• 한국전자파학회논문지
• /
• 제23권3호
• /
• pp.306-313
• /
• 2012

본 논문에서는 UMTS Tx 대역(1.92~1.98 GHz)과 Rx 대역(2.11~2.17 GHz)에서 동작하는 이중 대역 E 슬롯 마이크로스트립 패치 안테나 사이의 격리도 향상을 위한 EBG 구조를 제안하였다. 제안된 EBG 구조는 이중 대역에서 두 안테나 사이의 격리도를 향상시키기 위하여 서로 다른 크기의 변형된 버섯 모양(mushroom-type) 구조로 단위 셀들을 배열하였다. 제안된 구조는 패치 안테나와 접지 면을 공유하지 않으며, 설계되어진 단위 셀의 크기는 각각 $15.6mm{\times}4mm$, $17.4mm{\times}4mm$이다. 제안된 안테나의 전체 크기는 $210.5mm{\times}117mm$이고, FR-4(비유전율=4.6, 기판 두께= 3.93 mm) 기판 상에 설계되어졌다. 제작된 안테나의 측정 결과, 제안된 EBG 구조의 사용으로 UMTS Tx 대역과 Rx 대역에서 각각 9 dB, 12 dB의 격리도 향상을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.453-458
• /
• 2004

This study proposes a new two-level condensation scheme for the construction of a reduced system. In the first step, the candidate area is selected for the construction of the reduced system by energy estimation in element-level. In the second step, primary degrees of freedom are selected by sequential elimination from the candidate degrees of freedom linked to the selected elements. Numerical examples demonstrate that the proposed method saves the computational cost effectively and provides a reduced system which predicts the eigenvalues accurately. Moreover, the well-constructed reduced system can present the reliable behavior of the structure under arbitrary dynamic loads comparing to that of global system. Time integration in a reduced system can save the computing time remarkably. Through a few numerical examples, the efficiency and reliability of the proposed scheme are verified.

• Structural Engineering and Mechanics
• /
• 제6권7호
• /
• pp.801-815
• /
• 1998

An overview of an analytical model to predict mortar joint failure in unreinforced masonry (URM) structures is presented. The validity of the model is established by comparison with experimental results at element level as well as structure level. This model is then used to study the behavior of URM walls and two commonly used retrofitting schemes. Finally, effectiveness of the two retrofitting schemes in increasing strength and stiffness of existing URM walls is discussed.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.879-886
• /
• 1998

It is very important to understand the vibration and noise characteristics of a structure to developed quiet machines and lessen their noise. In this paper, the vibration and sound radiation characteristics of a simple and a bar-stiffened plate have been investigated using numerical and experimental techniques. In numerical process, FEM analysis has been performed for the vibration level ; the time-space squared and averaged velocity and BEM analysis for sound radiation parameters ; sound power and radiation efficiency. In experimental process, FFT signal processing method has been used. While a power from an exiciter is applied to the structure by using a point contact, sound intensity and vibration level has been measured. Based on these two data, the radiation efficiency has been calculated. Results show that the radiation efficiency for the stiffened structure increases compared to the simple plate, due to the extra edges provided by the stiffener.

• Tribology and Lubricants
• /
• 제26권2호
• /
• pp.129-135
• /
• 2010

Geckos have a unique ability to cling to ceilings and walls utilizing dry adhesion. Their foot pads are covered by a large number of small hairs (setae) that contain many branches per seta with a lower level of spatulae. Their fibrillar structure is the primary source of high adhesion. In this study, we construct the adhesion design database for biomimetic adhesive system. A simple idealized fibrillar structure consisting of single array of beams is modeled. The fibers are assumed as oriented cylindrical cantilever beams with spherical tip. We consider three necessary conditions; buckling, fracture and sticking of fiber structure, which constrain the allowed geometry. The adhesion analysis is performed for the attachment system in contact with rough surfaces with different s values for different main design variables-fiber radius, aspect ratio and material elastic modulus and so on. The developed adhesion design databases are useful for understanding biological systems and for guiding of fabrication of the biomimetic attachment system.

• 한국산림과학회지
• /
• 제96권6호
• /
• pp.667-675
• /
• 2007

I-SSR 표지자를 이용하여 영월지역의 줄댕강나무 2개 집단의 유전적 다양성과 공간구조가 조사되었다. 줄댕강나무는 분포가 제한되어있고 집단크기가 작음에도 불구하고 개체 수준에서 추정된 유전변이는 다른 관목류와 유사한 수준으로 판단되었다.(S.I.=0.336, h=0.217). Genet 수준에서 조사된 유전다양성 역시 개체 수준의 값과 큰 차이가 없었다(S.l.=0.339, h=0.219). 전체 유전변이의 약 18.7%가 집단 간 차이로 나타나, 다른 관목류에 비해 다소 높거나 비슷한 수준이었다. $N_G/N$ 값과 Simpson's index로 추정된 유전자형 다양성 역시 다른 관목류에 비해 높았다($N_G/N=0.729$. $D_G=0.988$). 한 genet의 최대직경은 5.5 m로 비교적 작게 나타났다. 높은 수준의 유전자 및 유전자형 다양성과 genet의 작은 직경 크기는, 무성번식이 줄댕강나무 집단의 유전적 구성에 차지하는 비중이 그렇게 크지 않음을 보여주었다. 개체 및 genet 수준에서 큰 차이 없이, 약 12-18 m 거리 내에 분포하는 개체 간에 자기상관성이 인정되었다. 줄댕강나무 집단의 현지외 보전을 위한 표본 추출 시, 연속 분포하는 집단에서는 최소 18m 이상의 간격을 두는 것이 좋고, 소규모 단편으로 분리되어 분포하는 경우 최대한 많은 단편으로부터 표본을 채취하는 것이 효율적일 것으로 판단되었다.

• 대한전자공학회논문지TC
• /
• 제41권6호
• /
• pp.79-86
• /
• 2004

정확한 closed-form 근린함수 계산방법은 공간영역 그린함수에 포함된 Sommerfeld 적분의 계산시간을 줄이기 위해 기존에 이용되어온 복소 영상법(Complex image method)과 2단계 근사화법(Two-level approach)에 비해 훨씬 적은 오차를 갖는다. 본 논문에서는 정확한 closed-form 그린함수 계산방법을 일반적인 전원을 포함하는 평판구조에 적용하는 방법을 제안하였다.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.63-66
• /
• 2001

In order to derive simple and accurate closed-form spatial Greep’s functions for the thick microstrip substrate, an efficient method based on the two-level approach, which circumvents the burdensome steps (i.e., without necessity of extraction of quasi-static contributions and subsequent determination of approximation parameters) in the previous complex image method, is considered in conjunction with the use of the original Prony`s method. The present method is observed to give more accurate results for the evaluation of the Green`s functions over wider frequency range independently of the source-to-field distances than the previous method.

• 대한건축학회논문집:구조계
• /
• 제35권6호
• /
• pp.101-109
• /
• 2019

The purpose of this study is to improve a general Top-Down construction process for superstructure construction period reduction. In a general Top-Down construction sequence, the ground floor slab is set up first. Subsequently, 1st basement level construction including core walls is constructed. Initiation of the ground level superstructure gets waited until then. In this study, removable deck plate installation on the bottom of the core walls of ground level is preceding the concrete casting, therefore, ground level superstructure construction is able to get started earlier. Up to first typical floor concrete casting, total of seventy-two working(calendar) days will be resulted in a reduction from the total construction periods.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권4호
• /
• pp.422-427
• /
• 1997

Breeding efficiency was investigated to reveal crucial factors for constructing effective breeding system with subdivided populations under equal genetic level. Simulation study of selection experiment was performed for 20 generations with 20 replications each, comparing average breeding values and inbreeding coefficients between the two breeding systems; single population scheme and two population scheme, each of which had the same genetic parameters. Genetic correlations (-0.5 to 0.5) were assumed to be caused only by pleiotropic effect of a gene. Phenotypes of the two traits generated by polygenic effect with additive 36 loci and residuals distributed normally were selected by two traits selection index procedure. Comparing between the single population scheme and the two population scheme, the single population scheme showed higher genetic gain with lower inbreeding coefficient. This result was confirmed particularly for the situation of high selection intensity, high heritability and high degree of unevenness for economic weight. Genetic correlations in the single population scheme were significantly lower than the two population scheme when initial genetic correlation was negative. When terminal crossbreeding for the two population scheme is taken into account, superiority of the two population scheme was suggested. The terminal crossbreeding was effective under the situation of long term selection, existence of moderate inbreeding depression and use of less extreme economic weight.