• 한국컴퓨터정보학회논문지
• /
• 제19권3호
• /
• pp.11-16
• /
• 2014

본 논문은 예측제어기를 이용하여 2휠 로봇의 실시간 균형을 유지할 수 있는 자세 제어에 대해 연구하였다. 또한 역방향 진자 제어는 로봇이 진행하는 동안 균형을 유지하기 위하여 도입되었다. 본 논문에서 구현에 사용한 프로세서는 dsPIC30F4013 임베디드 프로세서이며 자체 균형 알고리즘을 설계하고 구현 하는 것이다. 본 연구에서 ARS는 2축의 자이로 각(roll, pitch)과 3축의 가속도계 값(x, y, z)값으로 자세를 계산하도록 하였다. 따라서 본 연구에서는 외란에 대한 자세의 불균형을 극복하기 위한 예측제어기를 제안했으며 이를 원격 시스템의 제어문제에 도입하여 2바퀴 로봇의 선형 제어기와 예측제어기를 결합한 시스템의 시뮬레이션을 수행하였다. 또한 강인한 특성을 실현하기 위해 목표 필터루프를 설계하고 강인도-안정성을 만족하는 제어기를 설계하므로 제어시스템의 안정성을 향상시키고 시스템의 성능의 저하를 최소화함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.142-147
• /
• 1988

Free-path-type guidance system does not need a hardwired path in the environment so that it gives a mobile robot a flexible path. ln this study to achieve the free-path-type guidance system for a mobile robot which is steered by the differential steering of both drive forewheels, position recognition systems are constructed using odometer system as an internal position sensor. Two odometer systems, a auxiliary wheel odometer and a 2-encoder odometer system are constructed and path following algorithms using these odometer systems are designed and experimented. PID control type is adopted in the path following algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.44-44
• /
• 2000

Firstly, kinematic model of various type of wheels which includesskidding and skidding friction are presented. Tend, the transfer method of generalized coordinates which is useful to model the parallel mechanisms, can be applied to mobile robot by including such friction terms. Particularly, by appling the modeling method to mobile robot consisting of two conventional wheels and one caster wheel, forword/reverse kinematic modeling could be obtained without using pseudoinverse solutions.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.144-149
• /
• 2019

This paper describes the results of a study on the unmanned maintenance robot that simultaneously performs the cleaning and inspection of the photovoltaic panels. The robot has a special adsorptive device, an infrared sensor, a vacuum level sensor and a camera. The robot uses two SSC (Sliding Suction Cup) adsorptive devices to move up and down the slope. First, the forces generated when the robot moves up the slope are mechanically analyzed, and the required design and control of the adsorption system are suggested. The robot was designed and manufactured to operate stably by using the presented results. Next, the normal force between the panel and the wheel was measured to confirm that the robot was manufactured and operated as intended, and the robot motion was tested on the inclined panel. It has been proven that robots are well designed and built to clean and inspect sloped panels.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.62-67
• /
• 2002

This paper presents a new approach to the design of cruise control system of a mobile robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy-neural network and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized loaming architecture. It is Proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tucking of the speed and azimuth of a mobile robot driven by two independent wheels.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.207-212
• /
• 2004

This paper presents a new approach to the design of cruise control system of a mobile robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy neural network, and back propagation algorithm to train the fuzzy neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tracking of the speed and azimuth of a mobile robot driven by two independent wheels.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.736-740
• /
• 2014

This paper presents the driving and balancing control of an entertainment robot vehicle that can carry two persons. The entertainment robot vehicle is built with the purpose of carrying passengers with two wheels. It has two driving modes: a balancing mode with two wheels and a driving mode with three wheels. Three cases of different modes are verified by experimental studies. Firstly, a driving mode is tested with two passengers to check the functionality of the vehicle. Secondly, the balancing control performance is tested. Lastly, the balancing control performance under the disturbance is tested.

• 전자공학회논문지
• /
• 제51권2호
• /
• pp.190-196
• /
• 2014

본 논문에서는 밸런싱 로봇의 동역학적 모델의 해석으로부터 기울기와 조향이 독립되어 있어 서로 영향을 받지 않는 것을 증명하고, 다변수 시스템에 적합한 제어기로써 두 개의 최적 LQR 제어기 구조를 갖는 제어시스템을 제안하였다. 또한 제안한 제어시스템의 성능을 입증하기 위하여 밸런싱 로봇의 자세제어에 적용하여 모의실험과 실험을 수행하였고, PID 제어기와의 비교평가를 통하여 그 우수성을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2066-2071
• /
• 2003

In this paper, we identify the isotropic configurations of an omnidirectional mobile robot with three caster wheels, depending on the selection of actuated joints. First, We obtain the kinematic model of a caster wheeled omnidirectional mobile robot(COMR) without matrix inversion. For a given task velocity, the instantaneous motion of each wheel is decomposed into two orthogonal instantaneous motions of the steering and the rotating joints. Second, with the characteristic length introduced, we derive the isotropy conditions of a COMR having $n({\ge}3)$ actuated joints, which are imposed on two Jacobian matrices, $A{\in}R^{n{\times}3}$ and $B{\in}R^{6{\times}6}$. Under the condition of $B{\propto}I_6$, three caster wheels should have identical structure with the length of the steering link equal to the radius of the wheel. Third, depending on the selection of actuated joints, we derive the conditions for $A^t$ $A{\propto}I_3$ and identify the isotropic configurations of a COMR. All possible actuation sets with different number of actuated joints and different combination of rotating and steering joins are considered.

• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1067-1072
• /
• 2014

The ability to overcome obstacles is necessary for field robots for various applications including the ability to climb stairs. While much research has been performed focusing on overcoming obstacles, the resulting robots do not have sufficient ability to overcome obstacles such as stairs. In this research, the purpose is to overcome relatively large obstacles by flipping locomotion through the modification of the stair climbing robotic platform of the previous research. We propose two scenarios to overcome large obstacles: a rear wheel driving system and an elevation system using a ball screw. The research is performed based on static analyses on obstacle-climbing. As the simulation results indicate, we determined the optimal posture of the robot for climbing obstacles for rear wheel driving. Also, an elevation system is analyzed for obstacle climbing. Between the two scenarios an elevation system is determined to reduce the operating torque of the actuator, and the prototype was recently assembled. The climbing ability of the robotic platform is verified. We expect the application area for this robotic platform will be in accident areas of nuclear power plants.