• 한국재료학회지
• /
• 제12권9호
• /
• pp.691-695
• /
• 2002

A low temperature anode-supported tubular solid oxide fuel cell was developed. The anode-supported tube was fabricated using extrusion process. Then the electrolyte layer and the cathode layer were coated onto the anode tube by slurry dipping process, subsequently. The anode tube and electrolyte were co-fired at $140^{\circ}C$, and the cathode was sintered at $1200^{\circ}C$. The thickness and gas permeability of the electrolyte depended on the number of coating and the slurry concentration. Anode-supported tube was satisfied with SOFC requirements, related to electrical conductivity, pore structure, and gas diffusion limitations. At operating temperature of $800^{\circ}C$, open circuit voltage of the cell with gastight and dense electrolyte layer was 1.1 V and the cell showed a good performance of 450 mW/$\textrm{cm}^2$.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.289-294
• /
• 2002

Unlike Tubular Steel Tower, This Composite Material Tower is a low-technology Component, whose design is easy to optimize, and which therefore during the design process-lends itself easily as an object for possible cost reduction at very little effort. This may come in useful as the cost of a tower usually significant part of the total cost of a structure. This paper is written by the Composite Materials Tower which loaded Complex loading in Off and On shore. This Composite Material Tower is made by the Method of Filament Winding, and the Component of Composite Material is used by the Roving RS220PE-535. When it loaded Complex trading, there is a results which is bigger than steel tower deflection. We controlled this 1a18e deflection by stiffeners which has thickness 20mm. At last, Off and On Shore Tower which used Composite Materials is compared with Off and On Shore Tower which used Steel.

• Carbon letters
• /
• 제27권
• /
• pp.35-41
• /
• 2018

Surfactant-wrapped separation methods of metallic and semiconducting single-walled carbon nanotubes (SWCNTs) can result in large changes in intrinsic physical and chemical properties due to electronic interactions between a nanotube and a surfactant. Our approach to synthesize SWCNTs with an electronic feature relied on utilizing carbon nanorings, [n] cycloparaphenylenes ([n]CPPs), which are the fundamental unit of armchair type SWCNTs (a-SWCNTs) that possess a metallic feature without any surfactants. To obtain long tubular structures from [n]CPPs, the host-guest complexes formed with well-aligned [n]CPP hosts and various fullerene guests on a silicon substrate were pyrolyzed under an ethanol gas flow at a high temperature with focused-ultraviolet laser irradiation. The pyrolyzed [n]CPPs were observed to transform from nanorings to tubular structures with 1.5-1.7 nm diameters corresponding to the employed diameter of [n]CPPs. Our approach suggests that [n]CPPs are useful for structure-controlled synthesis of SWCNTs.

• Applied Microscopy
• /
• 제34권2호
• /
• pp.139-143
• /
• 2004

돌돔 아가미의 미세구조를 광학현미경과 투과전자현미경을 이용하여 관찰하였다. 아가미는 새궁 앞, 뒤 2열로 된 빗모양의 많은수의 새엽과 그리고 각 새엽은 전후 두 개의 새판(gill lamellae)이 근접하여 2열로 배열되어 있다. 상피세포층은 단층으로 큰 핵을 가진 편평상피로 구성되고 표면에는 미세융기가 잘 발달되어 있다. 새판의 기둥 구조는 세로 방향의 미세소관들과 측면 membrane interdigitation을 가지며, 염세포는 수많은 미토콘드리아와 tubular system이 잘 발달되어 있다. 미성숙된 점액세포는 조면세포체와 골지체가 잘 발달되었으며 일부 발달된 점액 과립을 가지고 있다. 성숙한 점액세포는 AB-PAS에 푸른 색을 띄었으며 구형이고 다양한 전자밀도를 가진 거의 같은 크기의 점액과립을 가지고 있다.

• 한국임상수의학회지
• /
• 제37권4호
• /
• pp.227-230
• /
• 2020

A 8-year-old spayed female Korean short-haired cat was presented with respiratory distress. CBC, serum chemistry analysis, plain radiography, and abdominal ultrasonography were performed. Besides hypertrophic cardiomyopathy (HCM) suspected by the thoracic radiograph, a tubular, tortuous soft tissue structure was detected at the region of the left retroperitoneal cavity on the abdominal radiograph. On the abdominal ultrasonography, a shunt vessel is identified caudo-lateral to the left kidney region. These findings are consistent with spleno-systemic shunts in cats. Furthermore, portal hypertension and diffuse hepatic lesion were also identified. Although the cause of a shunt vessel is not easy to diagnose, it is important to include spleno-systemic shunt into differential diagnosis list, when convoluted, tubular soft tissue opacity is seen on the digital radiography (DR). This report will allow clinicians to raise awareness of complications of portosystemic shunt (PSS) and better treat PSS suspected feline patients when the advanced modalities such as computed tomography and magnetic resonance imaging are not available.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.313-325
• /
• 2018

Concrete-filled steel tubular (CFST) members are commonly used as composite columns in modern construction. However, the current guidelines for members' fire design (EN1994-1-2) have been proved to be unsafe in case the relative slenderness is higher than 0.5. In addition, the simplified design methods of Eurocode 4 are limited to circular and square CFST columns, while in practice columns with rectangular and elliptical hollow sections are being increasingly used because of their architectural aesthetics. In the last years a large experimental research has been carried out at Coimbra University on the topic. They have been tested concrete filled circular, square, rectangular and elliptical hollow columns with restrained thermal elongation. Some parameters such as the slenderness, the type of cross-section geometry as well as the axial and rotational restraint of the surrounding structure to the column have been tested in order to evaluate their influence on the fire resistance of such columns. In this paper it is evaluated the influence of the boundary conditions (pin-ended and semi-rigid end-support conditions) on the behavior of the columns in case of fire. In these tests it could not be seen a marked effect of the tested boundary conditions but it is believed that the increasing of rotational stiffness increases the fire resistance of the columns.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.153-173
• /
• 2023

Rectangular concrete-filled steel tubular (RCFST) column, a type of concrete-filled steel tubular (CFST), is widely used in compression members of structures because of its advantages. This paper proposes a robust machine learning-based framework for predicting the ultimate compressive strength of RCFST columns under both concentric and eccentric loading. The gradient boosting neural network (GBNN), an efficient and up-to-date ML algorithm, is utilized for developing a predictive model in the proposed framework. A total of 890 experimental data of RCFST columns, which is categorized into two datasets of concentric and eccentric compression, is carefully collected to serve as training and testing purposes. The accuracy of the proposed model is demonstrated by comparing its performance with seven state-of-the-art machine learning methods including decision tree (DT), random forest (RF), support vector machines (SVM), deep learning (DL), adaptive boosting (AdaBoost), extreme gradient boosting (XGBoost), and categorical gradient boosting (CatBoost). Four available design codes, including the European (EC4), American concrete institute (ACI), American institute of steel construction (AISC), and Australian/New Zealand (AS/NZS) are refereed in another comparison. The results demonstrate that the proposed GBNN method is a robust and powerful approach to obtain the ultimate strength of RCFST columns.

• Applied Microscopy
• /
• 제18권2호
• /
• pp.153-166
• /
• 1988

The fine structure of the salivary glands of the pine moth, Dendrolimus spectabilis Butler, at the last larval period is observed using light and electron microscopes. The moths have single paired tubular salivary glands which openings are connected to the oral cavity through the upper jaw. By the external morphology and its functions, the glands are subdivided into three regions which are anterior reabsorptive region, middle storage region and posterior secretory region. Along the inner canal of the salivary gland two columns of the large glandular cells are connected each other and oriented to ring-like forms. By this cellular orientation, the glands have long and large tubular structure. From anterior to posterior region large nuclei of the glands are ramified like twigs of the tree, and in the cytoplasm of the cell numerous mitochondria and vacuoles are seen. Moreover, basal plasma membranes of the gland cells are heavily infolded. The anterior region of the glands keeps several characteristics related to the reabsorption of the material from the inner cavity to the glandular cells whereas, main salivary material is synthesized and secreted through the long and convoluted posterior region. The apical plasma membranes of the cells are the most heavily invaginated at the posterior regoin, but trachea and tracheoles are distributed only at the middle and posterior regions. In the cytoplasm of the middle region Golgi complexes appeared at the vicinity of the vesicles, and at the posterior region of the salivary glands multivesicular bodies are also observed.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.229-234
• /
• 2004

수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.

• 한국터널지하공간학회 논문집
• /
• 제5권4호
• /
• pp.401-409
• /
• 2003

최근 지속적으로 늘어나는 인구와 교통량의 증가로 인하여 도심지국토이용 및 차도가 포화상태가 되어 지하공간의 활용이 매우 절실하게 되었다. 이에 지하 운송수단 및 지하상가 등 지하구조물이 증가하게 되었으며, 공사로 인한 지상의 교통지연, 불량한 지반조건 등으로 인한 각종 안전사고, 주변환경의 훼손, 소음진동에 의한 수많은 민원 발생 등은 사회적인 문제점으로까지 비약되는 경우가 발생하고 있다. 따라서 본 연구에서는 이런 문제점등을 해결함과 동시에 기존 지히구조물 축조공법으로는 안정성을 확보할수 없는 열악한 지반조건에도 안전하고 경제적으로 지하 구조물을 시공할 수 있도록 N.T.R.공법을 수정 보완하였다. 기존의 터널굴착 공법에서 많은 문제점으로 나타난 천정 및 벽체부의 누수문제와 이로 인한 안전성감소, 그리고 장기적인 유지보수 문제 등 시공상의 여러 단점을 보완하여 국내실정에 적합한 N.T.R. (NEW TUBULAR ROOF)공법을 개발하게 되었다. 본 논문에서는 N.T.R.공법 적용 구조물에 대한 수치해석의 결과와 현장 계측자료를 토대로 N.T.R.공법의 특징, 시공방법 및 국내 지하공간개발 적용가능성에 대하여 정리하였다.