• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.2
• /
• pp.97-122
• /
• 2011

Fluid dynamics driven by pumping without valves (valveless pumping) shows interesting physics. Especially, the driving function to generate valveless pump mechanism is one of important factors. We consider a closed system of valveless pump which consists of flexible tube part and stiffer part. Fluid and structure (elastic tube) interaction motions are generated by the periodic compress-and-release actions on an asymmetric location of the elastic loop of tubing. In this work, we demonstrate how important the driving forcing function affects a net flow in the valveless circulatory system and investigate which parameter set of the system gives a more efficient net flow around the loop.

• Wind and Structures
• /
• v.32 no.2
• /
• pp.169-177
• /
• 2021

This study investigates the effects of blade configuration and solidity of Darrieus wind turbine on the starting torque characteristics. Generally, the configuration of Darrieus wind turbine is divided into Troposkien, parabola, Catenary, Sandia, modified-parabola and straight types. A numerical analysis has been carried out using Multiple Stream Tube (MST) method to investigate the effect of blade configuration and solidity of Darrieus wind turbine on the starting torque under the initial low range of rotational speed. The simulation results show that the starting torque of Darrieus wind turbine varies considerably depending on the blade configuration. The initial starting torque was larger with Troposkien, Parabola, Catenary, and Sandia configurations than with modified parabola or straight types. The increase in solidity with increasing number of blades raised the starting torque and improved the dynamic stability during the initial operational speed of Darrieus wind turbine. Additionally, these torque results represent basic data for fluid-structure interaction (FSI) simulation of the steady-dynamic operation of the turbine.

• Journal of Service Research and Studies
• /
• v.13 no.3
• /
• pp.1-19
• /
• 2023

Despite the growing importance of video-based social media content, such as vlogs, as a marketing tool in the travel industry, there is limited research on the characteristics that enhance engagement among potential travelers. This study explores the influence of emotional valence in YouTube travel content on viewer engagement, specifically likes and comments. We analyzed 4,619 travel-related YouTube videos from eight popular tourist cities. Using negative binomial regression analysis, we found that both positive and negative emotions significantly influence the number of likes received. Videos with higher positive emotions as well as negative emotions receive more likes. However, when it comes to the number of comments, only negative emotions showed a significant positive influence, while positive emotions had no significant impact. These findings offer valuable insights for marketers seeking to optimize engagement strategies on YouTube, considering the unique nature of travel products. Further research into the effects of specific emotions on engagement is warranted to improve marketing strategies. This study highlights the powerful impact of emotions on viewer engagement in the context of social media, particularly on YouTube.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.355-365
• /
• 2014

Concrete-filled tubes (CFTs) have been used in civil engineering practices as a column of buildings and a bridge pier. CFTs have several advantages over the conventional reinforced concrete columns, such as rapid construction, enhanced buckling resistance, and inherited confinement effect. However, CFT component have not been widely used in civil engineering practice, since the design provisions among codes significantly vary each other. It leads to conservative design of CFT component. In this study, the design provisions of AISC and EC4 for CFT component were examined, based on the extensive test results conducted by previous researchers and finite element analysis results obtained in this study. Especially, the focus was made on the validation of P-M interaction curves proposed by AISC and EC4. From the results, it was found that the current design codes considerably underestimated the strength of CFT component under general combined axial load and bending. Finally, the modified P-M interaction curve was proposed and successfully verified.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1547-1554
• /
• 2017

VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.97-107
• /
• 2015

An analytical model was developed to estimate the viscous and squeeze-film damping ratios of heat exchanger tubes subjected to a two-phase cross-flow. Damping information is required to analyze the flow-induced vibration problem for heat exchange tubes. In heat exchange tubes, the most important energy dissipation mechanisms are related to the dynamic interaction between structures such as the tube and support and the liquid. The present model was formulated considering the added mass coefficient, based on an approximate model by Sim (1997). An approximate analytical method was developed to estimate the hydrodynamic forces acting on an oscillating inner cylinder with a concentric annulus. The forces, including the damping force, were calculated using two models developed for relatively high and low oscillatory Reynolds numbers, respectively. The equivalent diameters for the tube bundles and tube support, and the penetration depth, are important parameters to calculate the viscous damping force acting on tube bundles and the squeeze-film damping forces on the tube support, respectively. To calculate the void fraction of a two-phase flow, a homogeneous model was used. To verify the present model, the analytical results were compared to the results given by existing theories. It was found that the present model was applicable to estimate the viscous damping ratio and squeeze-film damping ratio.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.633-640
• /
• 2014

In this research, the surface roughness affecting the pressure drop in a pipe used as the steam generator of a PWR was studied. Based on the CFD (Computational Fluid Dynamics) technique using a commercial code named ANSYS-FLUENT, a straight pipe was modeled to obtain the Darcy frictional coefficient, changed with a range of various surface roughness ratios as well as Reynolds numbers. The result is validated by the comparison with a Moody chart to set the appropriate size of grids at the wall for the correct consideration of surface roughness. The pressure drop in a full-scale U-shaped pipe is measured with the same code, correlated with the surface roughness ratio. In the next stage, we studied a reduced scale model of a U-shaped heat pipe with experiment and analysis of the investigation into fluid-structure interaction (FSI). The material of the pipe was cut from the real heat pipe of a material named Inconel 690 alloy, now used in steam generators. The accelerations at the fixed stations on the outer surface of the pipe model are measured in the series of time history, and Fourier transformed to the frequency domain. The natural frequency of three leading modes were traced from the FFT data, and compared with the result of a numerical analysis for unsteady, incompressible flow. The corresponding mode shapes and maximum displacement are obtained numerically from the FSI simulation with the coupling of the commercial codes, ANSYS-FLUENT and TRANSIENT_STRUCTURAL. The primary frequencies for the model system consist of three parts: structural vibration, BPF(blade pass frequency) of pump, and fluid-structure interaction.

• Applied Microscopy
• /
• v.21 no.2
• /
• pp.1-13
• /
• 1991

In order to investigate the factors of the control mechanism of somitogenesis, early chick embryos (H-H stage $8{\sim}13$) were treated with heat shock, ${\alpha}$-amanitin and cycloheximide and morphological changes of somite were examined by light microscopy, transmission and scanning electron microscopy. In normal chick embryo, somites were formed from the somitomere which preexisted in segmental plate. Somites were wrapped with extracellular collagen fibrils and connected with neural tube, notochord and ectoderm. And then, somites were differentiated to sclerotome, dermatome and myotome by the interaction of nervous tissue. Abnormal somites were observed after formation of six or seven so mites in heat shock treated group. Amounts of collagen fibrils were obviously decreased in this group. In cycloheximide treated group, most so mites were smaller and neural tube formation was incomplete. Chromatins were condenced and formed several heterochromatins in the nucleus of somite cells. Lipid like cytoplasmic dense mass and lipid droplets were also observed. Segmentation of somites seemed to be normal progress in ${\alpha}$-amanitin treated group. Center of somite, however, hollowed in longitudinal sectioned samples. These results suggested that so mites were already existed in the segmental plate as the form of somitomere. Segmented somites were contacted with neural tube or notochord and the somites were tightly connected with each other by the extracellular collagen fibrils which were secreted from neuroepithelium and somite cells. Somites are thought to differentiate into sclerotome, dermatome and myotome by these interactions.

• Transactions of Materials Processing
• /
• v.28 no.3
• /
• pp.135-144
• /
• 2019

Electromagnetic impulse welding (EMIW) is a type of solid state welding using the Lorentz force generated by interaction between the magnetic field of the coil and the current induced in the workpiece. Although many experimental studies have been investigated on the expansion and compression welding of tube using the EMIW process, studies on the EMIW process of lap joint between flat sheets are uncommon. Since the magnetic field enveloped inside the tube can be controlled with ease, the electromagnetic technique has been widely used for tube welding. Conversely, it is difficult to control the magnetic field in the flat sheet welding so as to obtain the required welding velocity. The current study analyzed the effects of coil shape on the impulse velocity for suitable flat one-turn coil for the EMIW of the flat sheets. The finite element (FE) multi-physics simulation involving magnetic and structural field of EMIW were conducted with the commercial software LS-DYNA to evaluate the several shape variables, viz., influence of various widths, thicknesses, gaps and standoff distances of the flat one-turn coil on the impulse velocity. To obtain maximum impulse velocity, the flat one-turn coil was designed based on the FE simulation results. The experiments were performed using an aluminum alloy 1050 sheets of 1.0mm thickness using the designed flat one-turn coil. Through the microscopic interfacial analysis of the welded specimens, the interfacial connectivity was observed to have no defects. In addition, the single lap joint tests were performed to evaluate the welding strength, and a fracture occurred in the base material. As a result, a flat one-turn coil was successfully designed to guarantee welding with bond strength equal to or greater than the base material strength.

• Journal of Fashion Business
• /
• v.27 no.3
• /
• pp.35-49
• /
• 2023

The purpose is to derive its aesthetic characteristics by objectifying the visual image of the YouTube campaign into adjectives. As a result, we intend to identify advertising strategies that use them as basic data for setting fashion design concepts. A group of experts in fashion majors watched each of them, wrote adjectives, and collected 75 adjectives. By analyzing the frequency of adjectives, aesthetic characteristics were derived with adjectives recording the upper number of times, and the results were obtained that they had the characteristics of deconstruction. The conclusions of this study are as follows. First, Tamburin's Jenny appeared to be strange, scary, rambling and charming. Among the internal meanings of deconstruction due to spatial, social, and psychological distance from consumers, it can be said that T.P.O's mutual textuality and play of interaction. Second, Gucci Cruise be chosen rural, strange, wild, unharmonious, and difficult, which is a mixture of intertextuality and play of T.P.O. Third, The Excise Gucci Campaign parodies that juxtaposes six films directed by Stanley Kubrick, making them strange, retro, difficult, interesting, and wrong. Deconstructionist de-genre and de-boundary Fourth, Kenzo World is weird, dynamic, wrong, difficult, difficult, and confused, which correspond to T.P.O's interactive textuality, play of the second half, and destruction and decomposition among the external expressions of deconstruction. Fifth, Burberry Hero emphasized the aesthetic value of traditional men, so it was ostensibly wild, free, powerful, sensual, and fantastic. Compared to the lifestyle of men who usually work at work, this corresponds to play of second best.