• 사상체질의학회지
• /
• 제25권4호
• /
• pp.384-395
• /
• 2013

Objectives We report a series of 3 chronic tension-type headache cases who were constitutionally typed as the Soeum type, Taeeum type and treated with Dangguibaekhaoguanjung-tang, Chungshimyeonja-tang or Chunghyulganggui-tang. Methods In treating 1 patient who was constitutionally typed as the Soeum type, Case 1 fell into the category of the Taeeum symptomatology, 2 patients who were constitutionally typed as the Taeeum type, Case 2 and Case 3 fell into the category of Dry-Heat symptomatology. Each patient was given Sasang medication according to protocol: Dangguibaekhaoguanjung-tang to Case 1, Chungshimyeonja-tang to Case 2, Chunghyulganggui-tang to Case 3. On admission day and approximately 2 weeks later, patients evaluated their pain and quality of life using SF-36 and HIT-6. The patients symptoms were observed daily and NRS scores were recorded daily. Results and Conclusions 2 Patients(Case1, Case2) showed improvement in their NRS scores, SF-36 scores and HIT-6 scores. 1 patient(Case3) showed improvement in NRS scores, but worse SF-36 scores and no improvement in HIT-6 scores. Treating chronic tension-type headache based on Sasang Constitutional therapy was found to be effective for managing pain. The treatment protocol suggested in this investigation should be explored and verified in future studies.

• 대한전자공학회논문지TE
• /
• 제39권1호
• /
• pp.9-15
• /
• 2002

본 논문은 청색 유기 EL 소자를 진공증착법으로 제작하여 그 특성을 분석하였다. 발광층 물질(A1q/sub 3/)에 게스트물질(Type I-TPB와 Type II-DPA)의 도핑농도(0.5∼2 wt%)를 변화시켜 청색발광소자를 제작하여 전기적, 광학적 특성을 조사하였다. Alq3에 도펀트의 농도를 증가함에 따라 청색에 해당하는 색좌표 점으로 이동하였다. Type I이 Type II의 경우보다 동작개시전압 및 구동전압이 낮게 나타났으며 휘도에서는 Type II가 밝게 나타났다. Alq/sub 3/에 DPA(2wt%)를 도펀트로 사용한 소자의 경우 인가전압 15V에서 휘도는 1282cd/m/sup 2/, 최대발광 파장은 476nm, 색좌표는(0.1273, 0.0672)으로 우수한 특성을 나타내었다.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.181-196
• /
• 2016

This study intended to suggest criteria for selection of subjects by lower body shape types necessary for evaluating slacks. For this, the characteristics were examined by lower body parts which would influence the fit of slacks on 3D human body shape data of the front and sides of the lower body for lower body shaping. The frequency of subjects by lower body shape types and the boundary points for discrimination of each type were suggested so that they could be available in selecting subjects. Using the data from Size Korea(2004), indirect measurement values measured on the front and sides of the lower body among 3D human body shape data of 175 subjects were analyzed. Their height, waist, and hip circumference fell under the range of standard deviation based on the mean of women aged 18~24 years, and then lower body shaping was conducted by combining the front and side shapes of the lower body. The front of the lower body was classified into four sections: average waist/average hip type(F1), average waist/narrow hip tyle(F2), narrow waist/narrow hip type(F3) and narrow waist/wide hip type(F4) and the sides of the lower body were divided into four sections: average abdomen/average hip type(S1), flat abdomen/average hip type(S2), average abdomen/protrude hip type(S3)and round abdomen/flat hip type(S4), and thus total 16 lower body types were created by cross analysis. Besides, discriminant analysis suggested the boundary points for each shape type of the front and sides of the lower body as a criterion for deciding lower body shape type of each subject

• BMB Reports
• /
• 제41권7호
• /
• pp.542-547
• /
• 2008

D-type cyclins control the onset of cell division and the response to extracellular signals during the G1 phase. In this study, we transformed a D-type cyclin gene, Nicta;CycD3;4, from Nicotiana tabacum using an Agrobacterium-mediated method. A predicted 1.1 kb cyclin gene was present in all of the transgenic plants, but not in wild-type. Northern analyses showed that the expression level of the Nicta;CycD3;4 gene in all of the transgenic plants was strong when compared to the wild-type plants, suggesting that Nicta;CycD3;4 gene driven by the CaMV 35S promoter was being overexpressed. Our results revealed that transgenic plants overexpressing Nicta;CycD3;4 had an accelerated growth rate when compared to wild-type plants, and that the transgenic plants exhibited a smaller cell size and a decreased cell population in young leaves when compared to wild-type plants.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.429-436
• /
• 2011

In this study, we have experimented with 9 players at the national delegate level. Although there were some differences in the average effects of 3 types of one-two straight movements after the application of wheel axle, there were no statistical differences in the case of surface reacting forces, electromyograms, and impact forces. When the right fist was impacted using the one-two straight movements and the wheel axle was applied with 3 segmentations, high impact forces were obtained for the pronation in the following order-72.01 $m/s^2$ (type 2), 70.93 $m/s^2$ (type 3), and 58.19 $m/s^2$ (type 1). Higher values of the surface reacting force were found for type 1 that did not exhibit pronation in the left foot, whereas in the case of the vertical direction of the right foot, type 2 with pronation exhibited higher values and impact forces. In the right electromyogram, high impact forces due to the activation of the muscular electric potential were obtained for lumbar erector (LE) spinae and triceps brachii (TB) with type 1; LE spina, latissimus dosi (LD), and upper trapezius (UT) with type 2; and brachioradialis (BR), UT, and rectus abdominal (RA) with type 3. Due to pronation and complex motions of the 3 pronation segmentations, the efficiency was higher for impacts due to one-two straight movements.

• 한국태양에너지학회 논문집
• /
• 제37권6호
• /
• pp.1-12
• /
• 2017

The DC link of Grid-Connected 3-Phase 3-Level T-type Photovoltaic PCS (PV-PCS) consists of two series connected capacitors for using their neutral voltage. The mismatch between two capacitor characteristics and transient states happened in load change cause the imbalance of neutral voltage. As a result, PV-PCS performance is degraded and the system becomes unstable. In this paper, a mathematical model for analyzing the imbalance of neutral voltage is derived and a compensation method using offset voltage is proposed, where offset voltage adjusts the applying time of P-type and N-type small vectors. The validity of the proposed methods is verified by simulation and experiment.

• Composites Research
• /
• 제19권4호
• /
• pp.31-38
• /
• 2006

본 연구에서는 열탄성 해석과 복합재/알루미늄 링시편 실험을 통해 성형 온도와 자긴 압력이 복합재와 알루미늄 라이너로 구성된 Type 3 극저온 추진제 탱크에 미치는 영향을 살펴보았다. 우선 Type 3 탱크의 온도분포를 구한 뒤 이를 경계조건으로 사용하여 성형온도와 자긴 압력의 영향을 고려한 탄성해석을 수행하였다. 그 결과 복합재의 성형온도가 증가할수록 복합재와 알루미늄 라이너에 각각 잔류압축응력과 잔류인장응력이 증가하였다. 한편 자긴 압력은 극저온 환경에 의해 유발된 잔류열응력의 감소를 초래하였으며 자긴 압력의 크기가 증가할수록 이러한 경향은 두드러졌다. 이러한 성형 온도와 자긴 압력의 영향은 Type 3 극저온 추진제 탱크의 설계 및 제작 단계에 반드시 고려되어야 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.14-26
• /
• 2020

We categorize partnership types between network operators and a global video streaming or over-the-top service provider, Netflix from 2011 to the first quarter 2018. The options are based on the integration of over-the-top (OTT), Netflix with pay TV and telecommunication operators in the form of carrier billing, access to over-the-top (OTT) via devices or the development of their tariff plans. Options of the Type 3, 'cooperation' or the Type 4, 'agreement' entails a kind of the technical involvement between two partners and commercial agreement. The types of partnership are evolving from one to others. Some partnerships have characteristics of more than one type. The majority of technical or service integration cooperation of Type 3 entail bundling and marketing promotion of Type 2 and Type 1. Similarly, the 'agreement' of Type 4, co-branded or white-label service initiative entail tariff or device user interface (UI) integration of the 'cooperation' of Type 3 and joint marketing initiatives of Type 1.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.53-59
• /
• 2011

시험 시편은 1개의 횡목과 2개의 종목이 직결나사못 2개로 연결된 접합부(Type-A)와 2개의 횡목과 2개의 종목이 4개의 직결나사못으로 연결된 접합부(Type-B)를 제작하였다. Type-B를 보강하기 위하여 횡목간의 연결부를 끝면거리 5D로 반턱이음하여 2개의 직결나사를 사용한 접합부(Type-C), 끝면거리 10D로 반턱이음한 접합부(Type-C1)와 끝면거리 10D, 직결나사 3개를 사용한 접합부(Type-C2)를 제작하였다. 압축형 전단 내력 시험결과 Type-B의 내력을 기준으로 Type-B를 보완한 Type-C는 약 30% 감소하였고, Type-C에서 끝면거리를 증가시킨 Type-C1은 Type-B와 비슷한 내력을 보였으며, Type-C1에서 직결나사못의 개수를 3개로 증가시킨 Type-C2는 Type-C1과 비교하여 1.28배 내력을 나타냈다. 기존 정각재를 이용한 옹벽의 접합부 중 긴 횡목과 짧은 횡목이 2개의 종목과 연결되는 접합부는 내력이 저하되기 때문에 이를 대체하기 위하여 실험을 실시하였다. 따라서 Type-B를 Type-C2로 대체한다면 옹벽 시공시 직결나사못에 의한 목재의 할렬, 파단과 시공시간이 줄어들고 접합 내력이 증가할 것으로 기대된다.

• 한국자기학회지
• /
• 제19권1호
• /
• pp.12-16
• /
• 2009

Z-Type 바리움 페라이트($Ba_{3}Co_{0.8}Zn_{1.2}Fe_{24}O_{41}$)를 공침법으로 제조하고 결정구조와 자기적 성질을 조사하였다. $Ba_{3+{\delta}}Co_{0.8}Zn_{1.2}Fe_{24}O_{41}$(${\delta}$ = 3, 5, 7, 13 wt%)와 $Ba_{3}Co_{0.8}Zn_{1.2}Fe_{{24}+{\delta}}O_{41}$(${\delta}$ = 5, 7, 10 wt%)의 조성을 가진 분말의 ${\delta}$ 값에 따른 자기적 성질의 변화를 조사하였다. 제조된 모든 바리움 페라이트에는 Z-type으로 상전이 하지 않은 M-type이 상당량 잔류하고 있었다. 포화자화는 Ba와 Fe의 과잉 첨가량 ${\delta}$가 각각 7 wt%와 5 wt% 일 때 최대로 나타났고 보자력은 조사된 모든 분말에서 다소 높게 나타났다. 높은 보자력은 M-type이 잔류하기 때문이다. 과잉의 Ba와 Fe 첨가에 따른 결정구조의 변화는 없었다. Z-type 바리움 페라이트의 연자성 특성을 향상시키기 위해서는 M-type이 Z-type 형성온도에서 상전이가 일어나도록 해야 함을 알았다.