• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.118-128
• /
• 2017

Many countries have been developing BIM-based building code checking system and studies in the utilization of Industry Foundation Classes (IFC) in building code checking. IFC is the open standard of BIM format. Currently, there is a disadvantage that could not include all of the attribute for the regulations of each country and there is the problem with the interoperability of the different defined IFC approach between BIM software. This study focus on developing, derived object and property by comparing through domestic regulation and IFC2x3 specification provided by the buildingSMART and classified review type depending on the interoperability of derived information. According to classified review type, the IFC data structure was established and property mapping contents were developed by including BIM software compatible information and creating a type of review plan. When the developed property mapping contents are applied into BIM-based building code checking system, checking of the BIM data generated from various fields is made effective and thus improving the interoperability of information.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.177-183
• /
• 2011

One of the methodologies for the type-checking of an expression is the attribute grammar. But this attribute grammar is difficult to write because two attributes should be used with the full understanding of parsing steps. So this paper proposes a methodology to construct an expression attribute grammar easily. It shows the possibility to check the type of an expression with only one attribute through a grammar construction method.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.177-186
• /
• 2014

The gang-form widely used in apartment construction sites has advantages compared to scaffolding in preventing falling accidents. One problem, however, is that safety accidents associated with gang-form works repeatedly occur due to worker carelessness. In this study, hierarchical checking tables are provided to support safety management activities for the gang-form works at the sites. Through a survey of experts and analyses of case studies of construction accidents, 137 safety check items are classified by participant type based on a hierarchical safety check scheme. The applicability and effectiveness of the hierarchical checking tables was evaluated through interviews with experts. It was found that the hierarchical checking tables enabled each gang-form related participant to check his own safety management items, and provided a level-wise structure to site safety management systems.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.123-136
• /
• 2013

The Feature model can not be guaranteed the syntactic accuracy of its model and be difficult the validation using automatic tool for its syntax, because this model is expressed by a graphical and informal structure in itself. Therefore, there is a need to formalize and check for the feature model, to precisely define syntax for construct of the model. This paper presents a Z formal specification and a model checking mechanism of the feature model to guarantee the correctness of the model. It first defines the translation rules between feature model and Z, and then converts the syntax of the feature model into the Z schema specification by applying these rules. Finally, the Z schema specification is checked syntax, type, and domain errors using the Z/Eves validation tool to assure the correctness of its specification, With the use of the proposed method, we may express more precisely the construct of the feature model. Moreover the domain analyst are able to usefully verify the errors of the generated feature model.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.352-359
• /
• 2000

In this paper, the method is used that each system isolates the part in which faults are occurred in case of fault occurrence since total system is designed in the type of hot standby sparing system construction and self-checking circuit in each system is attached to the memory being of the high failure rate in common communication system. Thus reliability and availability in system are improved. In this thesis, self-checking circuit was designed using 2 out of 6 code and didn't have any effect to the system operation. For the purpose of verification, each system attached with self-checking circuit was simulated through fault injection arid the continuity of each system in hot standby sparing system was tested in case that the system was switched when faults in the system were occurred.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.1
• /
• pp.37-45
• /
• 1990

In this paper, a knowledge base editor is presented as a supporting environment for an expert system building tool, OPS5. The knowledge base editor is especially useful for the fast and easy development of a knowledge base when the OPS5 production language is used. This knowledge base editor has some special facilities such as syntax and type checking, rule browsing and automatic bokkeeping. The syntax and type checking provides the facilities to find syntax and type errors in an edited knowledge base, respectively. The rule browsing facility offers various pattern matching schemes to see the causes and effects of a concerned rule. Automatic bookkeeping keeps the updated date and user name of a rule for the later reference whenever a user adds or changes a rule.

• East Asian mathematical journal
• /
• v.39 no.3
• /
• pp.369-376
• /
• 2023

In this paper, we provide Sawyer type conditions on a pair of weights so that the dyadic paraproduct π_b is bounded from L²(u) into L²(v). The conditions can be obtained by checking the boundedness of the dyadic paraproduct on a collection of test functions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.222-227
• /
• 1998

The paper proposes a new method for measuring the flow ripple generated by an axial piston pump and motor in a hydrostatic transmission. The method is based on dynamic characteristics between pressure and flow ripple in the pipeline. Also, the self-checking functions develop for the evaluation of accuracy and dynamic response of estimated results by the method proposed here. The experiment carry out open circuit type hydrostatic transmission. By using the self-checking functions, the validity of the method is investigated by comparison with the measured and estimated flow and pressure ripples, and good agreement is achieved.

• Journal of the Chungcheong Mathematical Society
• /
• v.23 no.4
• /
• pp.609-616
• /
• 2010

We characterize extreme rays of the cone $\mathbb{T}$ of all positive semi-definite block matrices whose partial transposes are also positive semi-definite. We also construct an algorithm checking whether a given PPTES generates an extreme ray in the cone $\mathbb{T}$ or not. Using this algorithm, we give an example of $4{\otimes}4$ PPT entangle state of the type (5, 5), which generates extreme ray of the cone $\mathbb{T}$.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1241-1246
• /
• 2004

The verification confirms a correspondence between requirements and a specification before implementing. The problem in the formal method verifying a protocol specification using model checking is that the protocol behaviors must be always specified in L TS(Label Transition System). But if Region Automata is applied to the model checking, it is enable to verify whether properties are true on specification specified in I/O FSM(Input/Output Finite State Machine) as well as LTS. In this paper, we verify the correctness of rail signal control protocol type 1 specified in I/O FSM by using model checking method and region automata. This removes many errors and ambiguities of an informal method used in the past and saves down expenditures and times required in the protocol development. Therefore it is expected that there will be an increase in safety, reliability and efficiency in terms of the maintenance of the signaling system by using the proposed verification methods.