• 기본간호학회지
• /
• 제5권1호
• /
• pp.143-154
• /
• 1998

Background : There have been very few studies conducted on the number and type of microorganisms that remain on the ring finger after handwashing. This study was performed to investigate whether there were changes and differences in the type and number of microorganisms on the ring finger before and after handwashing. Method : The subjects of the study were 15 MICU and SICU staff nurses who were wearing rings. I swabbed two different fingers of the same hand with cotton balls. One finger which had a ring and the other with no ring. I swabbed the fingers of each subject three times(before handwashing, after handwashing with soap, and after handwashing with bethadine solution). After storing them for 48 hours in an incubator, I sent them to the laboratory and recorded the culture results. Results : There was no difference in the type of microorganism, but a major difference in the number of the microorganisms that existed on the finger ring. The results showed that there were much more microorganisms on the ring fingers than on the fingers that did not have rings both before and after handwashing. This tendency was consistent regardless of the handwashing agent. I therefore recommend that all nursing staff who work in general nursing units, as well as nurses who work in the ICU, remove their rings when taking care of the patients.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.869-872
• /
• 2007

In this study, in order to develop low temperature sintering ultrasonic nozzle, single-layer and multilayer ring-type piezoelectric actuators were manufactured using PMN-PNN-PZT ceramics, And then the electrical properties were investigated. A ring-type piezoelectric actuator was modeled by ATILA program using finite element method(FEM). The piezoelectric actuator dimension was $\Phi26.5$ (outer diameter), $\Phi12$ (inner diameter), 3.5 mm (thickness). By FEM analysis, resonant and anti-resonant frequencies were appeared as 56.7 kHz and 61.5 kHz. The displacement increased with the increases of the number of layer. Based on the result, ring-type multilayer piezoelectric actuators were manufactured at low co-firing temperature of $940^{\circ}C$. The resonant resistance decreased with the increases of the number of layer. And also, the capacitance increased with the increases of the number of layer. The mechanical quality factor (Qm) decreased with the increases of the number of layer.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.59-64
• /
• 1998

This paper presents the deformation characteristics of cam ring in a balanced type vane pump. Cam ring is operated in the high-pressure condition. Therefore the local deformation of cam ring affects the characteristics of compression, vane motion and noise and vibration. We analyzed the deformation of cam ring for the three types by using the finite element method. The deformed shape of cam ring and the effects of deformation on the compression are presented. As a result of analysis, we know that the right hole of the cam ring has advantage for reducing the pressure overshoot.

• Journal of electromagnetic engineering and science
• /
• 제5권2호
• /
• pp.92-96
• /
• 2005

This paper presents a novel microwave oscillator incorporating a simple microstrip ring type resonant cell as its terminating resonance component. Reduced chip size, higher dc-ac power efficiency, superior harmonic characteristics can be achieved from the introduction of a compact microstrip ring resonator cell. The oscillator provides a second harmonic suppression of 26.51 dB and the output power of 2.046 dBm at 2.11 GHz.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.104-110
• /
• 2003

A ring filter is proposed as a wide-banded filter. It consists of a ring and two short stubs, which are connected at 90$^{\circ}$ and 270$^{\circ}$ points of the ring. Since the termination impedance at 90$^{\circ}$ and 270$^{\circ}$ points of the ring and the characteristic impedance of the short stub have an effect on designing of it, the relation between them and bandwidths has been studied. Based on the study, two types of small-sized wideband CVT(constant VSWR-type impedance transformer)- and CCT(constant conductance-type impedance transformer)-ring filters are introduced, designed, simulated and one of two, a CCT -ring filter, is tested. The circumference of the ring can be reduced theoretically up to 60$^{\circ}$ and two of many cases having about 300$^{\circ}$ circumferences are simulated. The simulated results show more than 100 % fractional bandwidth, which can be obtained with more than 5 stages in conventional filter-design techniques. To test the designed CCT-ring filter, it has been fabricated in microstrip technology and the measured results show good agreement with the simulated ones, having more than 100 % fractional bandwidth.

• 한국안전학회지
• /
• 제22권3호
• /
• pp.45-50
• /
• 2007

In this study, reinforcing effects of umbrella-type shell roofs structures such as stadium, exhibition, auditorium and museum are analyzed. Umbrella-type shell roofs treated in this study are practical shapes of conical shells. The objective of this study is to analyze reinforcing effects of umbrella-type shell roofs with stiffeners. Various locations of stiffeners, that is, edge ring A, B, center ring, junction stringer and center stringer are presented and the effects of reinforcement is examined. Also, the reduction effects of roofs thickness by stiffeners are examined. It is shown that the thickness of roofs can be reduced about $20{\sim}30%$ by junction stringer and more than 60% by edge ring A.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1988년도 추계학술발표회 논문집
• /
• pp.114-117
• /
• 1988

In mobile radio communication system involving geostationary satellites the field intensity of electromagnetic wave varies with frequency shape and location of an obstacle between a tramamitter and a receiver. In this paper a ring type obstacle between the propagation paths is presented. On the basis of Fresnel diffraction theory, the field intensity varying with ring-type obstacle’s radius is obtained by computer simulation.]

• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1581-1586
• /
• 2012

평면형 마이크로스트립 공진기를 이용한 고주파 발진기의 단점인 위상잡음 특성을 개선하기 위해 본 논문에서는 링형 DGS 공진기를 제안하고, 이것을 이용하여 위상잡음 특성이 개선된 5.8GHz 대역의 발진기를 설계하였다. 링형 DGS 공진기는 $50{\Omega}$ 전송선로 밑면에 링 모양으로 식각된 접지면을 갖는 구조이다. 발진기의 특성은 5.8GHz 기본 주파수에서 6.1dBm의 출력과 -82.7 dBc@100kHz의 위상잡음 특성을 나타내었다. 이것은 ${\lambda}/4$ 마이크로스트립 공진기를 이용한 것보다 위상잡음 특성이 9.5dB 정도 개선되었다. 제안된 공진기의 구조적 장점은 에칭된 갭 사이에 버랙터 다이오드 실장이 용이하여 전압으로 공진기의 발진주파수를 가변할 수 있기 때문에 VCO의 설계가 가능하다. 본 논문의 발진기는 평면형 구조로 쉬운 작업공정과 소형화 특성 때문에 MIC 또는 MMIC 분야의 발진기 설계에 응용될 수 있을 것이다.

• 대한전자공학회논문지SD
• /
• 제38권7호
• /
• pp.479-485
• /
• 2001

본 논문에서는 광원이 불필요하며 단일 광섬유를 통하여 양방향 전송이 가능한 BS(base station)용 광송 수신기 모듈을 제안한다. 본 논문에서 제안하는 방식에서는 BS의 송신단에서 Ring type으로 구성된 Mach-Zehnder 변조기의 양방향 변조를 이용하여 CO(central office)에서 제공된 광원을 변조하여 다시 CO로 전송한다. Ring 타입으로 구성된 변조기의 등가모델을 도출하였으며, 등가모델과 측정결과가 매우 잘 일치함을 확인할 수 있었다. 또한 Ring type에서 Mach-Zehnder 변조기의 광학적인 대칭이 RF 신호 전송 특성에 중요한 영향을 미침을 확인할 수 있었다.

• 대한수학회보
• /
• 제59권5호
• /
• pp.1237-1246
• /
• 2022

In this paper, we introduce the concept of N-pure ideal as a generalization of pure ideal. Using this concept, a new and interesting type of rings is presented, we call it a mid ring. Also, we provide new characterizations for von Neumann regular and zero-dimensional rings. Moreover, some results about mp-ring are given. Finally, a characterization for mid rings is provided. Then it is shown that the class of mid rings is strictly between the class of reduced mp-rings (p.f. rings) and the class of mp-rings.