-PF culture group at 48 hr. Furthermore, the cell viability in the MMP culture group was very similar to that of the control group after incubation for 24 hr and 48 hr. Together, these results suggest the sandwich-type mammalian culture system developed here has the potential for the evaluation of the biocompatibility and toxicity of cells against PF- and MP-form biomaterials.