• 박물관보존과학
• /
• 제5권
• /
• pp.49-57
• /
• 2004

성덕대왕신종은 서기 771년에 완성되었으며 규모에 있어서나 예술적인 수준에 있어서 탁월한 걸작품으로서 우리 청동문화의 정수이다. 그러나 성덕대왕신종을 주조하기 위해 어디에서 원료를 입수하여 어떻게 배합하고 주조했는지에 대한 사료가 남아있지 않아 성덕대왕신종을 깊이 있게 이해하는 데 한계가 있다. 본 연구는 국립경주박물관에서 성덕대왕신종에 대한 안전진단의 일환으로 점검 과정 중 신종 내부에 돌출된 부분에서 채취한 시료 3점의 분석결과를 정리한 것이다. 성덕대왕신종을 제작하기 위한 원료의 배합비, 주조 당시의 금속조직, 원료의 산지 등에 중점을 두고 조사하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.26.3-26.3
• /
• 2008

This research develops a GPS-based formation-flying testbed (FFTB) for formation navigation and control. The FFTB is a simulator in which spacecraft simulation and modeling software and loop test capabilities are integrated for test and evaluation of spacecraft navigation and formation control technologies. The FFTB is composed of a GPS measurement simulation computer, flight computer, environmental computer for providing true environment data and 3D visualization computer. The testbed can be simulated with one to two spacecraft, thus enabling a variety of navigation and control algorithms to be evaluated. In a formation flying simulation, GPS measurement are generated by a GPS measurement simulator to produce pseudorange, carrier phase measurements, which are collected and exchanged by the flight processors and subsequently processed in a navigation filter to generate relative and/or absolute state estimates. These state estimates are the fed into control algorithm, which are used to generate maneuvers required to maintain the formation. In this manner, the flight processor also serves as a test platform for candidate formation control algorithm. Such maneuvers are fed back through the controller and applied to the modeled truth trajectories to close simulation loop. Currently, The FFTB has a closed-loop capability of simulating a satellite navigation solution using software based GPS measurement, we move forward to improve using SPIRENT GPS RF signal simulator and space-based GPS receiver

• Korean Journal of Radiology
• /
• 제22권2호
• /
• pp.168-178
• /
• 2021

Objective: To provide an automatic method for segmentation and diameter measurement of type B aortic dissection (TBAD). Materials and Methods: Aortic computed tomography angiographic images from 139 patients with TBAD were consecutively collected. We implemented a deep learning method based on a three-dimensional (3D) deep convolutional neural (CNN) network, which realizes automatic segmentation and measurement of the entire aorta (EA), true lumen (TL), and false lumen (FL). The accuracy, stability, and measurement time were compared between deep learning and manual methods. The intra- and inter-observer reproducibility of the manual method was also evaluated. Results: The mean dice coefficient scores were 0.958, 0.961, and 0.932 for EA, TL, and FL, respectively. There was a linear relationship between the reference standard and measurement by the manual and deep learning method (r = 0.964 and 0.991, respectively). The average measurement error of the deep learning method was less than that of the manual method (EA, 1.64% vs. 4.13%; TL, 2.46% vs. 11.67%; FL, 2.50% vs. 8.02%). Bland-Altman plots revealed that the deviations of the diameters between the deep learning method and the reference standard were -0.042 mm (-3.412 to 3.330 mm), -0.376 mm (-3.328 to 2.577 mm), and 0.026 mm (-3.040 to 3.092 mm) for EA, TL, and FL, respectively. For the manual method, the corresponding deviations were -0.166 mm (-1.419 to 1.086 mm), -0.050 mm (-0.970 to 1.070 mm), and -0.085 mm (-1.010 to 0.084 mm). Intra- and inter-observer differences were found in measurements with the manual method, but not with the deep learning method. The measurement time with the deep learning method was markedly shorter than with the manual method (21.7 ± 1.1 vs. 82.5 ± 16.1 minutes, p < 0.001). Conclusion: The performance of efficient segmentation and diameter measurement of TBADs based on the 3D deep CNN was both accurate and stable. This method is promising for evaluating aortic morphology automatically and alleviating the workload of radiologists in the near future.

• 지질공학
• /
• 제33권4호
• /
• pp.573-586
• /
• 2023

절리성 암반은 절리 또는 연약면에 의해 역학적인 이방성이 발현될 수 있으며 절리성 암반의 강도 및 변형 특성에 대한 이해는 지질공학 현장에서 주된 관심사이다. 본 연구는 마찰재료로 채택된 석고를 이용하여 단일절리를 포함하는 시료를 성형하고 진삼축시험을 통하여 진삼축 조건의 강도 및 변형 특성을 고찰하였다. 동일한 조건에서 수행한 개별요소법 기반의 삼차원 수치해석은 진삼축시험을 통하여 검증되었으며 타당성이 확보되었다. 수치해석 결과는 절리의 방향성과 더불어 현장의 주응력 조건이 절리성 암반의 강도 및 변형 특성 연구에 있어서 필수적인 요소임을 지시한다. 수치해석을 통하여 절리의 경사각 변화에 따라 산정한 횡등방성 암반의 강도는 중간주응력이 강화함에 따라 유의미한 증가를 나타내며, 증가의 폭은 절리의 경사 조건에 큰 영향을 받는다. 또한, 절리의 경사방향과 두 수평 주응력 방향 간의 상대적인 관계는 횡등방성 암반의 강도특성을 좌우하는 요인이다. 두 개의 절리군을 포함하는 암반의 강도는 경사가 더욱 급한 절리군이 전체 암반의 강도를 좌우한다. 두 절리군 중 한 절리군의 연속성이 짧아 암교 효과를 발휘하면 연속성이 상대적으로 긴 절리군의 방향성이 전체 암반의 강도를 좌우할 수 있다. 절리성 암반에 대한 기존의 삼차원 파괴기준식은 적용성 측면에서 한계도 있지만, 수치해석이 이를 보완하는 데 유용하게 활용될 수 있다.

• 대한임상검사과학회지
• /
• 제38권1호
• /
• pp.16-21
• /
• 2006

Parallel testing means ordering a number of tests at the same time so abnormalities in any of the tests can be found quickly and used in making the diagnosis. This is a good medical strategy to eliminate diseases and it is relatively inexpensive if all the tests are potential sources of information and performed on the same analyzer. In regression, the equation for the straight line is recast as y = bx + a. This change in terminology leads to confusion. Here a is the y-intercept or constant and b is the coefficient or slope of the line. A few more words of caution about regression - as in all of statistics there are certain assumptions: the x value is a true measure, both X and Y distributions are normal, and homoscedasticity, i.e., the variance of y is the same for each value of x. In this study the linearity classification made by different scientists were always in agreement. Typical examples of curves that were considered linear are presented in Fig. 1-5. Because these automated procedures values were usually within five percent of each other the curvature could be easily detected. The plot of the WBC, RBC, hemoglobin, hematocrit and platelet concentrations from approximately 74.4 to $0{\times}10^3/{\mu}L$ and $80.4-0{\times}10^3/{\mu}L$, $5.6-0{\times}10^6/{\mu}L$ and $6.1-0{\times}1106/{\mu}L$, 18.3-0 g/dL and 19.0-0 g/dL, 54.1-0% and 56.8-0% and 642.0 to $0.03{\times}10^3{\mu}L$ and $754.0-0{\times}10^3/{\mu}L$ on the ADVIA 2120 C Versus and A and B typical of an acceptable linear study as shown in Fig. 1-5. The grand mean of R2, intercept and slope is 0.99898, 0.99459 and 1.54626.

• 한국통신학회논문지
• /
• 제33권5C호
• /
• pp.413-421
• /
• 2008

이 논문은 최소 평균제곱오차 라플라스 양자기가 평균이나 표준편차가 불일치된 신호에 적용될 때 야기되는 평균제곱오차 왜곡과 신호대 양자화 잡음비의 점근식을 유도한다. 이들 식은 양자점의 개수 N, 평균값의 변이량 $\mu$, 양자기 설계 기준으로 사용된 표준편차에 대해 적용되는 신호의 표준편차 비율 $\rho$로써 왜곡과 신호대잡음비의 직접적인 관계를 명확히 표시하고 있다. 수치 결과에 의하면, 논문의 주 근사식은, 요율 R=$log_2N$이 6 이상인 경우에, 상당히 넓은 $\mu$와 $\rho$에 대해 신호대잡음비 참값의 1% 이내의 값을 예측하여 정확도가 아주 높은 것으로 판단된다. 이 논문을 통해 새로 발견된 점은 첫째 ${\rho}>3/2$인 분산 강불일치의 경우에 신호대잡음비는 $9/\rho$ dB/bit 비율로 증가한다는 것과 둘째 최적 균일양자기는, 비록 최적으로 설계되었지만, 분산 임계불일치보다 조금 더 불일치된 것임을 밝힌 점이다. 또 $\mu$에 의한 신호대잡음비 손실은 비교적 크지 않은 것이 관찰되었다. 여기에 유도된 공식들은, 단구간 분산이 변하는 라플라스 분포로 잘 모형되는 음성이나 음악 신호를 하나의 양자기로 양자화하는 경우에 쓰임새가 있을 것으로 사료된다.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.607-612
• /
• 2007

In this study, we investigated the variations of the kinetic coefficients and Chemical Oxygen Demand (COD), N and P mass used for assimilation of a sequencing batch reactor (SBR) system with the variation of SRTs; SRTs of 7.5, 10.0, 12.5, 15.0 and 20.0 days were tested in one cycle of SBR operation to determine the optimum conditions for the operation of the SBR and estimate its COD, nitrogen and phosphorus removal efficiencies. The SBR system was operated under the conditions as follows: an operation time of 6 hours per cycle, a hydraulic retention time (HRT) of 12 hours, an influent COD loading of $0.4kg/m^3/day$, and an influent nitrogen loading of $0.068kgT-N/m^3/day$. The yield coefficient (Y) and decay rate coefficient ($k_d$) were estimated to be 0.4198 kgMLVSS/kgCOD and $0.0107day^{-1}$ by calculating the removal rate of substrate according to the variation of SRT. Considering total nitrogen amount removed by sludge waste process, eliminated by denitrification, and in clarified water effluent with reference to 150 mg/cycle of influent nitrogen amount, the percentage of nitrogen mass balance from the ratio of the nitrogen amount in effluent (N output) to that in influent (N input) for Runs 1~5 were 95.5, 97.0, 95.5, 99.5, and 95.5%, respectively, which is well accounted for, with mass balances close to 100%.

• Journal of Ginseng Research
• /
• 제36권3호
• /
• pp.298-307
• /
• 2012

Panax ginseng has been cultivated for centuries, and nine commercial cultivars have been registered in Korea. However, these nine elite cultivars are grown in less than 10% of ginseng fields, and there is no clear authentication system for each cultivar even though their values are higher than those of local landraces. Here, we have developed 19 microsatellite markers using expressed gene sequences and established an authentication system for all nine cultivars. Five cultivars, 'Chunpoong', 'Sunpoong', 'Gumpoong', 'Sunun', and 'Sunone', can each be identified by one cultivar-unique allele, gm47n-a, gm47n-c, gm104-a, gm184-a (or gm129-a), and gm175-c, respectively. 'Yunpoong' can be identified by the co-appearance of gm47n-b and gm129-c. 'Sunhyang' can be distinguished from the other eight cultivars by the co-appearance of gm47n-b, gm129-b, and gm175-a. The two other cultivars, 'Gopoong' and 'Cheongsun', can be identified by their specific combinations of five marker alleles. This marker set was successfully utilized to identify the cultivars among 70 ginseng individuals and to select true F1 hybrid plants between two cultivars. We further analyzed the homogeneity of each cultivar and phylogenetic relationships among cultivars using these markers. This marker system will be useful to the seed industry and for breeding of ginseng.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권1호
• /
• pp.25-29
• /
• 2018

The effect of soil grinding on total As and Pb concentrations determined by aqua regia method was examined. Among six field-collected, air-dried soil samples tested, soils A, B, C, and E were directly sieved through a $150-{\mu}m$ sieve without grinding and showed 2.18 to 3.03 times higher total As concentrations and 2.62 to 3.45 times higher total Pb concentrations than those of the soil samples prepared to allow all soil particles to pass through the $150-{\mu}m$ sieve by grinding. The reason can be ascribed to the fact that those soils contain fine particles (i.e., < $150{\mu}m$ in diameter) only 4.6 to 6.8% of the total soil weights. On the other hand, for D and F soils, fine particles smaller than $150{\mu}m$ accounted for 57 and 46%, respectively, so that the effect of grinding on As and Pb concentrations were relatively low (As: 1.15 and 1.23 times, Pb: 1.36 and 1.49 times, respectively). The result demonstrates that grinding prior to $150-{\mu}m$ sieving is necessary to ensure the homogeneity of soil samples and hence to obtain more accurate heavy metal concentrations in soils. This is especially true for soil samples with less fine soil particles and/or microaggregates (i.e., below $150{\mu}m$).

• 한국측량학회지
• /
• 제30권2호
• /
• pp.117-124
• /
• 2012

최근에 노후화된 도시정비사업으로 토지의 집약적 이용을 위해 아파트 및 공동주택을 초고층 및 고층 아파트 구조물로 재건축 승인함에 따라 인근 주거지역의 일조권 침해에 따른 사회문제로 대두되고 있다. 특히, 교육시설에 있어서의 일조량 침해에 따른 교육환경 여건은 많은 문제점을 내포하고 있다. 따라서, 본 연구에서는 이러한 교육환경 일조량 분석을 위해 Auto $CAD^{(R)}$ 프로그램을 이용하여 교육시설물에 대하여 3차원 모델링으로 구성하였다. 그리고, 시뮬레이션 기법으로 교육시설에 있어서 창과 운동장을 채광기준면으로 설정하여 태양의 움직임에 따른 진태양시의 일조량을 아침 8:00에서 오후 4:00까지1분 단위로 계산하였다. 또한, 아파트 신축공사 전 후의 피해에 따른 교육시설의 일조환경을 수치화하였고 일영투사법에 의해 제작된 영상과 비교하여 교육환경 일조량을 검증할 수 있었다. 향후 이러한 시뮬레이션 기법을 활용하여 교육환경일조량 분석에 효율적으로 사용될 수 있을 것으로 기대된다.