• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.255-269
• /
• 2006

The differentiated services(DiffServ) architecture provides packet level service differentiation through the simple and predefined Per-Hop Behaviors(PHBs). The Assured Forwarding(AF) PHB proposed as the assured services uses the RED-in/out(RIO) approach to ensusre the expected capacity specified by the service profile. However, the AF PHB fails to give good QoS and fairness to the TCP flows. This is because OUT(out- of-profile) packet droppings at the RIO buffer are unfair and sporadic during only network congestion while the TCP's congestion control algorithm works with a different round trip time(RTT). In this paper, we propose an Adaptive Regulating Drop(ARD) marker, as a novel dropping strategy at the ingressive edge router, to improve TCP fairness in assured services without a decrease in the link utilization. To drop packets pertinently, the ARD marker adaptively changes a Temporary Permitted Rate(TPR) for aggregate TCP flows. To reduce the excessive use of greedy TCP flows by notifying droppings of their IN packets constantly to them without a decrease in the link utilization, according to the TPR, the ARD marker performs random early fair remarking and dropping of their excessive IN packets at the aggregate flow level. Thus, the throughput of a TCP flow no more depends on only the sporadic and unfair OUT packet droppings at the RIO buffer in the core router. Then, the ARD marker regulates the packet transmission rate of each TCP flow to the contract rate by increasing TCP fairness, without a decrease in the link utilization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.79-95
• /
• 2016

In order to improve the Quality-of-Service (QoS) of latency sensitive applications in next-generation cellular networks, multi-path is adopted to transmit packet stream in real-time to achieve high-quality video transmission in heterogeneous wireless networks. However, multi-path also introduces two important challenges: out-of-order issue and reordering delay. In this paper, we propose a new architecture based on Software Defined Network (SDN) for flow aggregation and flow splitting, and then design a Multiple Access Radio Scheduling (MARS) scheme based on relative Round-Trip Time (RTT) measurement. The QoS metrics including end-to-end delay, throughput and the packet out-of-order problem at the receiver have been investigated using the extensive simulation experiments. The performance results show that this SDN architecture coupled with the proposed MARS scheme can reduce the end-to-end delay and the reordering delay time caused by packet out-of-order as well as achieve a better throughput than the existing SMOS and Round-Robin algorithms.

• Journal of the Korean association of regional geographers
• /
• v.11 no.1
• /
• pp.1-18
• /
• 2005

Since the emerging period in !be Greek era, geography bas been defined as an empirical science in which travel and field trip bas been regarded as its major method for acquiring geographical knowledge or discovering geographical facts on the earth surface. In the contemporary geography, however, this kind of empiricism has been reduced to logical positivism which pursues rigid geographical laws, while diverse implications for empiricism (especially, that implied in the mythic imagination) have been ignored. On the other hand, recently a lot of books on trip for exploring regional cultural environments from the local to the global level have been poured out from outside of geography, and place-marketing has gained some attraction as a new method or strategy for regional development This paper is to consider diverse methodological implications of experience through geographical exploration especially hath from the standpoint of empirical geography and of humanistic geography, and the look on methodologically importance and limitations of place-marketing for regional development In conclusions, it is emphasized that those methodologies should be put together for a genuine exploration of regional cultural environment, and that place-marketing should be understood as a movement for rediscovering regional identity.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.34-41
• /
• 1999

In this paper, hot carrier induced performance degradation of peripheral circuits in memory devices such as static type imput buffer, latch type imput buffer and sense amplifier circuit has been measured and analyzed. The used design and fabrication of the peripheral circuits were $0.8 {\mu}m$ standard CMOS process. The analysis method is to find out which device is most significantly degraded in test circuits by using spice simulation, and then to characterize the correlation between device and circuit performance degradation. From the result of the performance degradation of static type input buffer, the trip point was increased due to the transconductance degradation of NMOS. In the case of latch type input buffer, there was a time delay due to the transconductance degradation of NMOS device. Finally, hot carrier induced the decrease of half-Vcc voltage and the increased of sensing voltage in sense amplifier circuits have been measured.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.87-97
• /
• 2013

This study tried to explore the quantitative travel heterogeneity between elderly and non elderly people, focusing on urban and rural areas in south Chungcheong province. For the analysis, a PLS(Partial least square) model is applied with economic and traffic environment characteristics of the urban and rural areas. The characteristics of elderly and non elderly people in the urban and rural areas are derived from the 2011 person trip survey. As a result, the study found out that the key factors affect on elderly people in the urban and rural areas are bus operation interval, number of bus operation routes, number of household member, and a monthly average income of household. In case of non elderly people, areas economic factors such as GRDP, the rate of economic activity, and employment status as well as those of elderly people. Meanwhile, female elderly people in rural area have more sensitivity compared to male elderly people and the gender heterogeneity is not revealed in non elderly people.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.218-225
• /
• 2005

Although Snoop protocol can enhance TCP throughput efficiently in a wired-cum-wireless environment, it has a problem in performing local packet retransmissions under a burst error-prone wireless link. AT-Snoop protocol is proposed to cope with this Snoop protocol's problem by adopting adaptive timer. In this paper, TCP throughputs of AT-Snoop protocol have been analyzed with varying wireless link conditions and the ways of setting parameters of AT-Snoop protocol for higher TCP throughput are found out through computer simulations. From the simulation results, AT-Snoop protocol's two parameters, local retransmission threshold value and local retransmission timeout value, are closely related with the fading changing rate. To get higher TCP throughput, local retransmission threshold value and local retransmission timeout value should be set to a little bit larger values than average WSRTT(Wireless Smoothed Round Trip Time) and mean bad period of the wireless link, respectively.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.8
• /
• pp.1997-2012
• /
• 1998

It is necessary to find out the parallelism in tlle sequential Java program to execute it on the parallel machine. The loop is a fundamental source to exploit parallelism as it process a large portion of total execution time in sequential Java program on the parallel machine. However, a complete parallel execution can hardly be achieved due to data dependence. This paper proposes the method of exploiting the implicit parallelism by structuring a dependence graph through the analysis of data dependence in the existing Java programming language having a nested loop structure. The parallel code generation method through the restructuring compiler and also the translation method of Java source program into multithread statement. which is supported by the Java programming language itself, are proposed here. The perforance evaluatlun of the program translaed into the thread statement is conducted using the trip cunt of loop and the trip Count of luop and the thread count as parameters The resttucturing compiler provides efficient way of exploiting parallelism by reducing manual overhead conveliing sequential Java program into parallel code. The execution time for the Java program as a result can be reduced un the parallel machine.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.604-609
• /
• 2020

The purpose of this study is to check the priority control status of the current operation process alarm by comparing the priority of the alarm set up in PV high trip point, which is being installed and operated in the domestic petrochemical industry, with the criteria presented in ISA 18.2 International Standard or EEMUA 191 Guidelines. In the event of a process problem, excessively set high alarm is provided to the driver in a short period of time, making it difficult to identify the alarm that needs to be handled first. As a result, it is likely that the operator will not be able to carry out appropriate actions within the specified time frame, and many cases have been reported leading to unexpected process shutdowns or process accidents. Therefore, this study aims to introduce international standards related to alarm management and identify the level of alarm control used at the domestic petrochemical industry site to inform potential risks that may occur in the petrochemical process of the national industrial complex in the future and suggest ways to reduce risk factors. This paper was submitted to Professor Lee Inbeom's retirement anniversary issue.

• Journal of The Korean Association For Science Education
• /
• v.19 no.3
• /
• pp.461-470
• /
• 1999

The purpose of this study was to investigate teachers' perception about 'Science Field Trip(SFT) to Korean historical sites'. Ninety-seven teachers were asked to reply the questionnaire about SFT to Korean historical sites. This questionnaire was divided into three parts: educational value, teaching method, and difficulty of management. Firstly, teachers indicated that SFT to Korean historical sites had much educational value in that it could give students chances to understand Korean culture, to acquire investigative process skills, to experience divergent investigation and cooperative learning, to raise integrated thinking skill concerning science and other subjects, and to learn contents related with science curriculum. It also had advantages of caring for students out of school and giving the information for future occupation. Secondly, teachers suggested the desirable teaching method: teachers' explanation about SFT to Korean historical sites with worksheets before it, students' group work during it, and the presentation and discussion after it. Finally, the most frequent answer in the difficulty of management was the lack of teaching materialsfor SFT to Korean historical sites.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.8-13
• /
• 2014

The purpose of this study is to analyze the damage pattern when overcurrent is applied to a thermal magnetic type molded case circuit breaker (MCCB) using a Primary Current Injection Test System (PCITS). When an overcurrent of 150 A was applied to the PCITS for 5 seconds with the trip bar of an MCCB being damaged, it was found that the surface of the temperature control device (bimetallic strip) positioned at the right was significantly carbonized. When an overcurrent of 300 A was applied to the PCITS for 5 s under the same conditions, the entire temperature control device was deteriorated, becoming flattened and in close contact with the MCCB. When an overcurrent of 450 A was applied to the PCITS for 5 s, the coil of the temperature control device was melted and disconnected. In addition, it was observed that the contacts, the enclosure and upper cover were deformed and there was a trace of carbonization on them. When approximately 3 s had elapsed after an overcurrent of 600 A was applied, white smoke occurred inside the MCCB and a flame was radiated out, after which the overcurrent supply stopped with "phutt" (whomp) sound. It was observed that when the same type of MCCB is damaged by a general flame, the surfaces of its handle, terminal, arc divider (extinguisher) and temperature control device were carbonized uniformly. In addition, it was found that the trip bar of the operating mechanism was melted down and the metal operation pin was moved while being tripped.