• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.34-37
• /
• 2004

Amorphous chalcogenide thin films, especially a-(Se, S) based films, exhibit a number of photo-induced phenomena. In this study, we make the As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag thin film and then we measure the holographic diffraction efficiency according to thickness of Ag. And we form the two-dimensional holographic grating. At first, we formed one-dimensional grating and then we form two-dimensional grating by rotate the sample. We found out the most suitable thickness of Ag and in case of As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag(600${\AA}$), the diffraction efficiency was more higher than other samples. The holographic grating was formed by He-Ne laser(λ=632.8nm). The intensity of incident beam was 2.5mW and incident angle was 20$^{\circ}$. We confirm. the two-dimensional holographic grating by the pattern of diffracted beam and AFM(Atomic Force Microscope) image. We perform the etching process using by 0.26N NaOH in order to confirm clearly two-dimensional grating.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.520-527
• /
• 2000

In the present study, the analytical approaches of vacuum consolidation with horizontal drains were proposed, For dissipating rapidly pore-water in hydraulic fills, vacuum consolidation method applied vacuum pressure in horizontal drains is developed. In the analytical approaches, the governing equation is based on two-dimensional finite strain consolidation theory and the boundary conditions of horizontal drains are considered in applying negative pore-water pressure occurred by vacuum pressure, Also, parametric studies to vacuum pressure and installation pattern of horizontal drains are carried out.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.578-589
• /
• 1991

In this paper, there is proposed a novel concept of Incremintal Circle Transform which can describe the boundary contour of a two-dimensional object without object without occlusions. And a pattern recognition algorithm to determine the posture of an object is developed with the aid of line integral and similarity transform. Also, It is confirmed via experiments that the algorithm can find the posture of an object in a very fast manner independent of the starting point for boundary coding and the position of the object.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1059-1062
• /
• 1989

This paper describes a new method for two-dimensional(2D) positioning system by use of crosscorrelation of vague M-arrays. An M-array pattern is attached on an object to be positioned and it is observed by a TV camera in out-of-focus condition. The crosscorrelation between the observed image data and the reference M-array gives us the information about the 2D position of the object.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.485-489
• /
• 1995

From the relationship between the two different views of an object with grid, the three dimensional coordinates of intersection points are determined. The images are captured and digitized with a CCD camera and a frame grabber. To find intersection points, local thresholding and line thinning operations are performed. By establishing the correspondence between the points in the two views, the three dimensional corrdinates of intersection points are calculated.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2289-2295
• /
• 2005

Two-Phase flow pattern and pressure drop data were obtained for pure refrigerants R134a and R123 and their mixtures as test fluids in a horizontal tube. The flow pattern is observed through tubular sight glasses located at inlet and outlet of the test section. The flow map of Baker developed for air-water two-phase flow at atmospheric pressure failed to predict the observed flow patterns at the higher value of the mass velocity used in the present study. The map of Kattan et al. predicted the data well over the entire region of mass velocity selected in the present study. The measured pressure drop increased with an increase in vapor quality and mass velocity. A new two-phase multiplier was developed from a dimensional analysis of the frictional pressure drop data measured in the present experiment. This new multiplier was found successfully to correlate the frictional pressure drop.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.5
• /
• pp.807-820
• /
• 1997

This exploratory research was intended to develop and test a slacks pattern based upon conic model. Data came from measurements of photograph of three subjects. Silhouette of slacks was close fit on waist and hip and loose under hip level. This three-dimensional form was modeled with truncated cones. This conic model was truncated by plane of the waist level, the abdomen level, the hip level, the crotch level and the ankle level parallel to the floor. Two models that have differences in back part of the model were tested. Drafted patterns from two models were taken for each subject. Drafted experimental pattern was operated for slacks pattern. The first step was to make sideseam. Parts over crotch level were moved to both sides. And then to make waistdarts. Experimental pattern had two darts each in front and back. Each experimental slacks was evaluated by sensory test to appearance and comfort by five judges. The results can be summarized as follows. 1) Appearance and comfort of experimental pattern were judged to be satisfactory. Especially these patterns were fitted we18 in waist darts front and back. So we evaluated that was proper pattern for slacks. 2) Model 2 was better in appearance than model 1. But Model 1 was more comfortable in non significant difference. This was supposed to be resulted from fit more closely of model 2. 3) considering preceding results, this geometric model based upon truncated cone was applicable for slacks pattern.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2016

During flight of the aircraft, the vortex merging phenomenon appears under the certain condition between co-rotating vortices which were generated at the wing tip and lifting-surface. And then these merged vortices at both sides show counter-rotating pattern to affect on the downstream of the aircraft. In this paper, the numerical simulations are conducted assuming this phenomenon in two-dimensional co-rotating or counter-rotating vortices pairs. Two-dimensional incompressible Navier-Stokes equations were converted into Vorticity-Streamfunction form and the Galerkin spectral method was adopted. The third order Runge-Kutta method was used for time integration. The effects on the vortex merger and degree of vortex merger were investigated according to time, Reynolds number, and changes in the distance between two vortices.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• Korean Institute of Interior Design Journal
• /
• v.17 no.4
• /
• pp.84-91
• /
• 2008

The objective of this study is to investigate how visitors' behavior change in relation to the pattern of exhibition in art museum. For the purpose Busan Museum of Modern Art was selected as the sample in this study. And two patterns of exhibition, namely the planar exhibition and the three dimensional exhibition, were surveyed using the tracking movement method. The data gathered from random-sampling 60 visitors in a art museum was analyzed by the correlation analysis and T-test. The results are as follows; 1) There is no meaningful difference in visitors' behavior by the exhibition pattern in terms of their viewing area, viewing time, viewing distance, viewing velocity, viewing rate. 2) In contrast, there is meaningful difference in terms of the number of stops by visitors and the time spent without movement to see the objects; visitors stopped more often and stayed longer within the three dimensional exhibition space than the planar exhibition in a art museum. In sum, visitors extrinsically show no big behavioral difference between the planar exhibition and the three dimensional exhibition, but much difference in the way they communicate with objects; they show more active behavior within the three dimensional exhibition space.