• 제목/요약/키워드: two-step reference selection

검색결과 8건 처리시간 0.029초

Disparity-based Error Concealment for Stereoscopic Images with Superpixel Segmentation

  • Zhang, Yizhang;Tang, Guijin;Liu, Xiaohua;Sun, Changming
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권9호
    • /
    • pp.4375-4388
    • /
    • 2018
  • To solve the problem of transmission errors in stereoscopic images, this paper proposes a novel error concealment (EC) method using superpixel segmentation and adaptive disparity selection (SSADS). Our algorithm consists of two steps. The first step is disparity estimation for each pixel in a reference image. In this step, the numbers of superpixel segmentation labels of stereoscopic images are used as a new constraint for disparity matching to reduce the effect of mismatching. The second step is disparity selection for a lost block. In this step, a strategy based on boundary smoothness is proposed to adaptively select the optimal disparity which is used for error concealment. Experimental results demonstrate that compared with other methods, the proposed method has significant advantages in both objective and subjective quality assessment.

A Range-Scaled 13b 100 MS/s 0.13 um CMOS SHA-Free ADC Based on a Single Reference

  • Hwang, Dong-Hyun;Song, Jung-Eun;Nam, Sang-Pil;Kim, Hyo-Jin;An, Tai-Ji;Kim, Kwang-Soo;Lee, Seung-Hoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권2호
    • /
    • pp.98-107
    • /
    • 2013
  • This work describes a 13b 100 MS/s 0.13 um CMOS four-stage pipeline ADC for 3G communication systems. The proposed SHA-free ADC employs a range-scaling technique based on switched-capacitor circuits to properly handle a wide input range of $2V_{P-P}$ using a single on-chip reference of $1V_{P-P}$. The proposed range scaling makes the reference buffers keep a sufficient voltage headroom and doubles the offset tolerance of a latched comparator in the flash ADC1 with a doubled input range. A two-step reference selection technique in the back-end 5b flash ADC reduces both power dissipation and chip area by 50%. The prototype ADC in a 0.13 um CMOS demonstrates the measured differential and integral nonlinearities within 0.57 LSB and 0.99 LSB, respectively. The ADC shows a maximum signal-to-noise-and-distortion ratio of 64.6 dB and a maximum spurious-free dynamic range of 74.0 dB at 100 MS/s, respectively. The ADC with an active die area of 1.2 $mm^2$ consumes 145.6 mW including high-speed reference buffers and 91 mW excluding buffers at 100 MS/s and a 1.3 V supply voltage.

패션산업 인턴십 프로그램 개발에 관한 연구 - 패션기업과 정부의 인턴십 활성화 방안을 중심으로 - (A Study on Internship Program Development for Fashion Industry - Focused on Internship Activation Method of Fashion Industry and Government-)

  • 유지헌;정상길
    • 복식문화연구
    • /
    • 제13권5호
    • /
    • pp.699-711
    • /
    • 2005
  • This study was following one of 'A study on the consciousness of fashion industries internship'. The purposes of this study were to develop the internship program which focused on practical use to introduce and carry out for fashion industries, and secondly to propose some regime for government to activate fashion internship. Reference searching method and depth interviewing method were used for this study. The results were as follows : Fashion industry internship was grouped into two classes, 'on-the-job training'; educating students fields and 'talent hunting'; selecting good persons. Internship of industry-academic world was classified into two types; the one is 'credit type' which has curriculums between universities and industries and the other is 'non-credit type' which has not any credit and is operated by industry own system. This study provided the development courses of pragmatic program to perform internship systematically and it also provided the program models for guide line in fashion industries. Six grades such as ready step, introduction step, selection step, management step, evaluation step and feed-back step were proposed for the internship program development steps of fashion industries. A virtual organization, 'The Fashion Industry and Academy Association' was proposed as a policy for activating internship between universities, industries and government.

  • PDF

A Position based Kinematic Method for the Analysis of Human Gait

  • Choi Ahn Ryul;Rim Yong Hoon;Kim Youn Soo;Mun Joung Hwan
    • Journal of Mechanical Science and Technology
    • /
    • 제19권10호
    • /
    • pp.1919-1931
    • /
    • 2005
  • Human joint motion can be kinematically described in three planes, typically the frontal, sagittal, and transverse, and related to experimentally measured data. The selection of reference systems is a prerequisite for accurate kinematic analysis and resulting development of the equations of motion. Moreover, the development of analysis techniques for the minimization of errors, due to skin movement or body deformation, during experiments involving human locomotion is a critically important step, without which accurate results in this type of experiment are an impossibility. The traditional kinematic analysis method is the Angular-based method (ABM), which utilizes the Euler angle or the Bryant angle. However, this analysis method tends to increase cumulative errors due to skin movement. Therefore, the objective of this study was to propose a new kinematic analysis method, Position-based method (PBM), which directly applies position displacement data to represent locomotion. The PBM presented here was designed to minimize cumulative errors via considerations of angle changes and translational motion between markers occurring due to skin movements. In order to verify the efficacy and accuracy of the developed PBM, the mean value of joint dislocation at the knee during one gait cycle and the pattern of three dimensional translation motion of the tibiofemoral joint at the knee, in both flexion and extension, were accessed via ABM and via new method, PBM, with a Local Reference system (LRS) and Segmental Reference system (SRS), and then the data were compared between the two techniques. Our results indicate that the proposed PBM resulted in improved accuracy in terms of motion analysis, as compared to ABM, with the LRS and SRS.

특징점의 연결정보를 이용한 지문인식 (Fingerprint Recognition using Linking Information of Minutiae)

  • 차정희;장석우;김계영;최형일
    • 정보처리학회논문지B
    • /
    • 제10B권7호
    • /
    • pp.815-822
    • /
    • 2003
  • 지문영상의 품질 향상과 특징점 정합은 자동 지문인식 시스템의 중요한 두 단계이다. 본 논문에서는 특징점의 연결정보를 사용한 지문인식 기법을 제안한다. 인식 과정은 전처리와 특징점 추출, 그리고 특징점 pairing을 기반으로 한 정합의 세 단계로 이루어져 있다. 정확성을 위해 세선화된 이미지로부터 지문의 특징점을 추출한 후에, 특징점의 연결정보를 사용한 정합과정을 소개한다. 특징점 정합과정에서 연결정보를 사용하는 것은 간단하지만 정확한 방법이며, 두 지문의 비교단계에서 낮은 비용으로 기준 특징점 쌍을 선택하는 문제를 해결해 준다. 알고리즘은 지문의 회전과 이동에 무관하다. 정합 알고리즘은 반도체 칩방식 지문 입력장치로부터 획득한 500개의 지문영상으로 실험하였으며, 실험 결과는 기존 방법보다 오인식율은 줄어들고 정확도는 증가하였음을 보여준다.

라이다 자료를 이용한 하천지역 인공 제방선 추출 (Construction of a artificial levee line in river zones using LiDAR Data)

  • 정윤재;박현철;조명희
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.185-185
    • /
    • 2011
  • Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.

  • PDF

저전력 모바일 응용을 위한 12비트 100MS/s 1V 24mW 0.13um CMOS A/D 변환기 (A 12b 100MS/s 1V 24mW 0.13um CMOS ADC for Low-Power Mobile Applications)

  • 박승재;구병우;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제47권8호
    • /
    • pp.56-63
    • /
    • 2010
  • 본 논문에서는 DVB-H, DVB-T, SDMB 및 TDMB 응용과 같이 고해상도, 저전력 및 소면적을 동시에 요구하는 모바일 영상 시스템 응용을 위한 12비트 100MS/s 0.13um CMOS ADC를 제안한다. 제안하는 ADC는 3단 파이프라인 구조를 사용하여 고해상도 및 높은 신호처리속도와 함께 전력 소모 및 면적을 최적화하였다. 첫 번째 및 두 번째 MDAC 사이에 적용된 증폭기 공유기법은 기존의 증폭기 공유 시 입력 단을 리셋하지 않아 발생하였던 메모리 효과를 제거하기 위해 두개의 입력 단을 사용하였으며, 위상 일부가 중첩된 클록을 사용하여 스위칭 동안 발생하는 글리치를 최소화하여 출력 신호의 정착 시간 지연 문제를 줄였다. 마지막 단으로 사용되는 6비트 FLASH ADC에는 효과적인 2단 기준 전압 선택 기법을 적용하여 소비되는 전력 소모 및 면적을 줄였다. 제안하는 ADC는 0.13um 1P7M CMOS 공정으로 제작되었으며, 면적은 0.92 $mm^2$이고, 측정된 DNL 및 INL은 각각 0.40LSB, 1.79LSB의 최대값을 갖으며, 동적성능은 100MS/s의 동작속도에서 각각 최대 60.0dB의 SNDR과 72.4dB의 SFDR을 보여준다. 전력 소모는 1.0V 전원 전압 및 100MS/s 동작속도에서 24mW이며, FOM은 0.29pJ/conv.으로 최근까지 발표된 12비트 100MS/s급 ADC 중에서 가장 우수한 성능을 보여준다.

재앙적 예술과 그 도구화된 선별체계: 헌터 조너킨과 댄 퍼잡스키의 작품으로부터 (Catastrophic Art and Its Instrumentalized Selection System : From work by Hunter Jonakin and Dan Perjovschi)

  • 심상용
    • 미술이론과 현장
    • /
    • 제13호
    • /
    • pp.73-95
    • /
    • 2012
  • In terms of element and process, art today has already been fully systemized, yet tends to become even more systemized. All phases of creation and exhibition, appreciation and education, promotion and marketing are planned, adjusted, and decided within the order of a globalized, networked system. Each phase is executed, depending on the system of management and control and diverse means corresponding to the system. From the step of education, artists are guided to determine their styles and not be motivated by their desire to become star artists or running counter to mainstream tendency and fashion. In the process of planning an exhibition, the level of artist awareness is considered more significant than work quality. It is impossible to avoid such systems and institutions today. No one can escape or be freed from the influence of such system. This discussion addresses a serious distortion in the selection system as part of the system connotatively called "art museum system," especially to evaluate artistic achievement and aesthetic quality. Called "studio system" or "art star system," the system distinguishes successful minority from failed absolute majority and justifies the results, deciding discriminative compensations. The discussion begins from work by Hunter Jonakin and Dan Perjovschi. The key point of this discussion is not their art worlds but the shared truth referred by the two as the collusive "art market" and "art star system." Through works based on their experiences, the two artists refer to these systems which restrict and confine them. Jonakin's Jeff Koons Must Die! is avideo game conveying a critical comment on authoritative operation of the museum system and star system. In this work, participants, whether viewer or artist, are destined to lose: the game is unwinnable. Players take the role of a person locked in a museum where artist Jeff Koons' retrospective is held. The player can either look around and quietly observe the works, which causes a game-over, or he can blow the classical paintings to pieces and cause the artist Koons to come out and reprimand the player, also resulting in a game-over. Like Jonakin, Dan Perjovschi's some drawings also focuses on the status of the artist shrunken by the system. Most artists are ruined in a process of competition to survive within the museum system. As John Burger properly pointed out, out of the art systems today, public collections (art museums) and private collections have become "something unbearable." The system justifies the selection system of art stars and its frame of reference, disregarding the problem of producing numerable victims in its process. What should be underlined above all else is that the present selection system seriously shrinks art's creative function and its function of generating meaning. In this situation, art might fall to the level of entertainment, accessible to more people and compromising with popularity. This discussion is based on assumption and consciousness on the matter that this situation might cause catastrophic results for not only explicit victims of the system but also winners, or ones defined as winners. The system of art is probably possible only by desire or distortion stemmed from such desire. The system can be flourished only under the economic system of avarice: quantitatively expanding economy, abundant style, resort economy in Venice and Miami, and luxurious shopping malls with up-to-date facilities. The catastrophe here is ongoing, not a sudden emergence, and dynamic, leading the system itself to a devastating end.

  • PDF