• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.1-10
• /
• 2022

Seismic ground response evaluation is one of the main issues in geotechnical earthquake engineering. These analyses are subsequently divided into one-, two- and three-dimensional methods, and each of which can perform in time or frequency domain. In this study, a novel approach is proposed to assess the seismic site response using two-dimensional transfer functions in frequency domain analysis. Using the proposed formulation, a program is written in MATLAB environment and then promoted utilizing the equivalent linear approach. The accuracy of the written program is evaluated by comparing the obtained results with those of actual recorded data in the Gilroy region during Loma Prieta (1989) and Coyote Lake (1979) earthquakes. In order to precise comparison, acceleration time histories, Fourier amplitude spectra and acceleration response spectra diagrams of calculated and recorded data are presented. The proposed 2D transfer function diagrams are also obtained using mentioned earthquakes which show the amount of amplification or attenuation of the input motion at different frequencies while passing through the soil layer. The results of the proposed method confirm its accuracy and efficiency to evaluate ground motion during earthquakes using two-dimensional model. Then, studies on irregular topographies are carried out, and diagrams of amplification factors are shown.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.112-120
• /
• 2021

The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.31-40
• /
• 2017

1990년대 중반에 개발된 절대절점좌표는 탄성체 동역학 해석에 활용되고 있다. 운동방정식을 유도하는 과정에서 변위장을 이루는 다항식의 차수가 증가하면 필연적으로 자유도가 증가하게 되고, 이는 해석 시간의 증가로 이어진다. 따라서 본 연구에서는 차원 운동방정식을 무차원 운동방정식으로 전환함으로써 해석 시간을 단축시키고자 하였다. 위치 벡터를 이루는 형상 함수는 무차원으로, 절점 좌표는 길이 차원으로 정리한 후 무차원화하는 변수를 통해 무차원 질량행렬, 무차원 선형 강성행렬 및 무차원 보존력을 유도하였다. 무차원 운동방정식의 검증과 효율성은 정적 처짐에 대한 정해가 존재하는 외팔보 및 단진자 예제를 통해 제시하였다.

• 한국음향학회지
• /
• 제30권5호
• /
• pp.239-248
• /
• 2011

초음파 의료용 변형률 영상에서 화질을 향상시키기 위해서는 정확한 변위를 계산하여야 한다. 본 논문에서는 2차원 방향의 움직임에 의한 변위를 구할 때 1차원 변위 계산법을 적용하기 위하여 초음파 신호의 축방향 변위와 측방향 변위를 분리하여 계산하였다. 측방향 변위를 계산하기 위하여, 측방향으로 정렬된 1차원 신호를 해석 신호 (analytic signal)로 변환한 뒤 상호상관방법을 이용하였다. 제안한 측방향 변위계산 알고리즘을 이용하여 구한 측방향 변위로 측방향 움직임을 보상한 뒤에, 다시 축방향 변위를 구하여 변형률 영상을 얻었다. 제안한 방법으로 얻은 변형률 영상은, 기존의 축방향 변위만 계산하여 얻은 변형률 영상에 비해 신호 대 잡음비와 명암대비 대 잡음비에서 향상됨을 팬텀과 인체 데이터를 이용한 실험을 통해 확인하였다.

• 정보처리학회논문지A
• /
• 제11A권2호
• /
• pp.189-194
• /
• 2004

본 논문은 다량의 고차원 얼굴 표정 모션 데이터를 2차원 공간에 분포시키고, 애니메이터가 이 공간을 항해하면서 원하는 표정들을 실시간 적으로 선택함으로써 얼굴 표정 애니메이션을 생성하는 방법을 기술한다. 본 논문에서는 약 2400여개의 얼굴 표정 프레임을 이용하여 표정공간을 구성하였다. 표정공간의 생성은 임의의 두 표정간의 최단거리의 결정으로 귀결된다. 표정공간은 다양체 공간으로서 이 공간내의 두 점간의 거리는 다음과 같이 근사적으로 표현한다. 임의의 마커간의 거리를 표시하는 거리행렬을 사용하여 각 표정의 상태를 표현하는 표정상태벡터를 정의한 후, 두 표정이 인접해 있으면, 이를 두 표정 간 최단거리(다양체 거리)에 대한 근사치로 간주한다. 그리하여 인접 표정들 간의 인접거리가 결정되면, 이틀 인접거리들을 연결하여 임의의 두 표정 상태간의 최단거리를 구하는데, 이를 위해 Floyd 알고리즘을 이용한다. 다차원 공간인 표정공간을 가시화하기 위해서는 Sammon 매핑을 이용하여 2차원 평면에 투영시켰다. 얼굴 애니메이션은 사용자 인터페이스를 사용하여 애니메이터들이 2차원 공간을 항해하면서 실시간으로 생성한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.979-982
• /
• 2003

In this study, because of change in electromagnetic force, deformation of the free surface motion of a magnetic fluid is changed. Deformation of the free surface motion of a magnetic fluid for the change in electromagnetic force is discussed and carried out theoretically and experimentally on the basis of Rosensweig Ferrohydrodynamic Bernoulli Equation. Objective of this study explicates free surface motion by electromagnetic force and planes to designed controller. To control free surface of magnetic fluid, it embody designed two-dimensional free surface form of magnetic fluid. By using this characteristics, they applied to oscillator for surface control, flow control, boundary layer control. Strength of magnetic field and height of free surface of magnetic fluid measure as a hall-effect sensor. As performing height control of magnetic fluid, the result will be presented possibility of free surface deformation control.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1155-1160
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring ship on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using the this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, sway, heave, surge under the external forces.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.990-1000
• /
• 2012

In this paper, we propose an algorithm that creates three-dimensional (3D) stereoscopic video from two-dimensional (2D) video encoded by H.264 instead of using two cameras conventionally. Very accurate motion vectors are available in H.264 bit streams because of the availability of a variety of block sizes. 2D/3D conversion algorithm proposed in this paper can create left and right images by using extracted motion information. Image type of a given image is first determined from the extracted motion information and each image type gives a different conversion algorithm. The cut detection has also been performed in order to prevent overlapping of two totally different scenes for left and right images. We show an improved performance of the proposed algorithm through experimental results.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.190-197
• /
• 2005

For precise micro-grooving and surface machining, a mechanism for creating elliptical vibration cutting (EVC) motion is proposed which uses two parallel piezoelectric actuators. And based on its kinematical analysis, variations of EVC path are investigated as a function of dimensional changes in the mechanism, phase difference and amplitude of excitation sinusoidal voltages. Using the proposed PZT mechanism, various types of two dimensional EVC paths including one dimensional vibration cutting path along the cutting direction and thrust direction can be easily obtained by changing the phase lag, the amplitude of the piezoelectric actuators, and the dimension of the mechanism.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1933-1936
• /
• 2005

The isometric area of the anterior cruciate ligament was calculated during knee flexion-extension. Flexion-extension motion data of the joint were obtained using Fastrak and a three-dimensional motion measurement system. A total of five subjects were seated on a flat table and the tibia sensor position was measured with the femur fixed on the table. A three-dimensional knee model was constructed using a graphic tool to simulate the knee motion. Twenty seven positions of the tibia region and forty two positions of the femur region were selected and the distances between the determined tibial and femoral points were calculated. Highly isometric areas were found and displayed as three dimensional aspects.