Journal of the korean academy of Pediatric Dentistry
/
v.34
no.3
/
pp.359-369
/
2007
This in vitro study was performed to assess the effect of surface sealing on the microleakage of class V composite resin restorations that underwent several aging treatments. Class V cavities were prepared on the buccal surface of 100 sound extracted premolars and restored with a hybrid light-cured composite resin according to the manufacturer's instructions. They were randomly divided into two groups consisting of 50 samples: group I, without surface sealing, and group II, in which margins were etched and surface sealant was applied. After thermocycling, each group was divided into five subgroups, respectively, to represent the five aging treatments: group A = no further treatment (only thermocycling), B = toothbrushing, C = load cycling, D = toothbrushing followed by load cycling, and E = aging treatment in deionized water for six months. Microleakage was assessed by examining the penetration of 2% methylene blue dye. The following results were obtained: 1. At occlusal and cervical margins in groups without surface sealing, there was no significant difference in microleakage after the several aging treatments (p>0.05). 2. The occlusal margins of groups with surface sealing showed no significant differences after the several aging treatments (p>0.05). 3. In the cervical margins of groups with surface sealing, microleakage significantly increased after load cycling or aging in deionized water for six months (p<0.05). 4. The no-further-treatment group and the toothbrushing group with surface sealing showed less microleakage than the corresponding groups without surface sealing (p<0.05). 5. The surface-sealed groups with load cycling or aging in deionized water showed no significant difference in microleakage to the corresponding groups without surface sealing (p>0.05). In conclusion, the results of this study suggest that the surface sealant infiltrating through the gap of the cervical margin exerted a positive effect on microleakage at the initial stage, but the effect was not sufficient to overcome the stress generated by the cuspal flexure during occlusal loading and water absorption.
Journal of Dental Rehabilitation and Applied Science
/
v.18
no.3
/
pp.145-155
/
2002
The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.
To develop new variety of oyster mushroom, 63 intra-specific hybrids between the strain Suhan and #Nongi201 were developed using hyphal anastomosis technique in 2004. The Po2008-275 hybrid between the dikaryon strain 04-154(Suhan x #Nongi201) and the monokaryon strain derived from ASI2487 were developed using hyphal anastomosis in 2008. The Po2008-275 was shown the best cultural characteristics, selected to be a new variety and named as 'Guseol'. The new commercial strain, 'Guseol' had dark grey pilei and grows well under spring and autumn conditions in Korea. The fruiting bodies of 'Guseol' were of an excellent quality in that not only the stipe was thick and long but also the pileus was small and hard. The optimum temperatures for mycelial growth and fruiting body development were $25{\sim}30^{\circ}C$ and $10{\sim}16^{\circ}C$, respectively. Time period required for the initiation of the first fruiting body was about 3 to 5 days depending on the temperatures. The shape of fruiting body was thin funnel shape. Fruiting body production per box($43{\times}43{\times}12cm$) was about $1545{\pm}400.9g$ which was almost 137% quantity compared to that of parental strain 04-154. Relatively low temperature incubation ($11^{\circ}C$) resulted in the development of better quality of 'Guseol' mushrooms. When two different media including potato dextrose medium and mushroom complete medium were compared, the mycelial growth of this mushroom were much faster in mushroom complete medium. Similar results were observed with other variety '#Chunchu2'. Analysis of the genetic characteristics of the new commercial strain 'Guseol' showed a major DNA profile as that of the parental 04-154 when primer URP 1, primer URP 2 and primer URP 5 were used, but different to '#Chunchu2' that was used as a control. This new variety of the dark grey oyster mushroom had smart and high quality image that corresponds well to "health food". We therefore expect that this new strain will satisfy the consumers demand for variety and excellent mushrooms.
Journal of the Korean Institute of Landscape Architecture
/
v.42
no.1
/
pp.1-17
/
2014
The Practice of Landscape Urbanism has been criticized on two aspects; Landscape Urbanism does not yet provide differentiated forms of planning and design neither able to fill the gap between theory and practice. In response to these criticisms, Landscape Urbanists have tried to provide additional cases that can exemplify achievements of Landscape Urbanism in practice. There has been another type of effort to suggest distinct planning and design strategies of Landscape Urbanism from theoretical texts. However, these approaches overlooked the fact that professional practice actually gave huge influence on the theoretical framework of Landscape Urbanism. Based on this observation, the study examined the development process of Landscape Urbanism by verifying the correlation between its practice and theory. Through an extensive literature review, the study suggested horizontality, infrastructure, process, ecology, media, hybrid, site, and scale as eight major concepts of Landscape Urbanism. Afterwards, the study classified 51 projects cited in major essays and articles of Landscape Urbanism into four categories: Archetypal projects, precedent projects, exemplary projects, and progressive projects. The correlation between strategies of the selected projects and main theoretical concepts was analyzed. The study found out that the early stage of the theory was focused on defining and explaining the new design and planning approaches of contemporary design projects related with landscape. However, these days, Landscape Urbanism became a more productive in providing diverse types of practice sharing the direction and vision proposed by the theory. Various projects influenced in constructing theoretical structure of Landscape Urbanism as well as proved that the suggestions of Landscape Urbanism could be effective to reorganize contemporary cites in the form of design and planning strategies. The observation of this study can contribute to provide proper answers to the criticism on practice of Landscape Urbanism and be helpful in understanding the limits and unrealized potentials of Landscape Urbanism as a practical theory.
Yoo, Young Bok;Oh, Min Ji;Oh, Youn Lee;Shin, Pyung Gyun;Jang, Kab Yeul;Kong, Won Sik
Journal of Mushroom
/
v.14
no.4
/
pp.142-154
/
2016
Worldwide production of mushrooms has been increasing by 10-20% every year. Recently, Pleurotus eryngii and P. nebrodensis have become popular mushroom species for cultivation. In particular, China exceeded 8.7 million tons in 2002, which accounted for 71.5% of total world output. A similar trend was also observed in Korea. Two kinds of mushrooms-Gumji (金芝; Ganoderma) and Seoji-are described in the ancient book 'Samguksagi' (History of the three kingdoms; B.C 57~A.D 668; written by Bu Sik Kim in 1145) during the Korea-dynasty. Many kinds of mushrooms are also described in more than 17 ancient books during the Chosun-dynasty (1392~1910) in Korea. Approximately 200 commercial strains of 38 species of mushrooms were developed and distributed to cultivators. The somatic hybrid variety of oyster mushroom, 'Wonhyeong-neutari,' was developed by protoplast fusion, and distributed to growers in 1989. Further, the production of mushrooms as food was 199,829 metric tons, valued at 850 billion Korean Won (one trillion won if mushroom factory products are included) in 2015. In Korea, the major cultivated species are P. ostreatus, P. eryngii, Flammulina velutipes, Lentinula edodes, Agaricus bisporus, and Ganoderma lucidum, which account for 90% of the total production. Since mushroom export was initiated in 1960, the export and import of mushrooms have increased in Korea. Technology was developed for liquid spawn production, and automatic cultivation systems led to the reduction of production cost, resulting in the increase in mushroom export. However, some species were imported owing to high production costs for effective cultivation methods. In academia, RDA scientists have conducted mushroom genome projects since 1997. One of the main outcomes is the whole genome sequencing of Flammulina velutipes for molecular breeding. With regard to medicinal mushrooms, we have been conducting genome research on Cordyceps and its related species for developing functional foods. There are various kinds of beneficial substances in mushrooms; mushroom products, including pharmaceuticals, tonics, healthy beverages, functional biotransformants, and processed foods have also became available on the market. In addition, compost and feed can likewise be made from mushroom substrates after harvest.
This will be second publication regard with silkworm selection using anesthetic followed by previous report. This treatise investigated for nacorsis recovery concerned with silkworm health through more directions than the previous paper. After the author has found a possibility of silkworm seperation through nacorsis recovery, he has recommended to use Balance Health (BH) value system to evaluate or identify silkworm health and to produce better homogeneous silkworm eggs. Also, the author has continued the observation for the next generation how once nacortized parents affect to their family. The obtained results are summarized as followings. 1. Basic investigation a) Hybrid silkworm variety recovers from nacorsis earlyer than pure line because it is stronger. b) Strong pure line variety recovers from nacorsis earlyer than weak one because it is stronger. c) Male worm recovers from nacorsis earlyer than female worm because it is stronger. 2. Establishment of Balance Health(BH) value system. In order to identify each seperated group by nacorsis and their family, the following Balance Health (BH) value indicating system was established.(Table Omitted) 3. In order to select better silkworm during breeding service, the BH value indicating system is strongly recommended. That is, in case BH value is smaller than four, it would be strong group or in case BH value is larger than four, it would be weak group. 4. Once nacortized parents do not harm any nature for next generation regardless P$_1$ or F$_1$ production. 5. The seperation through nacorsis may delay retrograde phenomenon some years than other case, so, this system should be used for pure line production every year. 6. It is recommended to nacortize silkworm for five minutes on breeding purpose, but two and half minutes on pure lines reproduction at fifth instar. 7. This report has been discussed in relation to practical industry promotion aspects, but there are many subjects to be solved from academical aspect in future
The morphological, anatomical and physiological traits were eximined for Populus alba ${\times}$ glandulosa which is an important planting species in Korea. The results obtained are as follows: 1. External characters in the leaf shape and chaff shape in the catkin were inherited as incomplete dominance but nectar gland was inherited as dominance. 2. Among the 15 selected clones, 9 clones were male, 2 clones female and 2 clones monoecious. 3. There were well-developed cork layers and bast fiber bundles in the bark. 4. Primordial leaves composed of 3 layers of cells and those undifferentiated into palisade and spongy parenchymas differed in its origin. 5. Leaf scare consisted of two kinds of tissues; one is connected to vascular bundle and the other not to vascular bundle. Tissues which had been connected to vascular bundle were isolated with only 2 or 3 layers of cork cells from the outside. 6. There was complicated arrangement in the vascular bundle of petioles. 7. Growth of the hybrid was sensitively influenced by external temperature, day-length and amount of light. In particular, it was apparent in height growth. 8. Flatness, loam soils and a $60{\times}60cm$ spacing might be best factors for the growth of P. alba ${\times}$ glandulosa. 9. The rooting of 15 clones was dependant upon external factors. 10. The growth of P. alba ${\times}$ glandulosa was best at around 80% of soil moisture content on the basis of plot water capacity. 11. Temperature difference between inside and outside stems below 100cm during the winter was the greatest at the south among seasons and among directions. 12. The sap movement was markedly influenced by air temperature, relative humidity in forest stand and moisture content in stem. 13. Total sugars in the cortex changed with season but did not differ in the dircetion of the stem. 14. Isoperoxidase variations in the leaf were different among 15 clones. Thus, it may be useful as a criterium for clonal identification. 15. The rate of soil moisture content decreased at a rapid slope was faster than that at a slow slope. Poor growth of P. alba ${\times}$ glandulosa at the slope was probably due to depletion of soil moisture.
Journal of the korean academy of Pediatric Dentistry
/
v.31
no.3
/
pp.527-533
/
2004
One clinical technique recommended for improving marginal integrity is "rebonding" or application of unfilled resins to the surface of composite restoration. But continuously the restorations are affected with occlusal load. There is room for doubt that the rebonding agent has the positive effect on microleakage in spite of the stress generated by the occlusal load. This study determined the effect of rebonding on microleakage of Class V resin composite restorations under load cycling. Class V cavities were prepared on the buccal surface of 40 sound extracted premolars and restored with a hybrid light-cured resin composite according to manufacturers' directions. They were randomly divided into two groups consisting of 20 samples: a control(group I), without surface sealing, and the other group(group II) in which margins were etched and rebonded. After thermocycling, each of groups was divided into subgroups(group A, B), and load cycling(total 100,000 cycles with 4-100N load at a rate of 1 Hz) were applied on the group B. Assessment of microleakage utilized methylene blue dye penetration. The following results were obtained: 1. In the occlusal region, no significant difference was noted in the scores regardless of whether or not the rebonding agent was used(group TA-IIA, IB-IIB)(p>0.05). 2. In the cervical region, the control group with rebonding(group IIA) showed the better result than the group without rebonding(group IA)(p<0.05). 3. In the cervical region, the rebonded group with load cycling(group IIB) showed similar results to the group without rebonding(group IB) and no significant difference was noted(p>0.05).
A sweet corn hybrid, Golden Cross Bantam 70, was grown at 0, 5, 10, 15 and 20kg/10a of nitrogen (N) under the transparent P. E. film mulch to find the best yield evaluation method. Culm length, ear height, number of tillers increased and silking date was earlier by 1-2 days with increased N level. Leaf area index of main culm at harvest increased with increased N level. Marketable ears were divided into two classes according to the whole sale market price; the frist grade of which husked ear weight over 150g (unhusked ear weight 230g) and the second grade of which husked ear weight between 100 and 150g (unhusked ear weight between 180 and 230g). Average length, thickness, and weight of both grades of marketable ears were not different among the N levels. The proportion of the first grade increased with increased N level. However, total number and weight of marketable ears and gross income per 10a calculated considering weight and number of ears increased with increased N level. There were highly positive correlations between gross income and ear number or ear weight per l0a. The number and weight of marketable ears were underestimated at high N levels compared with gross income. Dry matter yield of stover ranged 740-963kg/10a and increased with increased N level with 20. 8-24.5% dry matter content. Rice black-streaked dwarf virus infection rate was 11.8-15.0%, but it was not related to N level. N concentration in ear was similar but that in stover increased with increased N level. Total N uptake increased but N recovery decreased with increased N level.
Park, Byung-Moon;Bae, Yong-Ki;Kang, Min-Young;Bang, Dong-Wan;Kim, Yon-Lae;Lee, Jeong-Woo
Journal of radiological science and technology
/
v.33
no.3
/
pp.277-282
/
2010
The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.