• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.59-66
• /
• 1996

Polyimides containing cyclobutane ring in main chain is known to be thermally stable and able to be developed in organic solvents after photolysis with 254 nm UV light. This type of polyimides can be used as promising positive photoresist in VLSI fabrication process. In the current VLSI process, photoresist films are formed by spin coating. The film thickness is more than several hundred nano meters. It seems that there is room for improvement of film coating process by introducing Langmuir Blodgett technique. Thereby ultra thin film photoresist can be formed, and higher density of integration in VLSI be achieved. In the present work, depositing procedure of LB films of this polyimide was investigated. LB film thickness was measured by ellipsometry to evaluate deposited film status. Chemical imidization procedure was studied to avoid several problems in thermal imidization. The pattern of submicron dimension has successfully formed on LB film of 8nm thick, which found showing good contrast.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.423-426
• /
• 2000

The 3-D $31.5$\times$31.5$\times$2.5mm$^3$model of contour vibration mode piezoelectric transformer with Pb($Ni_{1/2}$$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ ceramics was simulated by ANSYS according to the dot size 17, 18, 19, 20, 21 $mm\phi$ and analyzed the results. The mechanical quality factor of the 3-D model was decreased with the dot size and increased as 2605 at 20 $mm\phi$ and after then decreased again. The output voltage of that sample was 74123 [V] and the maximum stress of the dot electrode at that sample was 288[$10^7$N/$m^2$] and the maximum displacement of the ring electrode at that sample was 128 [$\mu\textrm{m}$].

• The Korean Journal of Cytopathology
• /
• v.6 no.1
• /
• pp.48-53
• /
• 1995

Kimura's disease is a chronic Inflammatory disorder of unknown etiology, presenting usually as a painless subcutaneous swelling in the head and neck region or in the lymph nodes. We experienced a case of Kimura's lymphadenitis with characteristic Warthin-Finkeldey type polykaryocytes by fine needle aspiration cytology. The patient was a 10-year old male with two enlarged lymph nodes in the postauricular area. Fine needle aspiration cytology from the lymph nodes disclosed hypercellular smears with some scattered eosinophils and polykaryocytes in a polymorphous lymphoid background. There were also fragmented vessel wails and activated endothelial cell clusters in the slightly necrotic background. The Warthin-Finkeldey type polykaryocytes had three to thirty nuclei and prominent nucleoli with cytoplasmic borders. Their nuclei were arranged in grapevine or ring shaped clusters. As these polykaryocytes could also be found in lymph nodes and extranodal tissues of both reactive and neoplastic lymphoid disorders, polykaryocytes themselves are clinically nonspecific. However, the morphologic features of the Warthin-Finkeldey type giant cells are quite different from the foreign body type or Langhans' type giant cells. When the characteristic cytologic features of Kimura's disease such as significant number of eosinophils in a background of lymphoid cells asd proliferation of vessels and endothelial cells are also observed in the smear, it is possible to suggest this diagnosis in the appropriate clinical setting.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.456-460
• /
• 1997

Several methods of aligning ring type cavities have been investigated for long time. The measurement of cavity transmission spectrum control is somewhat effective due to aligning cavity with measuring cavity loss at the same time. In this research, four mirrors are aligned and attached by the measurement of pulse width of the transmitted light. The intracavity loss is optimized to about 0.98%, giving the calculated total reflection coefficient of about 99.02%.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.48-55
• /
• 1982

In the present the strain gauge type torque transducers consist of solid shaft as sensor, slip ring, brush and bridge circuit as detecting circuit. So in the case of measuring the low-capacity torque, the error caused by technical mistake in mounting stain gauge on the small sensor and especially by contact resistance between slip ring and brush takes place more than the large sensor. Therefore in this study constant voltage in order to have no effect of contact resistance is supplied to the hollow shaft and Schrobron Bridge Circuit. Through the experiment good results were obtained as follows; linearity, hysterisis and zero drift as static characteristics is within 1% F.S respectively. Also when loading, zero drift is about 2% F.S.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.1
• /
• pp.46-50
• /
• 2011

The electrical insulation design of high voltage superconducting fault current limiters (SFCLs) should be confirmed to be applied for the stabilization of the power grid. This paper describes numerical analysis and AC dielectric experiments for developing high voltage SFCLs. The electric field distributions between applied high voltage part and ground were calculated by finite element method (FEM) simulation tool and AC criterion of liquid nitrogen at 200 kPa was calculated from correlation between the field utilization factor and FEM simulation results. This paper deals with ceonceptual insulation design of a 154 kV class single-phase no-inductively wound solenoid type SFCL which was focused on gap distance between the cryostat and superconducting coils. Furthermore, the shield ring effect was confirmed to reduce maximum electric field at applied high voltage part.

• Tribology and Lubricants
• /
• v.18 no.1
• /
• pp.34-41
• /
• 2002

This paper presents the contact thermal behaviors of mechanical seals depending on the contacting face geometry. Using the finite element analysis, the temperature distribution, thermal distortion and leakage have been analyzed as functions of sealing gap and rotating speed of the seal ring shaft. The FE results indicate that the inclined contacting face may be more effective and stable based on the results of thermal characteristic analysis if the seal ring has been designed with a same thermal capacity between conventional rectangular sealing faces and inclined seating surface of seal rings.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.762-770
• /
• 1999

A series of vitamin-containing Pt(II) complexes of the type [Pt (FMN) (L)] (FMN=flavin mononucleotide, L=ethylenediamine, 1,3-propanediamine, 1,4-bu-tanediamine) was synthesizd and characterized by IR, electronic absorption, elemental analysis and FAB=Mass. The coordination sites of FMN to Pt(II) ions were determined to be N(5) and O(6) with resultant chelate ring formation. Theses compounds have much better water solubility (30-35 mg/ml) than cisplatin (1 mg/ml). The anticancer activity of this vitamin-containing Pt(II) series was investigated by MTT assay against mouse and human leukemia cell lines in vitro. Among these compounds, FMN (1,4-butanediamine) Pt(II) having seven-membered ring structure as amine ligand showed moderate anticancer activity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.153-159
• /
• 2009

A CMOS frequency synthesizer for $5{\sim}6$ GHz UNII-band sub-harmonic direct-conversion receiver has been developed. For quadrature down-conversion with sub-harmonic mixing, octa-phase local oscillator (LO) signals are generated by an integer-N type phase-locked loop (PLL) frequency synthesizer. The complex timing issue of feedback divider of the PLL with large division ratio is solved by using multimodulus prescaler. Phase noise of the local oscillator signal is improved by employing the ring-type LC-tank oscillator and switching its tail current source. Implemented in a $0.18{\mu}m$ CMOS technology, the phase noise of the LO signal is lower than -80 dBc/Hz and -113 dBc/Hz at 100 kHz and 1MHz offset, respect-tively. The measured reference spur is lower than -70 dBc and the power consumption is 40 m W from a 1.8 V supply voltage.

• Nuclear Engineering and Technology
• /
• v.17 no.1
• /
• pp.34-44
• /
• 1985

The main purpose of this work is to study the effects of (1) configuration, size, and materials of electrodes, (2) flow pattern, (3) electrode position with respect to a dielectric boundary on the void fraction measurement and flow regime characterization by capacitance transducers. From the experimental results, relationships between the measured relative capacitance and void fraction are obtained for both annular and stratified flow systems under static condition, and this result is compared with theoretical predictions. From this study it can be concluded that (1) the strip-type electrodes are more sensitive than ring-type electrodes for both annular and stratified flows, (2) electrode size does not affect the relative capacitance vs. (1-$\alpha$) curve, and (3) electrode position is important for stratified flows but it has no effect on annular flows.