• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.281-292
• /
• 2004

Periodontal defects of the furcation are characterized by several inherent anatomic factors that can make successful periodontal therapy difficult and results unpredictable. The severity and rate of occurrence of periodontal disease are directly related to the location of the furcation relative to the cementa-enamel junction and anatomical form of the root by limiting the accessibility and effectiveness of the periodontal instrumentation. This study investigated the reliability and accuracy of panoramic radiograph diagnoses of the periodontal state of mandibular molars, particularly regarding the diagnosis of furcation area periodontal defects, treatment planning, and prognosis prediction. This study examined a total of 110 teeth belonging to 33 subjects (19 male, 14 female) presenting with incipient to moderate periodontitis 4-7mmpocket depth. The alveolar bone level, length and width of the root trunk, and root separation angle were measured using the panoramic radiograph and compared to the results taken directly by retracting a full-thickness flap. The results of the study are as follows: 1. Data regarding the alveolar bone level of the mandibular first molar showed that the directly taken surgical measurements resulted in $5.1{\pm}0.9mm$ that was slightly deeper than the corresponding panoramic measurement resulted in $4.8{\pm}0.8mm$, but these differences were statistically insignificant (p>0.05). 2. The data of the directly taken surgical measurement of the mandibular second molar $(5.1{\pm}1.1mm)$ was slightly deeper than the corresponding panoramic measurement $(4.7{\pm}1.2mm)$, but these differences were statistically insignificant (p>0.05). 3. The measured values of the length and width of the mandibular first molar root trunks were determined to be $4.1{\pm}0.6mm$ and $7.3{\pm}0.9mm$, respectively, while the values of the mandibular second molar root trunks were determined to be $4.6{\pm}1.3mm$ and $7.6{\pm}0.9mm$ respectively. The differences between these values were found to be statistically significant (p<0.01). 4. The measured values of the root separation angle showed that the mandibular first molars averaged $34.5{\pm}4.4^{\circ}$, while the mandibular second molars averaged $23.0{\pm}10.0^{\circ}$. The differences between these values were found to be statistically significant (p<0.01).

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.67-80
• /
• 1996

Eleven fruit bodies of Ganoderma sp. were collected from eight locations throughout the forest of Kangwon province and Kyunggi province in Korea. The hosts in forest were cut trunks of Quercus dentata, Q. variabilis, Prunus peria and Alnus japonica that was newly surveyed but 5 isolates were collected at the farms of Ganoderma mushroom. Most fruit bodies were formed solitarily on the cut trunks but GS-106 isolate grown in crowds on cut trunk of Alnus japonica. Optimal temperature ranges for isolates of species studied were: G. applanatum $28^{\circ}C{\sim}30^{\circ}C$, G. lucidum $28{\sim}30^{\circ}C$, G. neo-japonicum $28^{\circ}C$, and G. tsuage $26^{\circ}C$ and all the species grew slowly at the $32^{\circ}C$. Hamada medium adjusted with pH 5.4 and 6.2 is better than other media for mycelial growth. Mycelial morphological characteristics of six species were studied: G. applanatum, G. lucidum and G. neo-japonicum produced typical type of staghoru hyphae but G. oregonens and G. valeosiacum produced staghoru hyphae with a branch of grape form. Clamp connection was observed on hypha of G. applanatum, G. lucidum, G. oregonense and G. valeosiacum except G. neo-japonicum with node type. Chlamydospore was produced by G. applanatum, G. neo-japonicum. and cuticular cells were present on hyphae of G. lucidum, G. neo-japonicum, G.oregonense and G. tsugae.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.53-61
• /
• 2018

In this paper, we propose a car sealing monitoring system combined with ICT Technology. The automobile sealer is an adhesive used to bond inner and outer panels of doors, hoods and trunks of an automobile body. The proposed car sealer monitoring system is a system that can accurately and automatically inspect the condition of the automobile sealer coating process in the general often factory production line where the lighting change is very severe. The sealer inspection module checks the state of the applied sealer using an area scan camera. The vision inspection algorithm is adaptive to various lighting environments to determine whether the sealer is defective or not. The captured images and test results are configured to send the task results to the task manager in real-time as a smartphone app. Vision inspection algorithms in the plant outdoors are very vulnerable to time-varying external light sources and by configuring a monitoring system based on smart mobile equipment, it is possible to perform production monitoring regardless of time and place. The applicability of this method was verified by applying it to an actual automotive sealer application process.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.125-133
• /
• 2002

The purpose of this study was to develop a method for estimating 3-D coordinates of lower trunk muscles using orientation angles during a motion. Traditional 3-D motion analysis system with DLT technique was used to track down the locations of eight reference markers which were attached on the back of the subject. In order to estimate the orientations of individual lumbar vertebrae and musculoskeletal parameters of the lower trunk muscle, the rotation matrix of the middle trunk reference frame relative to the lower trunk reference frame was determined and the angular locations of individual lumbar vertebrae were estimated by partitioning the orientation angles (Cardan angles) that represent the relative angles between the rotations of the middle and lower trunks. When the orientation angles of individual intervertebral joints were known at a given instant, the instantaneous coordinates of the origin and insertion for all selected muscles relative to the L5 local reference frame were obtained by applying the transformation matrix to the original coordinates which were relative to a local reference frame (S1, L4, L3, L2, or L1) in a rotation sequence about the Z-, X- and Y-axes. The multiplication of transformation matrices was performed to estimate the geometry and kinematics of all selected muscles. The time histories of the 3-D coordinates of the origin and insertion of all selected muscles relative to the center of the L4-L5 motion segment were determined for each trial.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.19-27
• /
• 2008

Artichoke extracts are widely used alone or in association with other herbs for embittering alcoholic and soft drinks and to prepare herbal teas or herbal medicinal products in Viet Nam. The objective of this paper was a screening of flavonoids and total phenolic compounds content in the parts of artichoke (Cynara scolymus L.) as flowers, leaves, roots, trunks, stumps, The total phenolic compounds and flavonoids in the parts of artichoke were extracted among 3 extraction methods as methanol extraction (EM1), mixing methanol and water method (EM2) and water extraction method (EM3). Total phenolic compounds and flavonoids were determined by UV/VIS, HPLC techniques. The apigenin 7-O-glucosides, cynarin, narirutin, gallic acid, caffeic acid were found as the main flavonoids constituents in all parts of artichoke. It showed that value of total phenolic compounds and flavonoids by EM3 were higher than that of total phenolic compounds and flavonoids by EM1 and EM2. Furthermore, the results of this study revealed that total phenolic compounds and flavonoids, obtained by these convenient extraction methods, may show the quick efficacy of artichoke in all respects of their quality and quantity.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.45-55
• /
• 2003

This study was performed to find ways to improve the wearing comfort of high school boys' summer uniforms. The subjects were 640 boy students of high schools in Cheongju and Ansung city. The data was collected self-administered questionnaires to measure the actual wearing condition and the wearing satisfaction. Factor analysis, t-test, and F-test were used for data analysis. The results were as fellows: 1) Most students were wearing shirts made of polyester/rayon blended fabrics and pants made of wool/polyester blended fabrics. 2) Most students were wearing round neckline T-shirts or running shirts as underwears of the shirts, and trunks as pants. 3) About a half of respondents had altered their summer uniforms, and main alteration of their uniforms was focused on making their pants narrow. 4) The wearing satisfaction of uniforms were classifies into three factors: aesthetic, moving function, thermal comfort wearing sensation. 5) They evaluated the wearing sensation of school uniforms of shirts and pants with low satisfaction. 6) There were partially significant differences in three factors of the wearing satisfaction according to the uniform's fabrics, the wearing of underwear and the alteration of uniform.

• Journal of Korean Academy of Nursing
• /
• v.11 no.2
• /
• pp.9-21
• /
• 1981

The purpose of this study was to observe and describe the maternal attachment behavior during the mother's first interactions with her newborn and define the factors contributing to differences in maternal attachment behavior. Observations of the mother's first interaction with her newborn can offer valuable information about the mother-infant relationship, and it provides an opportunity for planning individulized care for them. Data was collected from Sep. 1, 1950 to Oct.30, 1980 at Ewha Womans University Hospital. Maternal attachment behaviors of healthy full-term infants were observed and recorded on the .maternal attachment tool and analysed by the use of means, standard deviations and ANEVA test. The following trends of maternal behaviors were observed: 1. Identifying behaviors was the predominant mode and all of the mothers inspects baby's body features. 2. Modalities of interaction, that is, touching was initiated on the babies extremities and heads (57.3%) rather than the trunks (8.7%) and mothers touched their infants with their fingertips (58.2%) more than palm touching (14.6%) 3. Care-taking activities performed by the mother were negligible at the first interaction. 4. Parity of mother, sex of infant, age of mother, planned pregnancy, length of visits by mother to infant appeared to have significant influence on the maternal attachment behaviors.

• The Korean Journal of Pain
• /
• v.31 no.1
• /
• pp.54-57
• /
• 2018

Burner or stinger syndrome is a rare sports injury caused by direct or indirect trauma during high-speed or contact sports mainly in young athletes. It affects peripheral nerves, plexus trunks or spinal nerve roots, causing paralysis, paresthesia and pain. We report the case of a 57-year-old male athlete suffering from burner syndrome related to a lumbar nerve root. He presented with prolonged pain and partial paralysis of the right leg after a skewed landing during the long jump. He was initially misdiagnosed since the first magnet resonance imaging was normal whereas electromyography showed denervation. The insurance company refused to pay damage claims. Partial recovery was achieved by pain medication and physiotherapy. Burner syndrome is an injury of physically active individuals of any age and may appear in the cervical and lumbar area. MRI may be normal due to the lack of complete nerve transection, but electromyography typically shows pathologic results.

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.126-135
• /
• 2018

Wood decay fungi were collected in 47 different locations in eight provinces of South Korea from 2011 to 2013. One thousand and five hundreds three fruiting bodies of wood-decay fungi were collected, identified, and classified into 2 phyla, 7 classes, 19 orders, 56 families, 159 genera and 365 species. The most dominant genus and species found were Trametes and T. versicolor. The highest species diversity was found in broad-leaved forest (273 species), and was also found at elevations of 500-1,000 m (227 species). A total of 333 species were collected from broad-leaved trees, 87 species from coniferous trees, and 55 species were collected from both forest types. Gymnopilus liquiritiae was the most dominant species in coniferous trees, while T. versicolor, which was mostly collected from tree trunks below 500 m in elevation, was dominant in broad-leaved trees. Results from the quantitative cluster analysis of wood decay fungi showed that the highest species diversity index was 1.80 in the mixed forests, while the highest similarity among forest types was shown between the broad-leaved and mixed forests.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.39-41
• /
• 1971

Apple bitter rot caused by Glomerella cingulata has been known to occur annually on the fruits of previously infected twigs and the trunks. This study was carried out to ensure whether the pathogen overwinters in the form of perithecium or not. Since the acervuli of the pathogen were formed in inoculated apple trees, it would be possible that the pathogen could overwinter on the twigs, Ascigerous stage was found both under the cuticle of the infected trunk and in outer layers of rotted fruits. Therefore, it could be concluded that the pathogen overwintered in the form of perithecium is a primary inoculum in next year. Ascigerous stage of the appfe bitter rot organism was observed for the first time in Korea.