• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1455-1460
• /
• 2014

Wind turbine generators were designed on general regulations of wind condition. At real situations, it could be different from the design conditions. There are many control methods and definitions of transient region, because an efficient wind turbine generator control logic is the important matter in generator performance and annual energy production at real conditions. In this document, the power generation sensitivity for wind speed and turbulence intensities was defined to know the sensitive transient region. Wind conditions are applied for the ranges of 7~10m/s mean wind speed and 14~20% turbulence intensity. The sensibility of HR-D86 wind generator was increased in transient region(8~10m/s) on power curve diagram through a torque control to a pitch control. And then GH-bladed simulations was performed for performance analysis of the torque mode switching in transient region on 2MW direct drive wind generator(HR-D86) which is designed IEC class II for onshore. Through the sensitivity and performance analysis, the sensitivity for real wind condition could be the performance index for an wind generator. And the torque mode switching in transient region can increase the mean power generation on HR-D86 wind turbine generator.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2010

Since emission regulations for vehicles have become more stringent, SCR technology has drawn a strong attention in order to reduce NOx emissions. Optimal design of a reductant injection nozzle and a multi-hole plate located between the cone and catalyst is critical in that the uniform distribution of reductant is necessary to maximize the NOx conversion efficiency and minimize the slip of reductant in SCR. In this work, an LPG fuel(C3H8 in vapor state) was used as a reductant for LPG vehicles. A Realizable k-$\varepsilon$ model is used for turbulence, and SCR body is defined as porous media with inertia and viscous resistances measured in this work. Effect of the number of nozzle holes on the flow mixing index was analyzed, which revealed that a four hole nozzle shows the best performance in terms of uniformity of flow. An installment of a multi-hole plate at the entrance of catalyst was evaluated with flow mixing index, uniformity of flow, and pressure drop. A multi-hole plate with gradual hole diameter change in three steps showed the best uniformity of flow within the conditions suggested in this work.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.139-144
• /
• 1998

Introduced into korea to diversify risk coming from the fluctuation of stock price with opening of the domestic capital market to foreigners, Suppress the turbulence of the dentistic securities market caused by the short term funds from foreign countries and vitalize investment in stock, the hedging transaction of stock index futures will promote the introduction of financial futures and commodity futures transaction. and it will contribute to enhancing the introduction all over the country and accelerating the advancement of the korea banking market. In addition, it is expected to make a great contribution to economic stability and smooth comic activity through its function of risk diversification and price decrement with the launch of the stock index futures.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.371-381
• /
• 2015

In the mountain streams in Jeju Island, strong turbulence and roughness usually made it nearly impossible to utilize most of intrusive instrumentation for streamflow discharge measurements. Instead, a non-intrusive fixed electro-magnetic wave surface velocimetry (fixed EWSV: Kalesto) became alternatively popular in many representative streams to measure stream discharge seamlessly. Currently, Kalesto has shown noteworthy performance with little loss in flood discharge measurements and also has successfully provided discharge for every minute. However, Kalesto has been operated to regard its measured one-point velocity as the representative mean velocity for the given cross-section. Therefore, it could be highly possible to potentially encompass discharge measurements errors. In this study, we analyzed the difference between such Kalesto discharge measurements and other alternative concurrent discharge measurements such as Acoustic Doppler Current Profiler (ADCP) and mobile EWSV which were able to measure velocity in multi-points in the cross-section. Consequently, Kalesto discharge deviated from ADCP discharge in amount of 48% for relatively low flow, and more than 20% difference for high flow compared with mobile EWSV discharge measurements. These results indicated that the one-point velocity measured by Kalesto should be used as a cross-sectional mean velocity, rather it should be accounted for as an index-velocity in conjunction with directly measured cross-sectional mean velocity by using more reliable instrumentations. After inducing Kalesto Discharge Correction Coefficient (KDCC) that actually means relationship between index velocity and cross-sectional mean velocity, the corrected discharge from Kalesto was significantly improved. Therefore, we found that index velocity method should be applied to obtain better accuracy of discharge measurement in case of Kalesto operation.

• Atmosphere
• /
• v.33 no.5
• /
• pp.519-530
• /
• 2023

Deep convection can make adverse effects on safe and efficient aviation operations by causing various weather hazards such as convectively-induced turbulence, icing, lightning, and downburst. To prevent such damage, it is necessary to accurately predict spatiotemporal distribution of deep convective area near the airport and airspace. This study developed a new index, the Aviation Convective Index (ACI), for deep convection, using the operational global Unified Model of the Korea Meteorological Administration. The ACI was computed from combination of three different variables: 3-hour maximum of Convective Available Potential Energy, averaged Outgoing Longwave Radiation, and accumulative precipitation using the fuzzy logic algorithm. In this algorithm, the individual membership function was newly developed following the cumulative distribution function for each variable in Korean Peninsula. This index was validated and optimized by using the 1-yr period of radar mosaic data. According to the Receiver Operating Characteristics curve (AUC) and True Skill Score (TSS), the yearly optimized ACI (ACI_YrOpt) based on the optimal weighting coefficients for 1-yr period shows a better skill than the no optimized one (ACI_NoOpt) with the uniform weights. In all forecast time from 6-hour to 48-hour, the AUC and TSS value of ACI_YrOpt were higher than those of ACI_NoOpt, showing the improvement of averaged value of AUC and TSS by 1.67% and 4.20%, respectively.

• ALGAE
• /
• v.22 no.3
• /
• pp.209-219
• /
• 2007

Marine algal flora and community structure of medicinal seaweeds were examined at Kkotji of Taean Peninsula, Korea from May 2005 to January 2006. Seventy-nine seaweeds including 42 medicinal algae and one marine plant were identified. Sargassum thunbergii was the representative alga occurred at all seasons and shore levels. The dominant medicinal seaweeds were perennial S. thunbergii, Neorhodomela aculeata, and Corallina pilulifera, and ephemeral Monostroma grevillei, Porphyra yezoensis, and Ulva pertusa. Their vertical distribution were N. aculeata – P. yezoensis, M. grevillei, and U. pertusa – C. pilulifera from high to low intertidal zone. The average biomass of medicinal seaweeds varied from 34.17 g m–2 in spring to 56.41 g m–2 in summer. At Kkotji shore, the opportunistic species (Enteromorpha, Ulva, and Cladophora) and turf-forming algae (Caulacanthus okamurae and Gelidium divaricatum) were easily observed. Such fast growing ESG II (ecological state group) was 87.50% and slow growing perennial algae, ESG I was only 12.15%. Also, diversity index (H’) and dominance index (DI) indicate that the seaweed community of Kkotji is unstable. Therefore, Kkotji rocky shore should be more protected from human activities such as turbulence and eutrophication in order to maintain species diversity and abundance of medicinal seaweeds.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.27-34
• /
• 2020

The study investigates herding behavior in cryptocurrencies in different situations. This study employs daily returns of major cryptocurrencies listed in CCI30 index and sub-major cryptocurrencies and major stock returns listed in Dow-Jones Industrial Average Index, from 2015 to 2018. Quantile regression method is employed to test the herding effect in market asymmetries, inter-dependency and intra-dependency cases. Findings confirm the presence of herding in cryptocurrency in upper quantiles in bullish and high volatility periods because of overexcitement among investors, which lead to high volume trading. Major cryptocurrencies cause herding in sub-major cryptocurrencies, but it is a unidirectional relation. However, no intra-dependency effect among cryptocurrencies and equity market is observed. Results indicate that in the CKK model herding exists at upper quantile in market that may be due when the market is moving fast, continuously trading, and bullish trend are prevailing. Further analysis confirms this narrative as, at upper quantile, the beta of bullish regime is negative and significant, meaning the main source of market herding is a bullish trend in investment, which increases market turbulence and gives investors opportunity to herd. Also, we found that herding in cryptocurrencies exits in high volatility periods, but this herding mostly depends on market activity, not market movement.

• Membrane and Water Treatment
• /
• v.3 no.4
• /
• pp.221-230
• /
• 2012

This study employed the modified fouling index (MFI) to determine the performance of a two-step recycling system - a membrane filtration integrated laminar flow water storage (LFWS) tank followed by an ion exchange process to reclaim ultrapure water (UPW) from the wastewater generated from semiconductor wafer backgrinding and sawing processes. The first step consisted of the utilization of either ultrafiltration (UF) or nanofiltration (NF) membranes to remove solids in the wastewater where the second step consisted of an ion exchanger to further purify the filtrate. The system was able to produce high purity water in a continuous operating mode. However, higher recycling cost could be incurred due to membrane fouling. The feed wastewater used for this study contained high concentration of fine particles with low organic and ionic contents, hence membrane fouling was mainly attributed to particulate deposition and cake formation. Based on the MFI results, a LFWS tank that was equipped with a turbulence reducer with a pair of auto-valves was developed and found effective in minimizing fouling by discharging concentrated wastewater prior to any membrane filtration. By comparing flux behaviors of the improved system with the conventional system, the former maintained a high flux than the latter at the end of the experiment.

• Current Optics and Photonics
• /
• v.8 no.1
• /
• pp.30-37
• /
• 2024

Implemented at the Geochang Observatory in South Korea, our slope detection and ranging (SLO-DAR) system features a 508 mm Cassegrain telescope (f /7.8), incorporating two Shack-Hartmann wave-front sensors (WFS) for precise measurements of atmospheric phase distortions, particularly from nearby binary or double stars, utilizing an 8 × 8 grid of sampling points. With an ability to reconstruct eight-layer vertical atmospheric profiles, the system quantifies the refractive index structure function (C_n²) through the crossed-beam method. Adaptable in vertical profiling altitude, ranging from a few hundred meters to several kilometers, contingent on the separation angle of binary stars, the system operates in both wide (2.5 to 12.5 arcminute separation angle) and narrow modes (11 to 15 arcsecond separation angle), covering altitudes from 122.3 to 611.5 meters and 6.1 to 8.3 kilometers, respectively. Initial measurements at the Geochang Observatory indicated C_n² values up to 181.7 meters with a Fried parameter (r₀) of 8.4 centimeters in wide mode and up to 7.8 kilometers with an r₀ of 8.0 centimeters in narrow mode, suggesting similar seeing conditions to the Bohyun Observatory and aligning with a comparable 2014-2015 seeing profiling campaign in South Korea.

• Journal of computational fluids engineering
• /
• v.13 no.2
• /
• pp.20-26
• /
• 2008

A numerical study is carried out to analyze the steady three-dimensional turbulent flow and convective heat transfer in a staggered pin-fin array with diamond shaped elements at various geometrical configurations. Steady Reynolds-averaged Navier-Stokes equations and energy equation are solved using a finite volume based solver. Shear stress transport (SST) model is used as turbulence closure. The computational domain is composed of one pitch of pin-fin displacement with periodic boundary conditions on the surfaces normal to the streamwise direction and the cross-streamwise direction. The numerical results for Nusselt number and friction factor are validated with experimental results. The effects of pin angle, pin height and pitch on Nusselt number, friction factor and efficiency index are investigated.