Proceedings of the Korean Nuclear Society Conference
/
1995.05b
/
pp.603-608
/
1995
핵연료 성능과 uranium loading 향상을 위하여 제조한 $U_3$Si ribbon은 초정 $U_3$S $i_2$와 uranium solid solution으로 이루어져 있으며, 잘 발달된 dendrite 조직을 이루고 있다. 또한 grain size는 종전 ingot 제조방법에 비하여 약 1/20 정도로 미세하다. $700^{\circ}C$와 80$0^{\circ}C$에서 열처리한 $U_3$Si grain 내 twinning 현상은 이 온도구간에서 ordering 변태가 일어나는 것을 나타내며, TEM electron diffraction pattern 분석결과 twin은 {011}$_{fct}$ twin Plane을 따라 일어나는 것을 확인하였다.다.
Friction stir welding (FSW) was successfully performed about 900MPa grade Twinning Induced Plastisity (TWIP) steel. A PCBN tool with convex-type shoulder was applied. Optimal process conditions were deduced. Microstructure and mechanical properties such as hardness, tensile strength and impact absorbed energy were observed and evaluated, respectively. An optical microscope (OM) and a field emission scanning electron microscope (FE-SEM) was selected for observing the grain structure.
The Vickers microhardness was measured on the basal (0001) plane of sapphire single crystals in the temperature range from 25$^{\circ}C$to 1000$^{\circ}C$. The substructure surrounding the indents was investigated using selective chemical polishing and etching, optical microscopy, and trasmission electron microscopy (TEM). At room temperature, cracks were predominant, and at intermediate temperatures (400$^{\circ}C$and 600$^{\circ}C$), extensive rhombohedral twinning was observed. On the other hand, at higher temperatures, prism plane slip bands on prism plane {1120}(원문참조) were dominant in the microstructure. TEM observations revealed that the dislocation substructure at the vicinity of the indents consisted of fairly straight dislocations lying in basal and/or prism planes and aligned along the <1100> and <1120> directions. The details of the glide dissociation of perfect <110> screw dislocations into three collinear 1/3<1100> partials on the prism plane and the Peierls potential for sapphire single crystals were discussed.
The automotive and electronic industries have seriously considered the use of magnesium alloys because of their excellent properties such as strength to weight ratio, EMI shielding capability, etc. However, it is difficult to form magnesium alloys at room temperature because of the mechanical deformation related to twinning. Hence, magnesium alloys are normally formed at elevated temperatures. In this study, a temperature dependent constitutive model, the C-H/V model, for the magnesium alloy AZ31B sheet is proposed. A hardening law based on nonlinear kinematic and H/V(Hollomon/Voce) hardening model is used to properly characterize the Bauschinger effect and the stabilization of the flow stress. Material parameters were determined from a series of uni-axial cyclic experiments(C-T-C) with the temperature ranging between 150 and $250^{\circ}C$. The developed models are fit to experimental data and a comparison is made.
In assisted reproductive techniques, monozygotic twinning is not influenced by the trial of reducing the number of embryos transferred. We present extremely rare case of monochorionic triamniotic triplet pregnancy following in vitro fertilization and two-embryo transfer. During the first trimester, the crucial ultrasound findings of monochorionic triamniotic triplet pregnancy are three distinct amniotic sacs forming a triangle or ipsilon zone within a single chorionic cavity. After prudential counseling about the potential risk of a monochorionic triamniotic triplet pregnancy with the patient, selective reduction of two fetuses via radiofrequency ablation was performed. We report a case of selective reduction for monochorionic triamniotic triplet pregnancy using radiofrequency ablation at 12 weeks' gestation and obstetric progression after radiofrequency ablation was uneventful until 20 weeks' gestation.
Deformation twinning, one of the major deformation modes in a crystalline material, has typically been analyzed using generalized planar fault energy (GPFE) curves. Despite the significance of these curves in understanding the twin nucleation and its effect on the mechanical properties of crystals, their experimental validity is lacking. In this comparative study based on the first-principles calculation, molecular dynamics simulation, and quantitative in-situ tensile testing of Al nanowires inside a transmission electron microscopy system, we present both a theoretical and an experimental approach that enable the measurement of a part of the twin formation energy of the perfect Al crystal. The proposed experimental method is also regarded as an indirect but quantitative means for validating the GPFE theory.
This study examined the effects of the in vitro produced (IVP) Hanwoo blastocyst stage (blastocyst, expanded blastocyst and hatched blastocyst), in vitro culture day (7, 8, and 9) and blastocyst grade (1, 2 and 3) on the pregnancy rate, gestation length, birth weight, the incidence of dystocia and twining rate after embryo transfer (ET). The pregnancy and abortion rates were significantly higher in the blastocyst (B) stage (64.4%) and in the hatched blastocyst (HB) stage (21.4%), respectively, than in those of the other developmental stages (p<0.05). The pregnancy rate of Day 7 embryos (49.0%) was significantly higher than those of Days 8 and 9 embryos (36.4 and 15.4%), but the abortion rates were similar (0 to 10.7%). There were no significant differences in the pregnancy (41.4 to 42.5%) and abortion (9.3 to 16.5%) rates among the three grades of embryos. There were no significant differences in gestation length, birth weight and the incidence of dystocia among the three development stages, but the twinning rate was significantly higher in the HB stage (p<0.05). The pregnancy rate, the incidence rate of dystocia and twinning rate were similar among the three different culture days, however birth weight was significantly heavier in calves from Day 9 embryos than in those from Days 7 and 8 embryos. The mean gestation length of grades 1 and 2 embryos (278.5 and 276.1 days) were significantly longer than that of grade 3 (p<0.05), but birth weight, the incidence of dystocia and twinning rate did not significantly differ. The mean gestation length in single calves was significantly longer than that in twin calves (278.5 vs. 272.5 days, p<0.05). In addition, the mean birth weight in single calves was significantly greater than that in twin calves (29.6 vs. 22.3 kg, p<0.05). Finally, the sex ratios and mean mortality rates between single and twin calves were similar.
In order to understand the high temperature deformation behavior of superalloy 718, a rotating grade 718 alloy has been compression tested to about 0.7 upset ratio at $927{\sim}1066^{\circ}C$ temperature range and $5{\times}10^{-4}{\sim}5{\times}10^0sec^{-1}$ strain rate. The maximum flow stress was increased with increasing strain rate, and similar behavior was observed with decreasing temperature. At low temperature and high strain rates other than $5{\times}10^{-1}sec^{-1}$, strain softening was occurred mainly by dynamic recovery and deformation twinning processes, while at high temperature and low strain rates strain softening was offseted by dynamic recrystallization. At $5{\times}10^{-1}sec^{-1}$, strain hardening was occurred due to work hardening of the dynamic recrystallized grains. Strain rate sensitivity, m, was varied with strain rates. In the case of lower strain rate tests, m was measured as 0.3 and it was observed that the deformation was mainly controlled by dynamic recrystallization. At higher strain rate, m was lowered to 0.1 and the deformation was controlled by the dynamic recovery and the deformation twinning processes.
Induction of twinning was attempted by transfer of two whole- or demi-embryos in Holstein cows and heifers. Cows were superovulated with follicle stimulating hormone(FSH) administered twice daily in intra-muscular injection. On day of 6.5 to 7 post-estrus, embryos were collected nonsurgically, Normal morulae and early balstocysts were obtained from superovulated cows. The embryos were hisected with a micro-blade made from a razor. Twenty seven pairs of half embryos were successfully produced and 23 pairs of half embryos were transferred to recipients( Group A). Twenty cows were treated with low unit of FSH (3mg${\times}$2,2mg${\times}$2 ; Group B1, 2mg${\times}$2, 1mg${\times}$2, 1mg${\times}$2 ; Group 32) to induce double or triple ovulations. The cows of Group B1 and B2 were Inseminated artificially(A1) at following estrus. Twenty four heifers were bred by A1 and received an additional embryo into the uterine horn contralateral to the corpus luteum(CL) 6 days later(Group C). One embryo was transferred into each uterine hem of 16 heifers 6 days after estrus(Group D). Fourteen heifers were received two embryos into the uterine horn ipsilateral to the CL at day 6 of estrous cycle(Group I). Pregnancy rates at 60 days in Group A, B1, B2, C, D and E were 34.8%, 70.0%, 60.0%, 66.7%, 62.5% and 57.1%, respectively. Twinning rates were 8.7%, 20.0%, 10.0%, 16.7%, 18.7% and 21.4%, respectively. The present experiments demonstrate that FSH treatment( Group 31) and ipsilateral transfer( Group I ) of two whole-embryos are more useful methods to produce twins than the others.
Calcite twins were analyzed in six oriented samples of the Pungchon limestone, Joseon Supergroup, to reconstruct the paleostress field. The orientations of c-axis of calcite and e twin plane were measured along with the average thickness and numbers of twins, and the widths of calcite grains. Twin strain, mean width, and intensity of twinning, and the relative magnitude and orientations of principal stresses were calculated using Calcite Strain Gauge program. Twin strain, mean width, and intensity of twinning showed ranges of 1.09-15.36%, 0.53-3.72 ㎛ and 21.0-53.1 twim/mm, respectively. Metamorphic temperatures calculated from the twins were 170-200℃, indicating that the twins developed after the Pungchon limestone was uplifted to at least half of the maximum burial depth. Results for five of the samples indicate that the calcite twins formed during two events with principal stress axes of different orientations, while the remaining sample recorded only one event that produced calcite twins. The axis of maximum compressive stress was oriented mainly WNW-ESE to ENE-WSW, and to a lesser degree NW-SE and NE-SW. Comparison of paleostress orientations measured here and in other studies indicates that most twins were produced during the Songrim orogeny. However, the Daebo orogeny and the Bulguksa orogeny also produced calcite twins in the Punchon limestone.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.