• Applied Biological Chemistry
• /
• 제29권2호
• /
• pp.198-206
• /
• 1986

정제인삼(精製人蔘)사포닌의 수용액을 분자투석막(分子透析膜)(분자량(分子量) 12000)을 통(通)하여 투석(透析)하거나 Bio-Gel P-2(분자량(分子量) $200{\sim}2000$)gel을 통과시켜 분취(分取)하고 HPLC로 ginsenoside를 분석(分析)하였다. Ginsenoside는 분자결합양상(分子結合樣相)과 분자내(分子內) 친수성기(親水性基)의 공간배열(空間配列)에 따라 3군(群)으로 분류(分類)되었다. 제(第) I 군(群)은 거대(巨大)미셀 형성자(形成者)로 결합분자수(結合分子數)가 10이상이며 I면친수기형(面親水基形)이고 panaxadiol인 $Ginsenoside\;Rb_1$, $Rb_2$, Rc 및 Rd가 포함된다. 제(第)II군(群)은 소(小)미셀형성자(形成者)로 결합분자수(結合分子數)가 10이상(以上)에서 1까지이고 불완전(不完全) 양면친수기형(兩面親水基形)이며 triol인 $Rg_2$와 Rf 및 diol인 $Rg_3$가 포함된다. 제(第)III군(群)은 단분자(單分子)로 존재(存在)하며 양면친수기형(兩面親水基形)이고 triol인 Re와 $Rg_1$을 포함한다.

• Preventive Nutrition and Food Science
• /
• 제4권1호
• /
• pp.52-56
• /
• 1999

This study has examined the effects of Aralia elata Seemann ethanol extract on antioxidant enzyme systems inrats along with benzo($\alpha$) pyrene(B(a)P) administration . The ethanol extract of Aralia elata Seemann (50mg/kg body wt.) was fed to rats for 4 weeks by stomach tubing. The extract administration increased antioxidant activities of glutathione sulfur transferase(GST) comparing to the control. also total superoxide dismutase(SOD) and Cu, Zn-SOD activities were stimulated. Catalase activities were increased by 50% with the extract feeding compared to the control . Combined administration of B($\alpha$)P and the extract increased GST activity in B($\alpha$) P group. Although total SOD acitivity was decreased , Cu, Zn-SOD was greately increased from 0.10unit to 0.18 unit and catalase activity also was increased compared to the group of B($\alpha$) P. GST activity in CLE group was 1.32 unit, increased by 33% comparing to the group CL of 0.99unit. Cu, Zn-SOD and catalase activities in thegroup fed high fat and ethanol extracts were increased by 25% and 39%, respectivley comparing to the group of high fat. In addition , total SOD was decreased but, Cu, Zn-SOD acitivity was increased from 0.09 unit to 0.18unit. Catalase activity was 76.05 unit in the group of B($\alpha$) P and extract comparing to 65.26 units in B($\alpha$)P group. Serum $\alpha$-tocopherol of rat was markedly increased by theextract. Administration of B9$\alpha$)P reduced $\alpha$-tocopherol levels in the serum, on the other hand, lard in the diet increased $\alpha$-tocopherol levels in the serum. The above results indicate that Aralia bud exerts antioxidant functions in vivo against B($\alpha$)P. Further research may be necessary for the identification fo the biologically active material.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권3호
• /
• pp.379-385
• /
• 2004

Two trials in vivo and in vitro were conducted, in vivo to determine the apparent digestibility of gross energy, crude protein, dry matter, acid detergent fiber, neutral detergent fiber and apparent digestible energy in 10 corn by-products. In vivo the diets included one basal corn diet, four corn gluten meal diets, four corn distillers dried grains with solubles diets and two corn distillers dried grains diets using the different methods, 12 crossbred barrows weigh $40{\pm}$1.6 kg were allocated into individual metabolic crate, according to a $6{\times}6$ Latin square design. In vitro using flask technique, filter bag technique and dialysis tubing technique, the digestibilities of gross energy, crude protein and dry matter in corn gluten meal and corn distillers dried grains with solubles were investigated. Pepsin, pancreatin, intestinal fluid, rumen fluid and cellulase were used in incubation. The results showed that correlation coefficient was 0.73 in corn distillers dried grains with solubles between the digestibility of crude protein and acid detergent fiber in vivo (p<0.01); and correlation coefficient was 0.68 in corn distillers dried grains with solubles between the digestibility of gross energy and neutral detergent fiber in vivo (p<0.01). Apparent digestible energy (DE) of corn by-products in pig total tract was predicted by the percentage of crude protein (CP) and the content of gross energy (GE) in feedstuff. The equation: DE=5,601.09+26.69$\times$CP %-0.5904$\times$GE, ($R^2=0.72$). In vitro, filter bag technique was more convenient; furthermore, the digestibility for the treatments (pepsin+pancreatin+rumen fluid and pepsin+pancreatin+cellulase) was better.

• Archives of Plastic Surgery
• /
• 제36권2호
• /
• pp.183-187
• /
• 2009

Purpose: Because of the volume of elective sterilizations performed in the world during the past decade, the vasectomy was a popular method for male sterilization in Korea and this, in turn, had been followed by an increase in the number of patient requiring vasectomy reversal with the high rate of subsequent divorce and remarriage. Recently, many authors have reported high success rates of vasovasostomy using microsurgical techniques and we performed modified two layer vasovasostomy with intravasal silicone tube to increase postoperative patency and pregnacy rate. Methods: Microscopic vasovasostomy was performed in 9 patients and their average age was $35.78{\pm}1.36years$(from 28 years to 44 years) from June 2006 to June 2008 at our department using modified two layer vasovasostomy with silicone tube insertion. Standard Guibor silicone tube, consisting of two 17.7 cm, 0.064 cm diameter, malleable, stainless steel probes connected by 29 cm of silicone tubing wedged onto disposable probes, were used in all cases. Results: Success rates were 88.8 % for patency and pregnancy 44.4 % for pregnancy in modified two layer vasovasostomy with silicone tube insertion. The patency rates were higher in cases of long postoperative day and in cases of short duration of vasectomy and vasovasostomy. Conclusion: We used a modified method to correspond the patency and pregnancy rate in microscopical modified two layer vasovasostomy using the intravasal silicone tube permanently. This method brings normal patency in microsurgical vasovasostomy because the silicone tube prevent obstruction of anastomosed site of the vas permanently.

• Journal of Pharmaceutical Investigation
• /
• 제28권4호
• /
• pp.275-282
• /
• 1998

In order to develop a desirable in vitro release which correlates well with in vivo bioavailability, hollow type suppository containing Propranolol HCl(PPH) powder in the cavity and conventional type suppository with dispersed PPH in the base were prepared. Polyvinyl alcohol (PVA) hydrogel as a base and PPH as a model drug were used for the preparation of suppository. The rates of drug release from the suppositories were studied by Paddle method, Muranish method, Dialysis tubing method and Rotating dialysis cell method. The release profiles from suppositories using the four different release tests were compared. After a rectal administration in rat, the mean $C_{max}$ of hollow type suppository was significantly lower than that of conventional type, but $T_{max}$, $AUC_{0{\to}12}$ and MRT of hollow type were significantly higher 1.6 times, 1.2 times and 1.9 times than those of conventional type, respectively. The computer program was used to simulate plasma concentration from in vitro released amounts of drug and in vivo pharmacokinetic parameters. Based on comparison of the simulated bioavailability from computer program with experimental bioavailability in rat we have found out in vitro release test which correlates well with in vivo bioavailability. Our results have shown the best correlation between in vitro release and in vivo bioavailability in PPH-PVA hydrogel hollow type suppository for the paddle method and conventional type suppository for the rotating dialysis cell method. In this work we propose that PPH-PVA hydrogel suppository shows in vitro-in vivo correlation. This data should help to optimize the formulation of the drug and provide a basis for quality control procedures.

• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.222-229
• /
• 2012

점화 시의 분사기의 냉각은 분사순간의 초저온액체상태의 산화제 분무의 증기압에 영향을 미치고, 이는 연소반응에 따른 연소실 압력상승 과도단계에서 분무의 상(phase) 천이 시점을 결정하는 인자 중 하나이다. 분무의 상변화는 액체로켓 연소기의 점화특성에 큰 영향을 미치며, 액체산소/메탄 추진제를 사용하는 연료과잉 폐쇄형사이클 액체로켓엔진의 주연소기용 분사기로 사용될 수 있는 액체-기체 동축형 스월분사기에 대하여 점화초기 분사기 냉각온도에 따른 점화시험을 수행하였다. 초기 냉각온도에 따라 점화 시 산화제 분무의 액상으로의 천이시기가 달라지며, 충분한 냉각을 통해 산화제 분무의 증기압을 낮춘 경우 산화제 분무의 상 천이 시기를 나타내는 화염 quenching 현상이 일찍 나타나는 것을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.57-66
• /
• 2010

Since nuclear power plants are being operated under high temperature and high pressure, on-line monitoring technique to detect corrosion could be more effective than off-line method in shut-off period. In this operating condition, electrochemical noise method may be suitable to monitor the corrosion. This paper aims the analysis on the relation between the cracking and electrochemical noise signal of Alloy 600 under U-bending. When electrochemical noise monitoring technique was used during SCC test, it was judge to be obvious that if cracks generate, its generation can be detected by electrochemical current noise. Cracking-related noise was defined as the noise showing 5~10 times greater than the average value of background noise bands. On the base of crack noise, crack initiation time was determined. From SCC test and electrochemical noise monitoring in $25^{\circ}C$, 0.1 M $Na_2S_4O_6$ solution (Reverse U-Bended Alloy 600 SE+), average crack initiation time was obtained as 9,046 seconds and from its initiation time, it could be defined that net crack propagation rate is the crack length divided by ${\Delta}T$(= total test period - crack initiation time). Therefore, average net crack propagation rate was obtained to be $1.18{\times}10^{-9}\;m/s$.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.233-238
• /
• 2007

Due to the occasional occurrence of a localizedcorrosion such as a SCC and pitting in steam generator tubing(Alloy 600), leading to a significant economical loss, an effective repair technology is needed. For a successful electrodeposition inside a tube, many processes should be developed. Among these processes, an anode to be installed inside a tube, a degreasing condition to remove any dirt and grease, an activation condition for a surface oxide elimination, a strike layer forming condition which needs to be adhered tightly between an electroforming layer and a parent tube and a condition for an electroforming layer should be established. Through a combination of these various process condition parameters, the desired material properties can be acquired. Among these process parameters, various material properties including a mechanical property and its variation along with the height of the electrodeposit inside a tube as well as its thermal stability and SCC resistance should be assessed for an application in a plant. This work deals with the material properties of the Ni electrodeposits formed inside a tube by using the anode developed in this study such as the current efficiency, hardness, tensile property, thermal stability and SCC behavior of the electrodeposit in a 40wt% NaOH solution at $315^{\circ}C$. It was found that a variation of the material properties within the entire length of the electrodeposit was quite acceptable and the Ni electrodeposit showed an excellent SCC resistance.

• 한국식품과학회지
• /
• 제29권6호
• /
• pp.1316-1318
• /
• 1997

산 casein으로부터 FPLC를 이용하여 gel permeation column으로 ${\kappa}-Casein$을 분획한 다음, 이를 chymosin, pepsin, trypsin 으로 각각 처리하여 3% TCA에서 soluble한 부분을 증류수로 투석(MW cut-off 1kDa)시킨 후 ACE저해 효과를 측정한 결과, trypsin으로 분해 시킨 경우 ACE 저해율이 94.7%로 가장 높게 나타났으며, chymosin 가수분해물은 가장 낮았다. GMP를 투석막의 종류에 따라 투석 시킨 후 $IC_{50}$을 측정한 결과, MW cut-off 의 크기가 증가할수록 ACE저해효과는 감소하는 것으로 나타났으며, MW cut-off 2 kDa의 경우가 가장 높은 저해율을 보였고 MW cut-off 5kDa에서는 저해율이 가장 낮았다.