• 한국지반공학회논문집
• /
• 제25권5호
• /
• pp.65-73
• /
• 2009

불연속성 암반에 건설된 2-아치 터널 지표면에 외력이 작용할 경우 지중응력의 분포 특성을 파악하기 위하여 대형 모형실험과 수치해석을 수행하였다 분석결과, 불연속면이 존재하는 경우에는 선형 탄성론에 근거한 응력보다 큰 지중응력이 분포하며, 불연속면의 경사도에 따라 압력구의 형상이 달라지는 것을 확인하였다. 불연속면이 수평이거나 연직인 경우에는 지중응력의 분포가 대칭적 이지만, 경사져 있으면 경사에 대해 수직과 평행한 양방향으로 나뉘어 분포되었다. 또한 불연속면의 경사가 고각일수록 불연속면에 평행인 방향의 지중응력이 더 크게 증가하였다. 연구결과, 불연속성 암반에서는 불연속면의 경사가 음력분포에 지대한 영향을 미치며, 필러에 전달되는 응력을 추정할 경우에는 재하위치와 불연속면의 경사 및 터널 구조물간 상호위치를 고려하는 것이 중요함을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제9권7호
• /
• pp.25-35
• /
• 2008

국내의 경우 일반적인 2차로 도로터널은 시공경험 및 축적된 제반자료가 풍부하여 표준적인 지보패턴이 제시되고 있으나, 2-Arch 도로터널의 경우 아직 시공경험 및 계측자료가 부족하여 특정지형 및 암질에 대해 별도의 발파설계와 해석을 통해 선정한 지보패턴을 표준적으로 적용하고 있다. 따라서 본 연구에서는 2-Arch 도로터널의 설계 및 시공시 적용되고 있는 표준지보패턴에 대하여 하중분담률 및 편토압에 따른 거동을 분석하고 발파진동이 중앙벽체에 미치는 영향을 분석하여 적용된 지보재의 적정성 여부를 검토하였다. 그 결과 표준지보패턴에 적용되는 지보량은 적정한 것으로 나타났으나, 이는 특정지형 및 암질 조건을 고려하여 해석 후 선정된 것으로, 향후 2-Arch 도로터널의 설계 및 시공시 최종적인 표준지보패턴 선정은 대상 터널의 지형조건, 토질조건, 시공조건 등을 종합적으로 고려하여 결정되어야 할 것으로 사료된다.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.5-14
• /
• 2007

본 연구에서는 2-Arch 터널의 중앙벽체 작용하중 산정에 쓰여지는 Matsuda의 제안식을 검토하여 문제점을 분석하였으며, 현장지반조건을 반영하는 설계정수 산정을 위해 수치해석을 수행하여 Matsuda의 제안식에 계수 ${\alpha}$를 제안하여 2-Arch 터널 중앙벽체 작용하중을 재산정하였다. 지반+중앙벽체의 수치해석 결과, 중앙벽체 시공 후 선행터널 굴착에 의해 중앙벽체는 편측으로 응력이 집중되는 현상을 보였으며 터널 굴착 완료 후 중앙벽체 응력과 비교해 암반이 불량한 경우 최대 86.5%의 응력이 불균등하게 국부적으로 발현되었다. 주변지반의 특성에 따른 중앙벽체 작용하중을 수치해석으로 검토한 결과 제안식에 비해 $14{\sim}83%$의 하중이 감소되었으며, 이를 바탕으로 하중감소계수(${\alpha}$)를 산정하였다. 향후 2-Arch 터널 설계 시 하중감소계수(${\alpha}$)를 전용하면 2-Arch 터널 중앙벽체 구조물의 과다 설계를 피하고 안정성 및 경제성을 확보할 수 있을 건으로 판단된다.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.97-107
• /
• 2019

Based on the results of Han et al. (2016), in the failure zone ahead of the tunnel face it can be obviously identified that a shear failure band occurs in the lower part and a pressure arch happens at the upper part, which was often neglected in analyzing the face stability of shield tunnel. In order to better describe the collapse failure feature of the tunnel face, a new improved failure mechanism is proposed to evaluate the face stability of shield tunnel excavated in layered soils in the framework of limit analysis by using spatial discretization technique and linear interpolation method in this study. The developed failure mechanism is composed of two parts: i) the rotational failure mechanism denoting the shear failure band and ii) a uniformly distributed force denoting the pressure arch effect. Followed by the comparison between the results of critical face pressures provided by the developed model and those by the existing works, which indicates that the new developed failure mechanism provides comparatively reasonable results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.938-945
• /
• 2004

In order to cope with ever growing traffic flow and complexity in the urban area, construction demands for expanding and realigning of existing urban roads and massive development of underground space within the urban area are in its increasing trend, it is fact that, mainly due to lack of statistical data accumulation through real construction, technology and construction practice to support such demands can hardly be said to have been established enough and leave many things still to be developed. These circumstances therefore came to motivate me to get into a study for a particular subject of "Design Basics for Closely Neighbored Twin Tunnel" among others, and also to put forward subjects required to be further studied in this connection in the future as follows: 1) To make a new economical design model for closely neighbored twin tunnel not only to make a drain for center perfect but also a tunnel construction safe. 2) Further efforts should be exerted for establishment of general standards for design and construction of various types of large cross-section tunnels including Twin structure.

• 한국태양에너지학회 논문집
• /
• 제25권2호
• /
• pp.35-43
• /
• 2005

This study aims to evaluate the natural lighting performance in the sound barrier tunnel. Therefore, to evaluate the daylighting performance, the combinations of 3 tunnel roof types which are flat-roof-type(type A), slope-roof-type(type B), arch-roof-type(type C) and 3 window types which are side-window-type(type 1), one-window-roof type(type 2), two-window-roof type(type 3) are evaluated by experimenting small scaled models. In this 9 cases of experiment, illuminance levels of each case are analyzed and evaluated. The conclusion of this study is that slope-roof-type(B) and arch-roof-type(C) is preferable to flat-roof-type(A) and one-window-roof-type(B) and two-window-roof-type(C) is preferable to side-window-type(A) for daylighting in the sound barrier tunnel.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.77-94
• /
• 2016

A forked tunnel, as a special complicated underground structure, is composed of big-arch tunnel, multi-arch tunnel, neighborhood tunnels and separate tunnels according to the different distances between two separate tunnels. Due to the complicated process of design and construction, surrounding jointed rock mass stability of the big-arch tunnel which belongs to the forked tunnel during excavation is a hot issue that needs special attentions. In this paper, an elasto-plastic damage constitutive model for jointed rock mass is proposed based on the coupling method considering elasto-plastic and damage theories, and the irreversible thermodynamics theory. Based on this elasto-plastic damage constitutive model, a three dimensional elasto-plastic damage finite element code (D-FEM) is implemented using Visual Fortran language, which can numerically simulate the whole excavation process of underground project and perform the structural stability of the surrounding rock mass. Comparing with a popular commercial computer code, three dimensional fast Lagrangian analysis of continua (FLAC3D), this D-FEM has advantages in terms of rapid computing process, element grouping function and providing more material models. After that, FLAC3D and D-FEM are simultaneously used to perform the structural stability analysis of the surrounding rock mass in the forked tunnel considering three different computing schemes. The final numerical results behave almost consistent using both FLAC3D and D-FEM. But from the point of numerically obtained damage softening areas, the numerical results obtained by D-FEM more closely approach the practical behaviors of in-situ surrounding rock mass.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.207-213
• /
• 2020

Umbrella Arch Method (UAM) often employed in the tunnel construction under poor rock mass conditions in Korea. Insertion of steel pipes at the periphery of the tunnel and infiltration of grouts along the pipes into the rock masses increases tunnel stability. There are two major effects of grouts expected at the tunnel face: 1) increase of face stability by enhancing the frictional resistance of discontinuities and 2) decrease of permeability along the rock masses. Increase of resistance and decrease of permeability requires a certain curing time for the grout. In Korea, we require 24 hours for curing of grout, which means no progress of excavation for 24 hours after infiltration of grouts. This step delays the tunnel construction sequences. To eliminate such inefficiency, we propose MTG (Method for Tunnel construction using Grouting technology), which uses extended length of steel pipes (14 m) compared to conventional pipe roof method (12 m). The merit of MTG is the reduction of curing time. Because of the approximately 2 m extension of the length of steel pipe, blasting can be done after infiltration of grouting. For this paper, we conducted experiments on the shear strength behaviors of grout infilled rock joint with elapsing of curing time and blasting induced vibration. The results show that blasting induced vibration under MTG does not influence the mechanical features of grout material, which indicates no influence on the mechanical behaviors of grout, contributing to the stability of tunnels during excavation. This result indicates that MTG is a cost effective and fast construction method for tunneling in Korea.

• 터널과지하공간
• /
• 제20권6호
• /
• pp.408-420
• /
• 2010

터널시공 중 터널 완공 후에 발생할 최종변위를 미리 예측하는 것은 터널의 역학적 안정성을 평가하는데 중요하다. 시공 중인 터널에서 계측한 천단 및 내공변위와 변위함수를 이용하여 터널을 시공 완료하였을 때 발생할 터널의 최종변위를 예측하였다. 연구대상 터널은 상반과 하반으로 나누어 시공하였고 터널상반 시공 중 설치한 계측핀을 이용하여 하반막장이 이 계측핀을 통과할 때 발생한 초기변위를 계측할 수 있었다. 터널하반 시공 중 계측한 변위를 이용하여 하반굴착에 따른 변위 증가량을 변위함수로 예측한 결과 터널시공 완료 후 계측한 증가량과 거의 같았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.829-834
• /
• 2009

Alluvial soil is one of the most difficult grounds for tunneling works due to the insufficient ground strength and excessive ground water inflow. Dduk island in Seoul has a wide alluvium developed by two rivers, Han and Jung-Ryang. Subway tunnel of $\bigcirc\bigcirc$ line planed across Dduk island has highly poor ground conditions due to small cover and deeply developed alluvium. Moreover, much part of this tunnel is located parallel to the bridge foundations of another railway with a small horizontal distance. Original design was done in 2002 and construction has been in progress. During the construction, tunnel design has been partly changed and adjusted for the complex ground condition and the demand from related organizations. This paper intend to introduce the urban tunnel design and construction in alluvial soils. This line could be divided three sections(A, B, C) according to ground and adjacent conditions. Section A is featured by mixed tunnel faces consisted with alluvial soils and weathered or weak rocks. The feature of section B is that tunnel underpasses near the bridge foundations of another subway. Lastly, section C with a very short length is the most difficult construction conditions due to the small cover, poor ground, obstacles on and underneath ground surface.