• Nuclear Engineering and Technology
• /
• v.14 no.2
• /
• pp.70-77
• /
• 1982

The crosslinking reaction and oxidative stability of low-density polyethylene were studied in the presence of trifunctional monomers and antioxidants with electron beam. The trifunctional monomers used in this study are Trimethylolpropane triacrylate(TMPTA), Trimethylolpropane trimethacrylate(TMPTM) and Triallyl cyanurate(TAC). And the antioxidants are Irganox 1010 (Pentaerythritoltetrakis[3-(3,5-di-t-butyl-4-hydroxyphenyl)-propionatel]), Santo-nox R(4,4'-Thio-bis(3-methyl-6-t-butylphenol)), Nocrac D(N-phenyl-$\beta$-naphthylamine) and Bis-phenol A(4,4'-Isopropylidene bisphenol). Among the monomers, TMPTA is the best crosslinking agent and prvides polyethylene with oxidative stability. Among the antioxidants, Nocrac D is the best antioxidant for polyethylene.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2005

Chlorine-containing modified polyester polyols were synthesized by two-step condensation reactions. Intermediate was synthesized by the esterification of monochloroacetic acid with trimethylolpropane in the first step. Polycondensation of the intermediate (MCAOs), 1,4-butanediol, and trimethylolpropane with adipic acid was carried out. Two-component polyurethane (PU) coatings were prepared by blending MCAOs and IPDI-isocyanurate. There new flame-retardant coatings showed various properties comparable to other non-flame-retardant coatings. They were superior to flammable coatings from the experimental results showing rapid and 10 to 13 hours of pot-life. Coatings with 30wt% monochloroacetic acid was not flammable by the vertical flame retardancy test.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.68-74
• /
• 2005

In this work, polymerization conditions of the gel polymer electrolyte (GPE) were studied to obtain better electrochemical performances in a lithium-ion polymer battery. When the polymerization temperature and time of the GPE were 70$^{\circ}C$ and 70 min, respectively, the lithium polymer battery showed excellent a rate capability and cycleability. The TMPETA (trimethylolpropane ethoxylate triacrylate)/TEGDMA (triethylene glycol dimethacrylate)-based cells prepared under optimized polymerization conditions showed excellent rate capability and low-temperature performances: The discharge capacity of cells at 2 Crate showed 92.1 % against 0.2C rate. The cell at -20 $^{\circ}C$ also delivered 82.4 % of the discharge capacity at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.511-514
• /
• 2004

본 연구에서는 trimethylolpropane triacrylate(TMPTA)를 사용한 겔폴리머전해질의 전기화학적 특성에 대하여 조사하였다. 겔고분자전해질의 상온 이온전도도는 약 $5.0{\times}10^{-3}S{\cdot}cm^{-1}$이었으며, 온도가 높아짐에 따라 이온전도도는 증가하였다. TMPTA계 겔고분자전해질은 4.5V(vs. $Li/Li^+$)까지의 전위영역에서 우수한 전기화학적 안정성을 나타내었으며, TMPTA계 겔고분자전해질을 적용한 리튬이온폴리머전지의 고율 및 저온 방전특성은 양호하였다. 또한 사이클수명도 200 사이클이 진행된 후에도 초기용량의 약 94%라는 높은 용량유지율을 나타내었다.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1046-1051
• /
• 1999

Cure behavior and thermal stability of the different ratio of diglycidylether of bisphenol A(DGEBA)/trimethylolpropane triglycidylether(TMP) epoxy blends initiated by 1 wt % N-benzylpyrazinium hexafluoroantimonate (BPH) as a cationic latent catalyst were studied using DSC and TGA, respectively. Latent properties were performed by measurement of the conversion as a function of temperature using dynamic DSC. Dynamic DSC thermograms of DGEBA/TMP blends revealed that the weak peak was formed by complex formation between the hydroxyl groups in DGEBA and BPH, and between epoxides and BPH in low temperature ranges. The strong peak was considered as an exothermic reaction by the formation of three-dimensional network in high temperature ranges. Isothermal DSC revealed that the reaction rate of the blends was found to be higher than that of the neat TMP. The thermal stabilities in the cured resins were increased with increasing the DGEBA content. These results could be interpreted in terms of the stable aromatic structure, existence of hydroxyl group and high molecular weight of DGEBA.

• Journal of Adhesion and Interface
• /
• v.5 no.4
• /
• pp.1-8
• /
• 2004

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate, acrylic acid and methyl methacrylate by solution polymerization, and trimethylolpropane triacrylate. The PSAs were evaluated by adhesion strength with varying UV dose, and also glass transition temperature ($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased adhesion strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.269-270
• /
• 2002

Antiwear(AW) properties of phoshphonic acid derivatives for trimethylolpropane (TMP) esters were investigated under boundary conditions. AW effect of dialkyl phosphonates depends on polarity of base fluid. They provide good AW performance in less polar TMP esters, whereas their AW effect is not sufficient in polar TMP esters. Amine salts of phosphonic acid were developed as new AW additiνe system for TMP esters. They provide excellent AW performance even in polar TMP esters.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.621-626
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hollow micro-spheres with high heat transfer resistance. The UV curable resin system consisting of hexa aliphatic urethane acrylate (UP118), trimethylolpropane triacrylate (TMPTA), 1,6-hexanediol diacrylate (HDDA), and photoinitiator (Irgacure184) was employed as an organic binder. The glass substrates were coated by the prepared composites via bar coating method and cured under UV radiation. The optical transparency, thermal insulation property, adhesion, and surface hardness of the glass coated with composites containing different type of micro-spheres were investigated. The incorporation of micro-spheres with only 20 vol% of content resulted in remarkable improvement in the thermal insulation property of the coated glass. In addition, the transparent coated glass with light transmittance of about 80% could be obtained when silica micro-sphere (SP) was used as a thermal barrier.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.268-277
• /
• 2001

The MDI(4,4'-diphenyl methane diisocyanate) was mixed with PPG, PEG and trimethylolpropane(TMP) respectively to prepare polyurethane resin. The various physical properties were measured for the mixtures. The gel-time was shortened by adding of PEG and TMP The molecular weight made a greater influence on the gel-time than the number of functional groups. The NCO-OH reaction was more active and faster than the NCO-NCO reaction. The hardness was influenced by crosslinking-density and molecular structure. The NCO-OH reactions yielded the flexible films and the NCO-NCO reactions yielded the brittle films. The increase of crystallinity and shrinkage induced the low adhesion ratio but the adding of TMP induced the high adhesion ratio. The flame-retardancy was influenced by quantity and kinds of flame-retardant. IXOL B-251 was the most excellent among the flame-retardants employed in this study. TCCP was partially separated because of the lack of solubility.