• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.195-201
• /
• 1997

The present paper describes the effect of dry mixed grinding on kaolinite-aluminum trihydroxide mixture with a planetary ball mill before sintering and its influence on mullite formation during sintering. The size reduction of the mixture is market in the early stage of grinding and the obtained fine particles agglomerate subsequently with an increase of grinding time. The crystal structure of the mixture is collapsed easily into an amorphous one by planetary ball milling, of which amount increases with an increase of grinding time. Only mullite phase except for anatase as an inherent impurity in kaolinite appeared in the sintered body of the mixtures with mixed grinding as relatively lower temperature 1523K, while corundum, cristobalite, and Al-Si spinel phases, besides mullite were formed in the sintered body of the mixture without mixed grinding. Therefore, the mixed grinding treatment is very effective to improve the homogeneous mixing and disp-ersion of the mixture of raw materials on a micro scale and to decrease the thermal decomposition tem-perature by crystal structure change of them so as to obatin direct preparation of mullite with high purity at relatively low temperature.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.987-993
• /
• 2000

Bayer 공정은 보오크사이트로부터 수산화알루미늄을 추출시키는 가장 일반적인 방법으로서 공정 조건에 따라 수산화알루미늄의 1차입자경, 입도분포도 및 생산효율 등이 달라지게 된다. 이러한 수산화알루미늄의 특성에 영향을 미치는 석출인자로는 가성소다 농도, 석출온도, 종자투입량 및 알루미나와 가성소다 농도비 등이 있다. 본 실험에서는 이러한 각각의 인자들이 수산화알루미늄 석출시 입자성장에 미치는 영향을 연구하였다. 그 결과 입자성장에 가장 큰 영향력을 미치는 인자는 석출온도와 종자 투입량이며 A/C비 및 가성소다 농도는 큰 영향을 주지 않음을 알 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.822-828
• /
• 2001

Bayer process is based on the extraction of aluminium trihydroxide from bauxite. The process is operated with the several criteria such as primary crystal size, particle size distribution and yield etc.. In this study basing on the previous results, an investigation on the effect of chemical grade and smelting grade aluminium trihydroxide precipitation condition were undertaken. As a result, particle size was 42∼44${\mu}$m form chemical grade product and 74∼77${\mu}$m for smelting grade product. The yield and solubility by acid of chemical grade product was higher than smelting grade product. The attrition index of smelting grade product was lower than that of other commercial product because primary crystal size of the smelting grade product was small.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.267-273
• /
• 2001

Bayer process는 보오크사이트로부터 수산화알루미늄을 추출시키는 가장 일반적인 방법으로서 공정 조건에 따라 수산화알루미늄의 1차입자경, 입도분포도 및 생산효율 등이 달라지게 된다. 이러한 수산화알루미늄의 특성에 영향을 미치는 석출인자로는 석출시간, 석출온도차($\Delta$T), 종자 첨가시 함께 투입되는 공정순환액(spent liquor) 및 종자크기 등이 있다. 본 실험에서는 이러한 각각의 인자들이 수산화알루미늄 석출시 입자성장에 미치는 영향을 연구하였다. 그 결과 석출시간이 길수록, 정온석출 보다는 냉각석출의 경우가, 또한 공정순환액이 첨가되지 않을수록 석출율은 증가하나 입자크기에는 영향을 주지 않았으며 입자성장에 가장 큰 영향력을 미치는 인자는 투입 종자크기로 나타났다.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.279-285
• /
• 2015

This study examined the mechanical properties and the flame retardant properties of CR rubber containing inorganic flame retardant with various contents of aluminium trihydroxide (ATH, $Al(OH)_3$). The content of aluminium trihydroxide was added in 0, 30, 50, 70 and 100 phr for T1~T5 samples. It was found that increasing the amount of addition over 30 phr resulted in decreasing the mechanical properties. On the other hand in oxygen index measurements T1 sample showed a value of 38.6%, indicating the improvement of flame retardant properties showed a value of 49.7~64.2%. In case of burn test, it was confirmed that CR rubber containing over ATH 50phr content showed performance corresponding to that of first grade fire-resistance.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.433-440
• /
• 2015

Aluminum trihydroxide (ATH) has been commonly employed as a flame retardant for ethylene vinyl acetate (EVA) copolymers. In the present work, ATH was obtained from a recycling process of multi-layer packaging film wastes. EVA/ATH composite samples were prepared using a two roll-mill and flame retardancy of EVA/ATH composites were examined using limiting oxygen index (LOI) and flame retardancy test (UL94). We observed excellent flame retardancy in case of adding 150 phr or more of recycled ATH to EVA. Particle size and specific surface area play crucial roles in LOI value and UL-94 classification of the EVA/ATH composites. Smaller particle size and higher specific surface area of ATH was found out to improve the flame retardancy. Regarding tensile properties, crosslinked EVA/ATH compounds which is practically used for electric cables had similar to or even better tensile property values than the ones without ATH.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1608-1615
• /
• 2016

This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.147-153
• /
• 2016

Polyvinyl chloride (PVC) has been used as a general-purpose polymer because of its lower cost, good durability and mechanical properties compared to other materials. However, PVC is vulnerable to heat deformation and generates a toxic gas like hydrogen chloride. Therefore, it is important to delay or prevent the flame retardancy and thermal degradation of the PVC during the processing. It was reported that aluminum trihydroxide (ATH) improved flame retardancy as well as smoke inhibition of the virgin polymer. In this study, PVC composites by addition of ATH were compounded in a modular intermeshing co-rotating twin screw extruder. The PVC composites with different concentrations of ATH (0~5 phr) were analyzed. Flame retardancy of the PVC composite significantly increased depending on the ATH concentration. LOI of the composite also increased with the concentration of ATH. There were no significant differences for the thermal properties of the PVC composites with ATH.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.87-93
• /
• 2010

The fire resistive materials are used to resist from fire accidents in the building. In this study silicone rubber/inorganic flame retardant composites were prepared by mechanical stirring method, using aluminium trihydroxide(ATH, $Al(OH)_3$) and magnesium dihydroxide(MDH, $Mg(OH)_2$) as synergistic fire-resistant additives. The thermal properties of the fire resistant composites were characterized by thermogravimetric analysis(TGA). In addition, rheological properties were observed by rheometer and fire-resistant properties were tested by gas torch. Through this study, we realized that the silicone rubber containing ATH, MDH increased the performance of fire-resistance.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1085-1093
• /
• 1998

Amorphous alumina powder prepared by the fast calcination of aluminum trihydroxide(Al(OH)3 gibbsite) for 0.5 second at 580$^{\circ}C$ was investigated rehydration propeties. Phase composition crystal size and mor-phology surface area pore volume and pore size distribution of pesudo-boehmite and bayerite crystals changed with temperature time water/alumina ratio and particle size when amorphous alumina rehydrated with water. Phase compositions were examined with XRD and DTA and crystal sized morphologies were investigaed with SEM and TEM. Also rehydration properties of amorphous alumina were in-vestigated by measuring the surface area pore volume and pore size distribution.