• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1296-1304
• /
• 2000

A program of steady-state and transient performance analysis for a 200kW-class small turboshaft engine with free power turbine was developed. An existing turbojet engine was used for the gas generator of the developed turboshaft engine, which was modified to satisfy performance requirements of this turboshaft engine. To verify the accuracy of steady-state performance program for this engine: the program was applied to the gas turbine test unit of the same type, and the analysis results were compared with experimental results. The developed transient performance analysis program using the CMF (Constant Mass Flow) method was utilized to analyze the cases of step increase and ramp increase of the fuel.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.253-256
• /
• 2003

65마력급 UAV용 초소형 터보샤프트 엔진의 코어를 55lbf급 터보제트 형식으로 개조 개발하였다. 터보샤프트 엔진의 동력발생기와 동일한 유량 특성을 갖는 배기 노즐을 부착함으로써 코어 엔진은 완제 엔진과 완전히 동일한 기계적, 공력적 특성을 보유하고 있다. 엔진 출력은 축 마력 대신 비교적 계측이 용이한 추력으로 나오기 때문에 터보샤프트 엔진의 성능과 수명을 좌우하는 코어의 검증 시험 용도로 매우 유용하다. 뿐만 아니라 코어 엔진은 그 자체로 하나의 터보제트엔진으로 추력이 필요한 소형 비행체의 추진기관으로 직접적인 활용이 가능하다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.97-104
• /
• 2008

Most of engine control systems for helicopter turboshaft engines are equipped with dual sensors. For the system with dual redundancy, analytic methods are used to detect faults based on the system dynamical model. Helicopter engine dynamics are affected by aerodynamic torque induced from the dynamics of the main rotor. In this paper an engine model including the rotor dynamics is constructed for the T700-GE-700 turboshaft engine powering UH-60 helicopter. The singular value decomposition(SVD) method is applied to the developed model in order to detect sensor faults. The SVD method which do not need an additional computation to generate residual uses the characteristics that the system outputs in direction of the left singular vector if an input is applied in direction of the right singular vector. Simulations show that the SVD method works well in detecting and isolating the sensor faults.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.34-42
• /
• 2009

Gas turbine performance diagnostics is a method for detecting, isolating and quantifying faults in gas turbine gas path components. On-line precise fault diagnosis can promote greatly reliability and availability of gas turbine in real time operation. This work proposes a GUI-type on-line diagnostic program using SIMULINK and Fuzzy-Neuro algorithms for a helicopter turboshaft engine. During development of the diagnostic program, a look-up table type base performance module are used for reducing computer calculating time and a signal generation module for simulating real time performance data. This program is composed of the on-line condition monitoring program to monitor on-line measuring performance condition, the fuzzy inference system to isolate the faults from measuring data and the neural network to quantify the isolated faults. Evaluation of the proposed on-line diagnostic program is performed through application to the helicopter engine health monitoring.

• 항공우주시스템공학회지
• /
• 제8권4호
• /
• pp.1-6
• /
• 2014

This paper presents the trade-off study of conducting a survey of the weights for various kind of propulsion systems installed in the Smart Unmanned Aerial Vehicle TR-100, a tilt-rotor vehicle, which is developed by Korea Aerospace Research Institute, in order to predict the appropriate propulsion system for present and future Personal Air Vehicle, which has single mode and vertical take-off & landing. In order to perform the trade-off study, we set the requirements that the vehicle hovers for 1 hour with 1,000 kg maximum take off weights. In this study, the power systems are classified engine, which uses the fossil fuel - turboshaft engine, piston engine, diesel engine and rotary engine, and electric motor with fuelcell or Li-Ion battery. The results of trade-off study shows the power systems using fossil fuel are superior to using fuelcell or Li-Ion battery for weight of propulsion system. Also turboshaft engine is the best power system for the aspects of system weight, and the nexts are rotary engine, piston engine, diesel engine, electric motor with Li-Ion battery, and electric motor with fuelcell.

• 한국추진공학회지
• /
• 제14권4호
• /
• pp.59-64
• /
• 2010

터보샤프트 엔진의 고공성능시험에서 주요 성능 인자인 축마력, 연료 유량, 비연료 소모율 및 공기유량에 대하여 측정의 수학적 모델을 제시하고 측정 불확도를 평가하였다. 터보제트 및 터보팬 엔진의 경우와 비교하여 차이점을 논의하였다. 시험 조건의 측정 불확도를 평가하였으며, 이를 보정된 성능 데이터 측정 불확도에 반영하는 방법을 제시하였다. 실제 터보샤프트 엔진 고공성능시험설비를 이용한 시험 사례에 대한 측정 불확도 평가 결과를 제시하였다. 주요 성능 인자의 측정 불확도는 시험 조건측정의 불확도를 반영하였을 경우 0.65~1.09%, 반영하지 않았을 경우 0.36~0.94%로 평가되었다.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.46-52
• /
• 2024

엔진 시운전실은 엔진의 성능 및 운용 특성 요구도를 적절하게 검증할 수 있도록 통제된 시험 환경을 제공해야 한다. 하지만 시운전 설비마다 구조 및 특성이 완전히 같을 수는 없기 때문에, 신규 시운전실은 기준 시운전실과의 Correlation 시험을 통해 시험 결과의 신뢰성을 검증하고 차이점을 보정하는 과정이 필요하다. 본 논문에서는 터보팬과 터보샤프트 엔진의 공통점과 차이점을 바탕으로 Correlation 시험을 수행할 때 고려사항들을 연구하였으며, 경험에 따른 Correlation 시험 절차의 예시를 제시하였다. 향후 본 연구가 엔진 종류에 따른 시험 설비의 인증 표준을 설정하는 것에 도움을 줄 것으로 기대한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.97-100
• /
• 2006

An ejector is designed for the purpose of engine bay cooling and exhaust gas cooling. The primary flow of the ejector is the exhaust gas of the turboshaft engine. The mass flow of secondary flow is calculated by using the approximate analytic equation. For the purpose of verification of approximate method, comparison is made with the results of Navier-Stokes turbulent flow solution. According to the results of CFD, the mixing of two flows is incomplete due to the short length of mixing duct.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.464-467
• /
• 2008

An ejector is designed for the purpose of engine bay cooling. The primary flow of the ejector is the exhaust gas of the PW206C turboshaft engine. The mass flow of secondary flow is calculated by using the approximate analytic equation. And the effect of exhaust gas flow on the fuselage surface is investigated by using the Fluent Code. Three types of exhaust duct shape were compared in the viewpoint of surface temperature and aerodynamic drag. As a result, exhaust duct shape P3 shows minimum interference of exhaust gas and fuselage and minimum increment of drag among the three candidate shapes.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.88-95
• /
• 1999

This paper introduces the part of efforts to develop a derivative type turboshaft engine from an existing baseline engine for multi-purpose helicopters aiming at 4000 kg of take-off weight for 10-12 passengers. As a first step in meeting the development goal of increasing the output power from 720 hp to 840hp with minimum modification, a two stage axial compressor was redesigned to obtain the higher pressure ratio by removing the inlet guide vane and increasing the chord length. As a result, a two stage axial compressor was designed to facilitate a flow rate of 3.04 kg/s, a pressure ratio of 2.01 and an adiabatic efficiency of $85\%$. Its performance tests were carried out and verification of test results and redesign are under progress. Aerodynamic and structural analyses of the preliminary design are mainly described in this paper.