• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.751-758
• /
• 2003

We consider a life testing experiment in which several two-component shared parallel systems are put on test, and the test is terminated at a predesigned experiment time. The bivariate data obtained from such a system-level life testing can be classified into three cases: 1) the case of failed two components with known failures times, 2) the case of censored two components, and 3) the case of one censored component and the other failed component of which the failure time might be known or unknown. In this thesis, the likelihood estimators for Freund's bivariate exponential life distribution under above censoring scheme are obtained. Results of comparative studies based on Monte Carlo simulation are presented.

• Journal of Microbiology
• /
• 제43권1호
• /
• pp.49-53
• /
• 2005

Putative genes for a two-component signal transduction system (akbS and akbT) were detected near the alkylbenzene-degrading operon of Rhodococcus sp. DK17. Sequence analysis indicates that AkbS possesses potential ATP-binding and histidine autophosphorylation sites in the N- and C-terminal regions, respectively, and that AkbT has a typical response regulator domain. Mutant analysis combined with RT-PCR experiments further shows that AkbS is required to induce the expression of o-xylene dioxygenase in DK17.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.23-31
• /
• 2006

Mean velocities and turbulent characteristics in the three-dimensional flow fields of a gun-type gas burner were measured by using triple hot-wire probe (T-probe) in order to compare them with the results already presented by X-type hot-wire probe (X-probe). Vectors obtained by the measurement of two kinds of probes in the horizontal plane and in the cross section respectively show more or less difference in magnitude each other, but comparatively similar shape in overall distribution. Axial mean velocity component along the centerline shows that the value by T-probe is about ten times smaller than that by X-probe above the range of X/R=3. Also, the axial component of turbulent intensity along the centerline appears the biggest difference between the two probes. Moreover, axial mean velocity component, axial turbulent intensity component and rotational along the Y-directional distance show a big difference between slits and swirl vanes. On the whole, the values by T-probe appear smaller than those by X-probe.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.365-369
• /
• 2006

It is concentrated on a methodology to establish a scheme of investment on power distribution systems of components. This paper provides a methodology to estimate the scheme as using a customer interruption cost regarding reliability indices in power distribution systems. The proposed method basically uses the failure rate depending on time for explaining the deterioration of a component. Therefore, the theory of the sensitivity is used for deciding the precedence of the investment to consider an effect of each component's failure rate on the system reliability. After Estimating the sensitivity on component investment cost making incremental reliability level is produced by component's investment cost accumulated according to the precedence of the sensitivity. After that, the failure rate corresponding with reliability level on the curve of investment cost is used as producing the curve of customer interruption cost. Two curves have the crossing point that is proposed to acceptable reliability level for customer and utility. In this paper, the acceptable reliability level for customer with the utility is assessed to analyze customer interruption cost and sensitivity of reliability indices. In conclusion the result of investment based on this method is shown to the reliability level with two cost.

• 인터넷정보학회논문지
• /
• 제4권3호
• /
• pp.57-67
• /
• 2003

소프트웨어 생산 라인은. 소프트웨어 자산에 존재하는 일반적인 컴포넌트를 구체화하고 미리 정의된 아키텍처를 기반으로 조립함으로써, 고품질의 응용 프로그램을 빠르게 개발할 수 있도록 해 주는 것을 목적으로 한다. 본 논문에서는, 소프트웨어 생산 라인 구축을 지원하기 위하여 GenVoco 아키텍처와 XML/XSLT 기술을 이용한 컴포넌트 코드 자동 생성 기법과, 이를 기반으로 한 컴포넌트 코드 생성 시스템인 CompGenX(Component Generator using XML)를 제안한다. CompGenX은 컴포넌트 코드 생성 시에 컴포넌트의 재구성성을 지원함으로써 재사용자가 컴포넌트 재사용 시 자신의 목적에 맞는 컴포넌트의 소스 코드를 자동으로 생성할 수 있게 해 준다. 이를 위한 컴포넌트 개발 과정은 크게 컴포넌트 패밀리 구축 과정과 컴포넌트 재사용 과정으로 나누어진다. CompGenX는 컴포넌트 패밀리 구축 과정을 위하여, 도메인 분석을 위한 특성 모델 작성 도구, 도메인 설계를 위한 도메인 아키텍처 정의 도구를 제공한다. 또한 코드 자동 생성에 필요한 구성 지식 명세서와 코드 템플릿 작성 도구를 제공한다. 컴포넌트 재사용 과정을 위해서 CompGenX는, 컴포넌트 패밀리 검색 도구, 컴포넌트 커스터마이징 도구 및 컴포넌트 코드 생성기 등을 제공한다. 본 논문의 컴포넌트 코드 자동 생성 기법과 생성 시스템은 컴포넌트 기반 소프트웨어 생산 라인 구축을 위한 기반 기술로서 적용될 수 있다.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.538-544
• /
• 2022

In existing ceramic mold manufacturing processes, inorganic binder systems (Si-Na, two-component system) are applied to ensure the effective firing strength of the ceramic mold and core. These inorganic binder systems makes it possible to manufacture a ceramic mold and core with high dimensional stability and effective strength. However, as in general sand casting processes, when molten metal is injected at room temperature, there is a limit to the production of thin or complex castings due to reduced fluidity caused by the rapid cooling of the molten metal. In addition, because sodium silicate generated through the vitrification reaction of the inorganic binder is converted into a liquid phase at a temperature of 1,000 ℃. or higher, it is somewhat difficult to manufacture parts through high-temperature casting. Therefore, in this study, a high-strength ceramic mold and core test piece with effective strength at high temperature was produced by applying a Si-Na-Ti three-component inorganic binder. The starting particles were coated with binary and ternary inorganic binders and mixed with an organic binder to prepare a molded body, and then heat-treated at 1,000/1,350/1,500 ℃ to prepare a fired body. In the sample where the two-component inorganic binder was applied, the glass was liquefied at a temperature of 1,000 ℃ or higher, and the strength decreased. However, the firing strength of the ceramic mold sample containing the three-component inorganic binder was improved, and it was confirmed that it was possible to manufacture a ceramic mold and core via high temperature casting.

• 한국미생물·생명공학회지
• /
• 제48권1호
• /
• pp.24-31
• /
• 2020

Five genes (mxbDM, mxcQE and mxaB) are responsible for the transcription of methanol oxidation genes in Methylobacterium strains. Among these, MxbDM and MxcQE constitute the two-component system (TCS) regulating methanol metabolism. In this study, we integrated the methanol-sensing domain of MxbD and MxcQ with the EnvZ/OmpR from Escherichia coli. The domain-swapping strategy resulted in chimeric histidine kinases (HK's) MxbDZ and MxcQZ AM1 containing recombinant E. coli. Real-time quantitative PCR was used to monitor OmpC expression mediated by the chimeric HK and response regulator (RR) OmpR. Further, an ompC promoter based fluorescent biosensor for sensing methanol was developed. GFP fluorescence was studied both qualitatively and quantitatively in response to environmental methanol. GFP measurement also confirmed ompC expression. Maximum fluorescence was observed at 0.05% methanol and 0.01% methanol using MxbDZ and MxcQZ AM1, respectively. Thus the chimeric HK containing E. coli were found to be highly sensitive to methanol, resulting in a rapid response making them an ideal sensor.

• 한국분무공학회지
• /
• 제11권1호
• /
• pp.39-47
• /
• 2006

In-cylinder flows in a motored 3.5L four-valve SI engine were investigated quantitatively using three-component LDV system, to determine how engine configuration affects the flow field. The purpose of this work was to develop quantitative methods which correlate in-cylinder flows to engine performance. For this study, two distinct intake/piston arrangements were used to examine the flow characteristics. Quantification of the flow field was done by calculating two major parameters which are believed to characterize adequately in-cylinder motion. These quantities were turbulent kinetic energy(TKE) and tumble ratio in each plane at each crank angle. The results showed that in-cylinder flow pattern is dominated by the intake effects and two counter rotating vortices, developed during the intake stroke, produced relatively low tumble ratio. Therefore, the applicability of these quantities should be carefully considered when evaluating characteristics resulting from the complex in-cylinder flow motions.

• Journal of the Korean Data and Information Science Society
• /
• 제6권2호
• /
• pp.77-83
• /
• 1995

The inferences on a series system under the usual condition using data from constant stress partially accelerated life tests and type I censoring is studied. Two optimal designs to determine the sample proportion allocated each stress level model are also presented, which minimize the sum of the generalized asymptotic variances of maximum likelihood estimators of the failure rate and the acceleration factors and the sum of the asymptotic variances of maximum likelihood estimators of the acceleration factors for each component. Each component of a system is assumed to follow an exponenial distribution.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권2호
• /
• pp.45-52
• /
• 2002

Load modeling is classified into two methods according to approaching method, so called the measurement and component-based method. The measurement method is to model the load characteristics measured directly at substations and feeders. But it is difficult to measure continuously load characteristics from naturally occurring. system variation. The component-based method consists of the fellowing process; component load modeling, composition rate estimation and aggregation of component loads, etc. In this paper, the characteristic experiment of component loads was performed to obtain data for the component load modeling as the component-based method. At first, representative component loads were selected by the proposed method considering the accuracy of load modeling and the performance possibility of component load experiment in the laboratory. Also an algorithm was Proposed to identify the reliability of data obtained from the component load characteristic experiments. In addition, the results were presented as the case studies.